Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 171 insertions, 0 deletions

diff --git a/arch/powerpc/boot/cuboot-acadia.c b/arch/powerpc/boot/cuboot-acadia.c
new file mode 100644
index 000000000..46e96756c
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-acadia.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Old U-boot compatibility for Acadia
+ *
+ * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Copyright 2008 IBM Corporation
+ */
+
+#include "ops.h"
+#include "io.h"
+#include "dcr.h"
+#include "stdio.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#include "ppcboot.h"
+
+static bd_t bd;
+
+#define CPR_PERD0_SPIDV_MASK   0x000F0000     /* SPI Clock Divider */
+
+#define PLLC_SRC_MASK	       0x20000000     /* PLL feedback source */
+
+#define PLLD_FBDV_MASK	       0x1F000000     /* PLL feedback divider value */
+#define PLLD_FWDVA_MASK        0x000F0000     /* PLL forward divider A value */
+#define PLLD_FWDVB_MASK        0x00000700     /* PLL forward divider B value */
+
+#define PRIMAD_CPUDV_MASK      0x0F000000     /* CPU Clock Divisor Mask */
+#define PRIMAD_PLBDV_MASK      0x000F0000     /* PLB Clock Divisor Mask */
+#define PRIMAD_OPBDV_MASK      0x00000F00     /* OPB Clock Divisor Mask */
+#define PRIMAD_EBCDV_MASK      0x0000000F     /* EBC Clock Divisor Mask */
+
+#define PERD0_PWMDV_MASK       0xFF000000     /* PWM Divider Mask */
+#define PERD0_SPIDV_MASK       0x000F0000     /* SPI Divider Mask */
+#define PERD0_U0DV_MASK        0x0000FF00     /* UART 0 Divider Mask */
+#define PERD0_U1DV_MASK        0x000000FF     /* UART 1 Divider Mask */
+
+static void get_clocks(void)
+{
+	unsigned long sysclk, cpr_plld, cpr_pllc, cpr_primad, plloutb, i;
+	unsigned long pllFwdDiv, pllFwdDivB, pllFbkDiv, pllPlbDiv, pllExtBusDiv;
+	unsigned long pllOpbDiv, freqEBC, freqUART, freqOPB;
+	unsigned long div;		/* total divisor udiv * bdiv */
+	unsigned long umin;		/* minimum udiv	*/
+	unsigned short diff;		/* smallest diff */
+	unsigned long udiv;		/* best udiv */
+	unsigned short idiff;		/* current diff */
+	unsigned short ibdiv;		/* current bdiv */
+	unsigned long est;		/* current estimate */
+	unsigned long baud;
+	void *np;
+
+	/* read the sysclk value from the CPLD */
+	sysclk = (in_8((unsigned char *)0x80000000) == 0xc) ? 66666666 : 33333000;
+
+	/*
+	 * Read PLL Mode registers
+	 */
+	cpr_plld = CPR0_READ(DCRN_CPR0_PLLD);
+	cpr_pllc = CPR0_READ(DCRN_CPR0_PLLC);
+
+	/*
+	 * Determine forward divider A
+	 */
+	pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
+
+	/*
+	 * Determine forward divider B
+	 */
+	pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
+	if (pllFwdDivB == 0)
+		pllFwdDivB = 8;
+
+	/*
+	 * Determine FBK_DIV.
+	 */
+	pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
+	if (pllFbkDiv == 0)
+		pllFbkDiv = 256;
+
+	/*
+	 * Read CPR_PRIMAD register
+	 */
+	cpr_primad = CPR0_READ(DCRN_CPR0_PRIMAD);
+
+	/*
+	 * Determine PLB_DIV.
+	 */
+	pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
+	if (pllPlbDiv == 0)
+		pllPlbDiv = 16;
+
+	/*
+	 * Determine EXTBUS_DIV.
+	 */
+	pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
+	if (pllExtBusDiv == 0)
+		pllExtBusDiv = 16;
+
+	/*
+	 * Determine OPB_DIV.
+	 */
+	pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
+	if (pllOpbDiv == 0)
+		pllOpbDiv = 16;
+
+	/* There is a bug in U-Boot that prevents us from using
+	 * bd.bi_opbfreq because U-Boot doesn't populate it for
+	 * 405EZ.  We get to calculate it, yay!
+	 */
+	freqOPB = (sysclk *pllFbkDiv) /pllOpbDiv;
+
+	freqEBC = (sysclk * pllFbkDiv) / pllExtBusDiv;
+
+	plloutb = ((sysclk * ((cpr_pllc & PLLC_SRC_MASK) ?
+					   pllFwdDivB : pllFwdDiv) *
+		    pllFbkDiv) / pllFwdDivB);
+
+	np = find_node_by_alias("serial0");
+	if (getprop(np, "current-speed", &baud, sizeof(baud)) != sizeof(baud))
+		fatal("no current-speed property\n\r");
+
+	udiv = 256;			/* Assume lowest possible serial clk */
+	div = plloutb / (16 * baud); /* total divisor */
+	umin = (plloutb / freqOPB) << 1;	/* 2 x OPB divisor */
+	diff = 256;			/* highest possible */
+
+	/* i is the test udiv value -- start with the largest
+	 * possible (256) to minimize serial clock and constrain
+	 * search to umin.
+	 */
+	for (i = 256; i > umin; i--) {
+		ibdiv = div / i;
+		est = i * ibdiv;
+		idiff = (est > div) ? (est-div) : (div-est);
+		if (idiff == 0) {
+			udiv = i;
+			break;      /* can't do better */
+		} else if (idiff < diff) {
+			udiv = i;       /* best so far */
+			diff = idiff;   /* update lowest diff*/
+		}
+	}
+	freqUART = plloutb / udiv;
+
+	dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_intfreq, bd.bi_plb_busfreq);
+	dt_fixup_clock("/plb/ebc", freqEBC);
+	dt_fixup_clock("/plb/opb", freqOPB);
+	dt_fixup_clock("/plb/opb/serial@ef600300", freqUART);
+	dt_fixup_clock("/plb/opb/serial@ef600400", freqUART);
+}
+
+static void acadia_fixups(void)
+{
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+	get_clocks();
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+}
+	
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = acadia_fixups;
+	platform_ops.exit = ibm40x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}