Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 613 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/fsp2.dts b/arch/powerpc/boot/dts/fsp2.dts
new file mode 100644
index 000000000..9311b86b1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsp2.dts
@@ -0,0 +1,613 @@
+/*
+ * Device Tree Source for FSP2
+ *
+ * Copyright 2010,2012 IBM Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "ibm,fsp2";
+	compatible = "ibm,fsp2";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC, 476FSP2";
+			reg = <0x0>;
+			clock-frequency = <0>;    /* Filled in by cuboot */
+			timebase-frequency = <0>; /* Filled in by cuboot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by
+							     cuboot */
+	};
+
+	clocks {
+		mmc_clk: mmc_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+			clock-output-names = "mmc_clk";
+		};
+	};
+
+	UIC0: uic0 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x2c0 0x8>;
+	};
+
+	/* "interrupts" field is <bit level bit level>
+	   first pair is non-critical, second is critical */
+	UIC1_0: uic1_0 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x2c8 0x8>;
+		interrupt-parent = <&UIC0>;
+		interrupts = <21 0x4 4 0x84>;
+	};
+
+	/* PSI and DMA */
+	UIC1_1: uic1_1 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x350 0x8>;
+		interrupt-parent = <&UIC0>;
+		interrupts = <22 0x4 5 0x84>;
+	};
+
+	/* Ethernet and USB */
+	UIC1_2: uic1_2 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x358 0x8>;
+		interrupt-parent = <&UIC0>;
+		interrupts = <23 0x4 6 0x84>;
+	};
+
+	/* PLB Errors */
+	UIC1_3: uic1_3 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <4>;
+		dcr-reg = <0x360 0x8>;
+		interrupt-parent = <&UIC0>;
+		interrupts = <24 0x4 7 0x84>;
+	};
+
+	UIC1_4: uic1_4 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <5>;
+		dcr-reg = <0x368 0x8>;
+		interrupt-parent = <&UIC0>;
+		interrupts = <25 0x4 8 0x84>;
+	};
+
+	UIC1_5: uic1_5 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <6>;
+		dcr-reg = <0x370 0x8>;
+		interrupt-parent = <&UIC0>;
+		interrupts = <26 0x4 9 0x84>;
+	};
+
+	/* 2nd level UICs for FSI */
+	UIC2_0: uic2_0 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <7>;
+		dcr-reg = <0x2d0 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <16 0x4 0 0x84>;
+	};
+
+	UIC2_1: uic2_1 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <8>;
+		dcr-reg = <0x2d8 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <17 0x4 1 0x84>;
+	};
+
+	UIC2_2: uic2_2 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <9>;
+		dcr-reg = <0x2e0 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <18 0x4 2 0x84>;
+	};
+
+	UIC2_3: uic2_3 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <10>;
+		dcr-reg = <0x2e8 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <19 0x4 3 0x84>;
+	};
+
+	UIC2_4: uic2_4 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <11>;
+		dcr-reg = <0x2f0 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <20 0x4 4 0x84>;
+	};
+
+	UIC2_5: uic2_5 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <12>;
+		dcr-reg = <0x2f8 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <21 0x4 5 0x84>;
+	};
+
+	UIC2_6: uic2_6 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <13>;
+		dcr-reg = <0x300 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <22 0x4 6 0x84>;
+	};
+
+	UIC2_7: uic2_7 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <14>;
+		dcr-reg = <0x308 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <23 0x4 7 0x84>;
+	};
+
+	UIC2_8: uic2_8 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <15>;
+		dcr-reg = <0x310 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <24 0x4 8 0x84>;
+	};
+
+	UIC2_9: uic2_9 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <16>;
+		dcr-reg = <0x318 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <25 0x4 9 0x84>;
+	};
+
+	UIC2_10: uic2_10 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <17>;
+		dcr-reg = <0x320 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <26 0x4 10 0x84>;
+	};
+
+	UIC2_11: uic2_11 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <18>;
+		dcr-reg = <0x328 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <27 0x4 11 0x84>;
+	};
+
+	UIC2_12: uic2_12 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <19>;
+		dcr-reg = <0x330 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <28 0x4 12 0x84>;
+	};
+
+	UIC2_13: uic2_13 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <20>;
+		dcr-reg = <0x338 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <29 0x4 13 0x84>;
+	};
+
+	UIC2_14: uic2_14 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <21>;
+		dcr-reg = <0x340 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <30 0x4 14 0x84>;
+	};
+
+	UIC2_15: uic2_15 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <22>;
+		dcr-reg = <0x348 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <31 0x4 15 0x84>;
+	};
+
+	plb6 {
+		compatible = "ibm,plb6";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		MCW0: memory-controller-wrapper {
+			compatible = "ibm,cw-476fsp2";
+			dcr-reg = <0x11111800 0x40>;
+		};
+
+		MCIF0: memory-controller {
+			compatible = "ibm,sdram-476fsp2", "ibm,sdram-4xx-ddr3";
+			dcr-reg = <0x11120000 0x10000>;
