Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 427 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/book3s/64/kup.h b/arch/powerpc/include/asm/book3s/64/kup.h
new file mode 100644
index 000000000..54cf46808
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/64/kup.h
@@ -0,0 +1,427 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_BOOK3S_64_KUP_H
+#define _ASM_POWERPC_BOOK3S_64_KUP_H
+
+#include <linux/const.h>
+#include <asm/reg.h>
+
+#define AMR_KUAP_BLOCK_READ	UL(0x5455555555555555)
+#define AMR_KUAP_BLOCK_WRITE	UL(0xa8aaaaaaaaaaaaaa)
+#define AMR_KUEP_BLOCKED	UL(0x5455555555555555)
+#define AMR_KUAP_BLOCKED	(AMR_KUAP_BLOCK_READ | AMR_KUAP_BLOCK_WRITE)
+
+#ifdef __ASSEMBLY__
+
+.macro kuap_user_restore gpr1, gpr2
+#if defined(CONFIG_PPC_PKEY)
+	BEGIN_MMU_FTR_SECTION_NESTED(67)
+	b	100f  // skip_restore_amr
+	END_MMU_FTR_SECTION_NESTED_IFCLR(MMU_FTR_PKEY, 67)
+	/*
+	 * AMR and IAMR are going to be different when
+	 * returning to userspace.
+	 */
+	ld	\gpr1, STACK_REGS_AMR(r1)
+
+	/*
+	 * If kuap feature is not enabled, do the mtspr
+	 * only if AMR value is different.
+	 */
+	BEGIN_MMU_FTR_SECTION_NESTED(68)
+	mfspr	\gpr2, SPRN_AMR
+	cmpd	\gpr1, \gpr2
+	beq	99f
+	END_MMU_FTR_SECTION_NESTED_IFCLR(MMU_FTR_BOOK3S_KUAP, 68)
+
+	isync
+	mtspr	SPRN_AMR, \gpr1
+99:
+	/*
+	 * Restore IAMR only when returning to userspace
+	 */
+	ld	\gpr1, STACK_REGS_IAMR(r1)
+
+	/*
+	 * If kuep feature is not enabled, do the mtspr
+	 * only if IAMR value is different.
+	 */
+	BEGIN_MMU_FTR_SECTION_NESTED(69)
+	mfspr	\gpr2, SPRN_IAMR
+	cmpd	\gpr1, \gpr2
+	beq	100f
+	END_MMU_FTR_SECTION_NESTED_IFCLR(MMU_FTR_BOOK3S_KUEP, 69)
+
+	isync
+	mtspr	SPRN_IAMR, \gpr1
+
+100: //skip_restore_amr
+	/* No isync required, see kuap_user_restore() */
+#endif
+.endm
+
+.macro kuap_kernel_restore gpr1, gpr2
+#if defined(CONFIG_PPC_PKEY)
+
+	BEGIN_MMU_FTR_SECTION_NESTED(67)
+	/*
+	 * AMR is going to be mostly the same since we are
+	 * returning to the kernel. Compare and do a mtspr.
+	 */
+	ld	\gpr2, STACK_REGS_AMR(r1)
+	mfspr	\gpr1, SPRN_AMR
+	cmpd	\gpr1, \gpr2
+	beq	100f
+	isync
+	mtspr	SPRN_AMR, \gpr2
+	/*
+	 * No isync required, see kuap_restore_amr()
+	 * No need to restore IAMR when returning to kernel space.
+	 */
+100:
+	END_MMU_FTR_SECTION_NESTED_IFSET(MMU_FTR_BOOK3S_KUAP, 67)
+#endif
+.endm
+
+#ifdef CONFIG_PPC_KUAP
+.macro kuap_check_amr gpr1, gpr2
+#ifdef CONFIG_PPC_KUAP_DEBUG
+	BEGIN_MMU_FTR_SECTION_NESTED(67)
+	mfspr	\gpr1, SPRN_AMR
+	/* Prevent access to userspace using any key values */
+	LOAD_REG_IMMEDIATE(\gpr2, AMR_KUAP_BLOCKED)
+999:	tdne	\gpr1, \gpr2
+	EMIT_WARN_ENTRY 999b, __FILE__, __LINE__, (BUGFLAG_WARNING | BUGFLAG_ONCE)
+	END_MMU_FTR_SECTION_NESTED_IFSET(MMU_FTR_BOOK3S_KUAP, 67)
+#endif
+.endm
+#endif
+
+/*
+ *	if (pkey) {
+ *
+ *		save AMR -> stack;
+ *		if (kuap) {
+ *			if (AMR != BLOCKED)
+ *				KUAP_BLOCKED -> AMR;
+ *		}
+ *		if (from_user) {
+ *			save IAMR -> stack;
+ *			if (kuep) {
+ *				KUEP_BLOCKED ->IAMR
+ *			}
+ *		}
+ *		return;
+ *	}
+ *
+ *	if (kuap) {
+ *		if (from_kernel) {
+ *			save AMR -> stack;
+ *			if (AMR != BLOCKED)
+ *				KUAP_BLOCKED -> AMR;
+ *		}
+ *
+ *	}
+ */
+.macro kuap_save_amr_and_lock gpr1, gpr2, use_cr, msr_pr_cr
+#if defined(CONFIG_PPC_PKEY)
+
+	/*
+	 * if both pkey and kuap is disabled, nothing to do
+	 */
+	BEGIN_MMU_FTR_SECTION_NESTED(68)
+	b	100f  // skip_save_amr
+	END_MMU_FTR_SECTION_NESTED_IFCLR(MMU_FTR_PKEY | MMU_FTR_BOOK3S_KUAP, 68)
+
+	/*
+	 * if pkey is disabled and we are entering from userspace
+	 * don't do anything.
