Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 236 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/book3s/32/mmu-hash.h b/arch/powerpc/include/asm/book3s/32/mmu-hash.h
new file mode 100644
index 000000000..78c6a5fde
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/32/mmu-hash.h
@@ -0,0 +1,236 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_BOOK3S_32_MMU_HASH_H_
+#define _ASM_POWERPC_BOOK3S_32_MMU_HASH_H_
+
+/*
+ * 32-bit hash table MMU support
+ */
+
+/*
+ * BATs
+ */
+
+/* Block size masks */
+#define BL_128K	0x000
+#define BL_256K 0x001
+#define BL_512K 0x003
+#define BL_1M   0x007
+#define BL_2M   0x00F
+#define BL_4M   0x01F
+#define BL_8M   0x03F
+#define BL_16M  0x07F
+#define BL_32M  0x0FF
+#define BL_64M  0x1FF
+#define BL_128M 0x3FF
+#define BL_256M 0x7FF
+
+/* BAT Access Protection */
+#define BPP_XX	0x00		/* No access */
+#define BPP_RX	0x01		/* Read only */
+#define BPP_RW	0x02		/* Read/write */
+
+#ifndef __ASSEMBLY__
+/* Contort a phys_addr_t into the right format/bits for a BAT */
+#ifdef CONFIG_PHYS_64BIT
+#define BAT_PHYS_ADDR(x) ((u32)((x & 0x00000000fffe0000ULL) | \
+				((x & 0x0000000e00000000ULL) >> 24) | \
+				((x & 0x0000000100000000ULL) >> 30)))
+#define PHYS_BAT_ADDR(x) (((u64)(x) & 0x00000000fffe0000ULL) | \
+			  (((u64)(x) << 24) & 0x0000000e00000000ULL) | \
+			  (((u64)(x) << 30) & 0x0000000100000000ULL))
+#else
+#define BAT_PHYS_ADDR(x) (x)
+#define PHYS_BAT_ADDR(x) ((x) & 0xfffe0000)
+#endif
+
+struct ppc_bat {
+	u32 batu;
+	u32 batl;
+};
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Hash table
+ */
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+#define PP_RWXX	0	/* Supervisor read/write, User none */
+#define PP_RWRX 1	/* Supervisor read/write, User read */
+#define PP_RWRW 2	/* Supervisor read/write, User read/write */
+#define PP_RXRX 3	/* Supervisor read,       User read */
+
+/* Values for Segment Registers */
+#define SR_NX	0x10000000	/* No Execute */
+#define SR_KP	0x20000000	/* User key */
+#define SR_KS	0x40000000	/* Supervisor key */
+
+#ifdef __ASSEMBLY__
+
+#include <asm/asm-offsets.h>
+
+.macro uus_addi sr reg1 reg2 imm
+	.if NUM_USER_SEGMENTS > \sr
+	addi	\reg1,\reg2,\imm
+	.endif
+.endm
+
+.macro uus_mtsr sr reg1
+	.if NUM_USER_SEGMENTS > \sr
+	mtsr	\sr, \reg1
+	.endif
+.endm
+
+/*
+ * This isync() shouldn't be necessary as the kernel is not excepted to run
+ * any instruction in userspace soon after the update of segments and 'rfi'
+ * instruction is used to return to userspace, but hash based cores
+ * (at least G3) seem to exhibit a random behaviour when the 'isync' is not
+ * there. 603 cores don't have this behaviour so don't do the 'isync' as it
+ * saves several CPU cycles.
