Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 295 insertions, 0 deletions

diff --git a/arch/powerpc/boot/cpm-serial.c b/arch/powerpc/boot/cpm-serial.c
new file mode 100644
index 000000000..dfb56829c
--- /dev/null
+++ b/arch/powerpc/boot/cpm-serial.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CPM serial console support.
+ *
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * It is assumed that the firmware (or the platform file) has already set
+ * up the port.
+ */
+
+#include "types.h"
+#include "io.h"
+#include "ops.h"
+#include "page.h"
+
+struct cpm_scc {
+	u32 gsmrl;
+	u32 gsmrh;
+	u16 psmr;
+	u8 res1[2];
+	u16 todr;
+	u16 dsr;
+	u16 scce;
+	u8 res2[2];
+	u16 sccm;
+	u8 res3;
+	u8 sccs;
+	u8 res4[8];
+};
+
+struct cpm_smc {
+	u8 res1[2];
+	u16 smcmr;
+	u8 res2[2];
+	u8 smce;
+	u8 res3[3];
+	u8 smcm;
+	u8 res4[5];
+};
+
+struct cpm_param {
+	u16 rbase;
+	u16 tbase;
+	u8 rfcr;
+	u8 tfcr;
+	u16 mrblr;
+	u32 rstate;
+	u8 res1[4];
+	u16 rbptr;
+	u8 res2[6];
+	u32 tstate;
+	u8 res3[4];
+	u16 tbptr;
+	u8 res4[6];
+	u16 maxidl;
+	u16 idlc;
+	u16 brkln;
+	u16 brkec;
+	u16 brkcr;
+	u16 rmask;
+	u8 res5[4];
+};
+
+struct cpm_bd {
+	u16 sc;   /* Status and Control */
+	u16 len;  /* Data length in buffer */
+	u8 *addr; /* Buffer address in host memory */
+};
+
+static void *cpcr;
+static struct cpm_param *param;
+static struct cpm_smc *smc;
+static struct cpm_scc *scc;
+static struct cpm_bd *tbdf, *rbdf;
+static u32 cpm_cmd;
+static void *cbd_addr;
+static u32 cbd_offset;
+
+static void (*do_cmd)(int op);
+static void (*enable_port)(void);
+static void (*disable_port)(void);
+
+#define CPM_CMD_STOP_TX     4
+#define CPM_CMD_RESTART_TX  6
+#define CPM_CMD_INIT_RX_TX  0
+
+static void cpm1_cmd(int op)
+{
+	while (in_be16(cpcr) & 1)
+		;
+
+	out_be16(cpcr, (op << 8) | cpm_cmd | 1);
+
+	while (in_be16(cpcr) & 1)
+		;
+}
+
+static void cpm2_cmd(int op)
+{
+	while (in_be32(cpcr) & 0x10000)
+		;
+
+	out_be32(cpcr, op | cpm_cmd | 0x10000);
+
+	while (in_be32(cpcr) & 0x10000)
+		;
+}
+
+static void smc_disable_port(void)
+{
+	do_cmd(CPM_CMD_STOP_TX);
+	out_be16(&smc->smcmr, in_be16(&smc->smcmr) & ~3);
+}
+
+static void scc_disable_port(void)
+{
+	do_cmd(CPM_CMD_STOP_TX);
+	out_be32(&scc->gsmrl, in_be32(&scc->gsmrl) & ~0x30);
+}
+
+static void smc_enable_port(void)
+{
+	out_be16(&smc->smcmr, in_be16(&smc->smcmr) | 3);
+	do_cmd(CPM_CMD_RESTART_TX);
+}
+
+static void scc_enable_port(void)
+{
+	out_be32(&scc->gsmrl, in_be32(&scc->gsmrl) | 0x30);
+	do_cmd(CPM_CMD_RESTART_TX);
+}
+
+static int cpm_serial_open(void)
+{
+	disable_port();
+
+	out_8(&param->rfcr, 0x10);
+	out_8(&param->tfcr, 0x10);
+	out_be16(&param->mrblr, 1);
+	out_be16(&param->maxidl, 0);
+	out_be16(&param->brkec, 0);
+	out_be16(&param->brkln, 0);
+	out_be16(&param->brkcr, 0);
+
+	rbdf = cbd_addr;
+	rbdf->addr = (u8 *)rbdf - 1;
+	rbdf->sc = 0xa000;
+	rbdf->len = 1;
+
+	tbdf = rbdf + 1;