+	 */
+	BEGIN_MMU_FTR_SECTION_NESTED(67)
+	.ifnb \msr_pr_cr
+	/*
+	 * Without pkey we are not changing AMR outside the kernel
+	 * hence skip this completely.
+	 */
+	bne	\msr_pr_cr, 100f  // from userspace
+	.endif
+        END_MMU_FTR_SECTION_NESTED_IFCLR(MMU_FTR_PKEY, 67)
+
+	/*
+	 * pkey is enabled or pkey is disabled but entering from kernel
+	 */
+	mfspr	\gpr1, SPRN_AMR
+	std	\gpr1, STACK_REGS_AMR(r1)
+
+	/*
+	 * update kernel AMR with AMR_KUAP_BLOCKED only
+	 * if KUAP feature is enabled
+	 */
+	BEGIN_MMU_FTR_SECTION_NESTED(69)
+	LOAD_REG_IMMEDIATE(\gpr2, AMR_KUAP_BLOCKED)
+	cmpd	\use_cr, \gpr1, \gpr2
+	beq	\use_cr, 102f
+	/*
+	 * We don't isync here because we very recently entered via an interrupt
+	 */
+	mtspr	SPRN_AMR, \gpr2
+	isync
+102:
+	END_MMU_FTR_SECTION_NESTED_IFSET(MMU_FTR_BOOK3S_KUAP, 69)
+
+	/*
+	 * if entering from kernel we don't need save IAMR
+	 */
+	.ifnb \msr_pr_cr
+	beq	\msr_pr_cr, 100f // from kernel space
+	mfspr	\gpr1, SPRN_IAMR
+	std	\gpr1, STACK_REGS_IAMR(r1)
+
+	/*
+	 * update kernel IAMR with AMR_KUEP_BLOCKED only
+	 * if KUEP feature is enabled
+	 */
+	BEGIN_MMU_FTR_SECTION_NESTED(70)
+	LOAD_REG_IMMEDIATE(\gpr2, AMR_KUEP_BLOCKED)
+	mtspr	SPRN_IAMR, \gpr2
+	isync
+	END_MMU_FTR_SECTION_NESTED_IFSET(MMU_FTR_BOOK3S_KUEP, 70)
+	.endif
+
+100: // skip_save_amr
+#endif
+.endm
+
+#else /* !__ASSEMBLY__ */
+
+#include <linux/jump_label.h>
+
+DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
+
+#ifdef CONFIG_PPC_PKEY
+
+extern u64 __ro_after_init default_uamor;
+extern u64 __ro_after_init default_amr;
+extern u64 __ro_after_init default_iamr;
+
+#include <asm/mmu.h>
+#include <asm/ptrace.h>
+
+/* usage of kthread_use_mm() should inherit the
+ * AMR value of the operating address space. But, the AMR value is
+ * thread-specific and we inherit the address space and not thread
+ * access restrictions. Because of this ignore AMR value when accessing
+ * userspace via kernel thread.
