Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 293 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts
new file mode 100644
index 000000000..0bd2acc04
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc5125twr.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * STx/Freescale ADS5125 MPC5125 silicon
+ *
+ * Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved.
+ *
+ * Reworked by Matteo Facchinetti (engineering@sirius-es.it)
+ * Copyright (C) 2013 Sirius Electronic Systems
+ */
+
+#include <dt-bindings/clock/mpc512x-clock.h>
+
+/dts-v1/;
+
+/ {
+	model = "mpc5125twr"; // In BSP "mpc5125ads"
+	compatible = "fsl,mpc5125ads", "fsl,mpc5125";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&ipic>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		ethernet0 = &eth0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5125@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <0x20>;	// 32 bytes
+			i-cache-line-size = <0x20>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
+			bus-frequency = <198000000>;	// 198 MHz csb bus
+			clock-frequency = <396000000>;	// 396 MHz ppc core
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	// 256MB at 0
+	};
+
+	sram@30000000 {
+		compatible = "fsl,mpc5121-sram";
+		reg = <0x30000000 0x08000>;		// 32K at 0x30000000
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <33000000>;
+		};
+	};
+
+	soc@80000000 {
+		compatible = "fsl,mpc5121-immr";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x80000000 0x400000>;
+		reg = <0x80000000 0x400000>;
+		bus-frequency = <66000000>;	// 66 MHz ips bus
+
+		// IPIC
+		// interrupts cell = <intr #, sense>
+		// sense values match linux IORESOURCE_IRQ_* defines:
+		// sense == 8: Level, low assertion
+		// sense == 2: Edge, high-to-low change
+		//
+		ipic: interrupt-controller@c00 {
+			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0xc00 0x100>;
+		};
+
+		rtc@a00 {	// Real time clock
+			compatible = "fsl,mpc5121-rtc";
+			reg = <0xa00 0x100>;
+			interrupts = <79 0x8 80 0x8>;
+		};
+
+		reset@e00 {	// Reset module
+			compatible = "fsl,mpc5125-reset";
+			reg = <0xe00 0x100>;
+		};
+
+		clks: clock@f00 {	// Clock control
+			compatible = "fsl,mpc5121-clock";
+			reg = <0xf00 0x100>;
+			#clock-cells = <1>;
+			clocks = <&osc>;
+			clock-names = "osc";
+		};
+
+		pmc@1000{  // Power Management Controller
+			compatible = "fsl,mpc5121-pmc";
+			reg = <0x1000 0x100>;
+			interrupts = <83 0x2>;
+		};
+
+		gpio0: gpio@1100 {
+			compatible = "fsl,mpc5125-gpio";
+			reg = <0x1100 0x080>;
+			interrupts = <78 0x8>;
+		};
+
+		gpio1: gpio@1180 {
+			compatible = "fsl,mpc5125-gpio";
+			reg = <0x1180 0x080>;
+			interrupts = <86 0x8>;
+		};
+
+		can@1300 { // CAN rev.2
+			compatible = "fsl,mpc5121-mscan";
+			interrupts = <12 0x8>;
+			reg = <0x1300 0x80>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN0_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
+		};
+
+		can@1380 {
+			compatible = "fsl,mpc5121-mscan";
+			interrupts = <13 0x8>;
+			reg = <0x1380 0x80>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN1_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
+		};
+
+		sdhc@1500 {
+			compatible = "fsl,mpc5121-sdhc";
+			interrupts = <8 0x8>;
+			reg = <0x1500 0x100>;
+			clocks = <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SDHC>;
+			clock-names = "ipg", "per";
+		};
+
+		i2c@1700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1700 0x20>;
+			interrupts = <0x9 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
+		};
+
+		i2c@1720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1720 0x20>;
+			interrupts = <0xa 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
+		};
+
+		i2c@1740 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1740 0x20>;
+			interrupts = <0xb 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
+		};
+
+		i2ccontrol@1760 {
+			compatible = "fsl,mpc5121-i2c-ctrl";
+			reg = <0x1760 0x8>;
+		};
+
+		diu@2100 {
+			compatible = "fsl,mpc5121-diu";
+			reg = <0x2100 0x100>;
+			interrupts = <64 0x8>;
+			clocks = <&clks MPC512x_CLK_DIU>;
+			clock-names = "ipg";
+		};
+
+		mdio@2800 {
+			compatible = "fsl,mpc5121-fec-mdio";
+			reg = <0x2800 0x800>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy0: ethernet-phy@0 {
+				reg = <1>;
+			};
+		};
+
+		eth0: ethernet@2800 {
+			compatible = "fsl,mpc5125-fec";
+			reg = <0x2800 0x800>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <4 0x8>;
+			phy-handle = < &phy0 >;
+			phy-connection-type = "rmii";
+			clocks = <&clks MPC512x_CLK_FEC>;
+			clock-names = "per";
+		};
+
+		// IO control
+		ioctl@a000 {
+			compatible = "fsl,mpc5125-ioctl";
+			reg = <0xA000 0x1000>;
+		};
+
+		// disable USB1 port
+		// TODO:
+		// correct pinmux config and fix USB3320 ulpi dependency
+		// before re-enabling it
+		usb@3000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x3000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <43 0x8>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+			clocks = <&clks MPC512x_CLK_USB1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		sclpc@10100 {
+			compatible = "fsl,mpc512x-lpbfifo";
+			reg = <0x10100 0x50>;
+			interrupts = <7 0x8>;
+			dmas = <&dma0 26>;
+			dma-names = "rx-tx";
+		};
+
+		// 5125 PSCs are not 52xx or 5121 PSC compatible
+		// PSC1 uart0 aka ttyPSC0
+		serial@11100 {
+			compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
+			reg = <0x11100 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC1>,
+				 <&clks MPC512x_CLK_PSC1_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		// PSC9 uart1 aka ttyPSC1
+		serial@11900 {
+			compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
+			reg = <0x11900 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC9>,
+				 <&clks MPC512x_CLK_PSC9_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		pscfifo@11f00 {
+			compatible = "fsl,mpc5121-psc-fifo";
+			reg = <0x11f00 0x100>;
+			interrupts = <40 0x8>;
+			clocks = <&clks MPC512x_CLK_PSC_FIFO>;
+			clock-names = "ipg";
+		};
+
+		dma0: dma@14000 {
+			compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2"
+			reg = <0x14000 0x1800>;
+			interrupts = <65 0x8>;
+			#dma-cells = <1>;
+		};
+	};
+};