+	tbdf->addr = (u8 *)rbdf - 2;
+	tbdf->sc = 0x2000;
+	tbdf->len = 1;
+
+	sync();
+	out_be16(&param->rbase, cbd_offset);
+	out_be16(&param->tbase, cbd_offset + sizeof(struct cpm_bd));
+
+	do_cmd(CPM_CMD_INIT_RX_TX);
+
+	enable_port();
+	return 0;
+}
+
+static void cpm_serial_putc(unsigned char c)
+{
+	while (tbdf->sc & 0x8000)
+		barrier();
+
+	sync();
+
+	tbdf->addr[0] = c;
+	eieio();
+	tbdf->sc |= 0x8000;
+}
+
+static unsigned char cpm_serial_tstc(void)
+{
+	barrier();
+	return !(rbdf->sc & 0x8000);
+}
+
+static unsigned char cpm_serial_getc(void)
+{
+	unsigned char c;
+
+	while (!cpm_serial_tstc())
+		;
+
+	sync();
+	c = rbdf->addr[0];
+	eieio();
+	rbdf->sc |= 0x8000;
+
+	return c;
+}
+
+int cpm_console_init(void *devp, struct serial_console_data *scdp)
+{
+	void *vreg[2];
+	u32 reg[2];
+	int is_smc = 0, is_cpm2 = 0;
+	void *parent, *muram;
+	void *muram_addr;
+	unsigned long muram_offset, muram_size;
+
+	if (dt_is_compatible(devp, "fsl,cpm1-smc-uart")) {
+		is_smc = 1;
+	} else if (dt_is_compatible(devp, "fsl,cpm2-scc-uart")) {
+		is_cpm2 = 1;
+	} else if (dt_is_compatible(devp, "fsl,cpm2-smc-uart")) {
+		is_cpm2 = 1;
+		is_smc = 1;
+	}
+
+	if (is_smc) {
+		enable_port = smc_enable_port;
+		disable_port = smc_disable_port;
+	} else {
+		enable_port = scc_enable_port;
+		disable_port = scc_disable_port;
+	}
+
+	if (is_cpm2)
+		do_cmd = cpm2_cmd;
+	else
+		do_cmd = cpm1_cmd;
+
+	if (getprop(devp, "fsl,cpm-command", &cpm_cmd, 4) < 4)
+		return -1;
+
+	if (dt_get_virtual_reg(devp, vreg, 2) < 2)
+		return -1;
+
+	if (is_smc)
+		smc = vreg[0];
+	else
+		scc = vreg[0];
+
+	param = vreg[1];
+
+	parent = get_parent(devp);
+	if (!parent)
+		return -1;
+
+	if (dt_get_virtual_reg(parent, &cpcr, 1) < 1)
+		return -1;
+
+	muram = finddevice("/soc/cpm/muram/data");
+	if (!muram)
+		return -1;
+
+	/* For bootwrapper-compatible device trees, we assume that the first
+	 * entry has at least 128 bytes, and that #address-cells/#data-cells
+	 * is one for both parent and child.
+	 */
+
+	if (dt_get_virtual_reg(muram, &muram_addr, 1) < 1)
+		return -1;
+
+	if (getprop(muram, "reg", reg, 8) < 8)
+		return -1;
+
+	muram_offset = reg[0];
+	muram_size = reg[1];
+
+	/* Store the buffer descriptors at the end of the first muram chunk.
+	 * For SMC ports on CPM2-based platforms, relocate the parameter RAM
+	 * just before the buffer descriptors.
+	 */
+
+	cbd_offset = muram_offset + muram_size - 2 * sizeof(struct cpm_bd);
+
+	if (is_cpm2 && is_smc) {
+		u16 *smc_base = (u16 *)param;
+		u16 pram_offset;
+
+		pram_offset = cbd_offset - 64;
+		pram_offset = _ALIGN_DOWN(pram_offset, 64);
+
+		disable_port();
+		out_be16(smc_base, pram_offset);
+		param = muram_addr - muram_offset + pram_offset;
+	}
+
+	cbd_addr = muram_addr - muram_offset + cbd_offset;
+
+	scdp->open = cpm_serial_open;
+	scdp->putc = cpm_serial_putc;
+	scdp->getc = cpm_serial_getc;
+	scdp->tstc = cpm_serial_tstc;
+
+	return 0;
+}