+			mcer-device = <&MCW0>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <10 0x84   /* ECC UE */
+				      11 0x84>; /* ECC CE */
+		};
+	};
+
+	plb4 {
+		compatible = "ibm,plb4";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000010 0x00000000 0x80000000
+			  0x80000000 0x00000010 0x80000000 0x80000000>;
+		clock-frequency = <333333334>;
+
+		plb6-system-hung-irq {
+			compatible = "ibm,bus-error-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0 0x84>;
+		};
+
+		l2-error-irq {
+			compatible = "ibm,bus-error-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <20 0x84>;
+		};
+
+		plb6-plb4-irq {
+			compatible = "ibm,bus-error-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <1 0x84>;
+		};
+
+		plb4-ahb-irq {
+			compatible = "ibm,bus-error-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC1_3>;
+			interrupts = <20 0x84>;
+		};
+
+		opbd-error-irq {
+			compatible = "ibm,opbd-error-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC1_4>;
+			interrupts = <5 0x84>;
+		};
+
+		cmu-error-irq {
+			compatible = "ibm,cmu-error-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <28 0x84>;
+		};
+
+		conf-error-irq {
+			compatible = "ibm,conf-error-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC1_4>;
+			interrupts = <11 0x84>;
+		};
+
+		mc-ue-irq {
+			compatible = "ibm,mc-ue-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <10 0x84>;
+		};
+
+		reset-warning-irq {
+			compatible = "ibm,reset-warning-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <17 0x84>;
+		};
+
+		MAL0: mcmal0 {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			compatible = "ibm,mcmal";
+			dcr-reg = <0x80 0x80>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0 1 2 3 4>;
+			/* index interrupt-parent interrupt# type */
+			interrupt-map = </*TXEOB*/ 0 &UIC1_2 4 0x4
+					 /*RXEOB*/ 1 &UIC1_2 3 0x4
+					 /*SERR*/  2 &UIC1_2 7 0x4
+					 /*TXDE*/  3 &UIC1_2 6 0x4
+					 /*RXDE*/  4 &UIC1_2 5 0x4>;
+		};
+
+		MAL1: mcmal1 {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			compatible = "ibm,mcmal";
+			dcr-reg = <0x100 0x80>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&MAL1>;
+			interrupts = <0 1 2 3 4>;
+			/* index interrupt-parent interrupt# type */
+			interrupt-map = </*TXEOB*/ 0 &UIC1_2 12 0x4
+					 /*RXEOB*/ 1 &UIC1_2 11 0x4
+					 /*SERR*/  2 &UIC1_2 15 0x4
+					 /*TXDE*/  3 &UIC1_2 14 0x4
+					 /*RXDE*/  4 &UIC1_2 13 0x4>;
+		};
+
+		mmc0: mmc@20c0000 {
+			compatible	= "st,sdhci-stih407", "st,sdhci";
+			reg		= <0x020c0000 0x20000>;
+			reg-names	= "mmc";
+			interrupts	= <21 0x4>;
+			interrupt-parent = <&UIC1_3>;
+			interrupt-names	= "mmcirq";
+			pinctrl-names	= "default";
+			pinctrl-0	= <>;
+			clock-names	= "mmc";
+			clocks		= <&mmc_clk>;
+			bus-width	= <4>;
+			non-removable;
+			sd-uhs-sdr50;
+			sd-uhs-sdr104;
+			sd-uhs-ddr50;
+		};
+
+		opb {
+			compatible = "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges; // pass-thru to parent bus
+			clock-frequency = <83333334>;
+
+			EMAC0: ethernet@b0000000 {
+				linux,network-index = <0>;
+				device_type = "network";
+				compatible = "ibm,emac4sync";
+				has-inverted-stacr-oc;
+				interrupt-parent = <&UIC1_2>;
+				interrupts = <1 0x4 0 0x4>;
+				reg = <0xb0000000 0x100>;
+				local-mac-address = [000000000000]; /* Filled in by
+							       cuboot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <4096>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <8192>;
+				phy-address = <1>;
+				phy-mode = "rgmii";
+				phy-map = <00000003>;
+				rgmii-device = <&RGMII>;
+				rgmii-channel = <0>;
+			};
+
+			EMAC1: ethernet@b0000100 {
+				linux,network-index = <1>;
+				device_type = "network";
+				compatible = "ibm,emac4sync";
+				has-inverted-stacr-oc;
+				interrupt-parent = <&UIC1_2>;
+				interrupts = <9 0x4 8 0x4>;
+				reg = <0xb0000100 0x100>;
+				local-mac-address = [000000000000]; /* Filled in by
+							       cuboot */
+				mal-device = <&MAL1>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <1>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <4096>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <8192>;
+				phy-address = <2>;
+				phy-mode = "rgmii";
+				phy-map = <00000003>;
+				rgmii-device = <&RGMII>;
+				rgmii-channel = <1>;
+			};
+
+			RGMII: rgmii@b0000600 {
+				compatible = "ibm,rgmii";
+				has-mdio;
+				reg = <0xb0000600 0x8>;
+			};
+
+			UART0: serial@b0020000 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xb0020000 0x8>;
+				virtual-reg = <0xb0020000>;
+				clock-frequency = <20833333>;
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <31 0x4>;
+			};
+		};
+
+		OHCI1: ohci@2040000 {
+			compatible = "ohci-le";
+			reg = <0x02040000 0xa0>;
+			interrupt-parent = <&UIC1_3>;
+			interrupts = <28 0x8 29 0x8>;
+		};
+
+		OHCI2: ohci@2080000 {
+			compatible = "ohci-le";
+			reg = <0x02080000 0xa0>;
+			interrupt-parent = <&UIC1_3>;
+			interrupts = <30 0x8 31 0x8>;
+		};
+
+		EHCI: ehci@2000000 {
+			compatible = "usb-ehci";
+			reg = <0x02000000 0xa4>;
+			interrupt-parent = <&UIC1_3>;
+			interrupts = <23 0x4>;
+		};
+
+	};
+
+	chosen {
+		stdout-path = "/plb/opb/serial@b0020000";
+		bootargs = "console=ttyS0,115200 rw log_buf_len=32768 debug";
+	};
+};