+ */
+.macro uus_isync
+#ifdef CONFIG_PPC_BOOK3S_604
+BEGIN_MMU_FTR_SECTION
+	isync
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE)
+#endif
+.endm
+
+.macro update_user_segments_by_4 tmp1 tmp2 tmp3 tmp4
+	uus_addi	1, \tmp2, \tmp1, 0x111
+	uus_addi	2, \tmp3, \tmp1, 0x222
+	uus_addi	3, \tmp4, \tmp1, 0x333
+
+	uus_mtsr	0, \tmp1
+	uus_mtsr	1, \tmp2
+	uus_mtsr	2, \tmp3
+	uus_mtsr	3, \tmp4
+
+	uus_addi	4, \tmp1, \tmp1, 0x444
+	uus_addi	5, \tmp2, \tmp2, 0x444
+	uus_addi	6, \tmp3, \tmp3, 0x444
+	uus_addi	7, \tmp4, \tmp4, 0x444
+
+	uus_mtsr	4, \tmp1
+	uus_mtsr	5, \tmp2
+	uus_mtsr	6, \tmp3
+	uus_mtsr	7, \tmp4
+
+	uus_addi	8, \tmp1, \tmp1, 0x444
+	uus_addi	9, \tmp2, \tmp2, 0x444
+	uus_addi	10, \tmp3, \tmp3, 0x444
+	uus_addi	11, \tmp4, \tmp4, 0x444
+
+	uus_mtsr	8, \tmp1
+	uus_mtsr	9, \tmp2
+	uus_mtsr	10, \tmp3
+	uus_mtsr	11, \tmp4
+
+	uus_addi	12, \tmp1, \tmp1, 0x444
+	uus_addi	13, \tmp2, \tmp2, 0x444
+	uus_addi	14, \tmp3, \tmp3, 0x444
+	uus_addi	15, \tmp4, \tmp4, 0x444
+
+	uus_mtsr	12, \tmp1
+	uus_mtsr	13, \tmp2
+	uus_mtsr	14, \tmp3
+	uus_mtsr	15, \tmp4
+
+	uus_isync
+.endm
+
+#else
+
+/*
+ * This macro defines the mapping from contexts to VSIDs (virtual
+ * segment IDs).  We use a skew on both the context and the high 4 bits
+ * of the 32-bit virtual address (the "effective segment ID") in order
+ * to spread out the entries in the MMU hash table.  Note, if this
+ * function is changed then hash functions will have to be
+ * changed to correspond.
+ */
+#define CTX_TO_VSID(c, id)	((((c) * (897 * 16)) + (id * 0x111)) & 0xffffff)
+
+/*
+ * Hardware Page Table Entry
+ * Note that the xpn and x bitfields are used only by processors that
+ * support extended addressing; otherwise, those bits are reserved.
+ */
+struct hash_pte {
+	unsigned long v:1;	/* Entry is valid */
+	unsigned long vsid:24;	/* Virtual segment identifier */
+	unsigned long h:1;	/* Hash algorithm indicator */
+	unsigned long api:6;	/* Abbreviated page index */
+	unsigned long rpn:20;	/* Real (physical) page number */
+	unsigned long xpn:3;	/* Real page number bits 0-2, optional */
+	unsigned long r:1;	/* Referenced */
+	unsigned long c:1;	/* Changed */
+	unsigned long w:1;	/* Write-thru cache mode */
+	unsigned long i:1;	/* Cache inhibited */
+	unsigned long m:1;	/* Memory coherence */
+	unsigned long g:1;	/* Guarded */
+	unsigned long x:1;	/* Real page number bit 3, optional */
+	unsigned long pp:2;	/* Page protection */
+};
+
+typedef struct {
+	unsigned long id;
+	unsigned long sr0;
+	void __user *vdso;
+} mm_context_t;
+
+#ifdef CONFIG_PPC_KUEP
+#define INIT_MM_CONTEXT(mm) .context.sr0 = SR_NX
+#endif
+
+void update_bats(void);
+static inline void cleanup_cpu_mmu_context(void) { }
+
+/* patch sites */
+extern s32 patch__hash_page_A0, patch__hash_page_A1, patch__hash_page_A2;
+extern s32 patch__hash_page_B, patch__hash_page_C;
+extern s32 patch__flush_hash_A0, patch__flush_hash_A1, patch__flush_hash_A2;
+extern s32 patch__flush_hash_B;
+
+#include <asm/reg.h>
+#include <asm/task_size_32.h>
+
+static __always_inline void update_user_segment(u32 n, u32 val)
+{
+	if (n << 28 < TASK_SIZE)
+		mtsr(val + n * 0x111, n << 28);
+}
+
+static __always_inline void update_user_segments(u32 val)
+{
+	val &= 0xf0ffffff;
+
+	update_user_segment(0, val);
+	update_user_segment(1, val);
+	update_user_segment(2, val);
+	update_user_segment(3, val);
+	update_user_segment(4, val);
+	update_user_segment(5, val);
+	update_user_segment(6, val);
+	update_user_segment(7, val);
+	update_user_segment(8, val);
+	update_user_segment(9, val);
+	update_user_segment(10, val);
+	update_user_segment(11, val);
+	update_user_segment(12, val);
+	update_user_segment(13, val);
+	update_user_segment(14, val);
+	update_user_segment(15, val);
+}
+
+int __init find_free_bat(void);
+unsigned int bat_block_size(unsigned long base, unsigned long top);
+#endif /* !__ASSEMBLY__ */
+
+/* We happily ignore the smaller BATs on 601, we don't actually use
+ * those definitions on hash32 at the moment anyway
+ */
+#define mmu_virtual_psize	MMU_PAGE_4K
+#define mmu_linear_psize	MMU_PAGE_256M
+
+#endif /* _ASM_POWERPC_BOOK3S_32_MMU_HASH_H_ */