+ */
+static inline u64 current_thread_amr(void)
+{
+	if (current->thread.regs)
+		return current->thread.regs->amr;
+	return default_amr;
+}
+
+static inline u64 current_thread_iamr(void)
+{
+	if (current->thread.regs)
+		return current->thread.regs->iamr;
+	return default_iamr;
+}
+#endif /* CONFIG_PPC_PKEY */
+
+#ifdef CONFIG_PPC_KUAP
+
+static __always_inline bool kuap_is_disabled(void)
+{
+	return !mmu_has_feature(MMU_FTR_BOOK3S_KUAP);
+}
+
+static inline void kuap_user_restore(struct pt_regs *regs)
+{
+	bool restore_amr = false, restore_iamr = false;
+	unsigned long amr, iamr;
+
+	if (!mmu_has_feature(MMU_FTR_PKEY))
+		return;
+
+	if (!mmu_has_feature(MMU_FTR_BOOK3S_KUAP)) {
+		amr = mfspr(SPRN_AMR);
+		if (amr != regs->amr)
+			restore_amr = true;
+	} else {
+		restore_amr = true;
+	}
+
+	if (!mmu_has_feature(MMU_FTR_BOOK3S_KUEP)) {
+		iamr = mfspr(SPRN_IAMR);
+		if (iamr != regs->iamr)
+			restore_iamr = true;
+	} else {
+		restore_iamr = true;
+	}
+
+
+	if (restore_amr || restore_iamr) {
+		isync();
+		if (restore_amr)
+			mtspr(SPRN_AMR, regs->amr);
+		if (restore_iamr)
+			mtspr(SPRN_IAMR, regs->iamr);
+	}
+	/*
+	 * No isync required here because we are about to rfi
+	 * back to previous context before any user accesses
+	 * would be made, which is a CSI.
+	 */
+}
+
+static inline void __kuap_kernel_restore(struct pt_regs *regs, unsigned long amr)
+{
+	if (likely(regs->amr == amr))
+		return;
+
+	isync();
+	mtspr(SPRN_AMR, regs->amr);
+	/*
+	 * No isync required here because we are about to rfi
+	 * back to previous context before any user accesses
+	 * would be made, which is a CSI.
+	 *
+	 * No need to restore IAMR when returning to kernel space.
+	 */
+}
+
+static inline unsigned long __kuap_get_and_assert_locked(void)
+{
+	unsigned long amr = mfspr(SPRN_AMR);
+
+	if (IS_ENABLED(CONFIG_PPC_KUAP_DEBUG)) /* kuap_check_amr() */
+		WARN_ON_ONCE(amr != AMR_KUAP_BLOCKED);
+	return amr;
+}
+
+/* Do nothing, book3s/64 does that in ASM */
+static inline void __kuap_lock(void)
+{
+}
+
+static inline void __kuap_save_and_lock(struct pt_regs *regs)
+{
+}
+
+/*
+ * We support individually allowing read or write, but we don't support nesting
+ * because that would require an expensive read/modify write of the AMR.
+ */
+
+static inline unsigned long get_kuap(void)
+{
+	/*
+	 * We return AMR_KUAP_BLOCKED when we don't support KUAP because
+	 * prevent_user_access_return needs to return AMR_KUAP_BLOCKED to
+	 * cause restore_user_access to do a flush.
+	 *
+	 * This has no effect in terms of actually blocking things on hash,
+	 * so it doesn't break anything.
+	 */
+	if (!mmu_has_feature(MMU_FTR_BOOK3S_KUAP))
+		return AMR_KUAP_BLOCKED;
+
+	return mfspr(SPRN_AMR);
+}
+
+static __always_inline void set_kuap(unsigned long value)
+{
+	if (!mmu_has_feature(MMU_FTR_BOOK3S_KUAP))
+		return;
+
+	/*
+	 * ISA v3.0B says we need a CSI (Context Synchronising Instruction) both
+	 * before and after the move to AMR. See table 6 on page 1134.
+	 */
+	isync();
+	mtspr(SPRN_AMR, value);
+	isync();
+}
+
+static inline bool __bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
+{
+	/*
+	 * For radix this will be a storage protection fault (DSISR_PROTFAULT).
+	 * For hash this will be a key fault (DSISR_KEYFAULT)
+	 */
+	/*
+	 * We do have exception table entry, but accessing the
+	 * userspace results in fault.  This could be because we
+	 * didn't unlock the AMR or access is denied by userspace
+	 * using a key value that blocks access. We are only interested
+	 * in catching the use case of accessing without unlocking
+	 * the AMR. Hence check for BLOCK_WRITE/READ against AMR.
+	 */
+	if (is_write) {
+		return (regs->amr & AMR_KUAP_BLOCK_WRITE) == AMR_KUAP_BLOCK_WRITE;
+	}
+	return (regs->amr & AMR_KUAP_BLOCK_READ) == AMR_KUAP_BLOCK_READ;
+}
+
+static __always_inline void allow_user_access(void __user *to, const void __user *from,
+					      unsigned long size, unsigned long dir)
+{
+	unsigned long thread_amr = 0;
+
+	// This is written so we can resolve to a single case at build time
+	BUILD_BUG_ON(!__builtin_constant_p(dir));
+
+	if (mmu_has_feature(MMU_FTR_PKEY))
+		thread_amr = current_thread_amr();
+
+	if (dir == KUAP_READ)
+		set_kuap(thread_amr | AMR_KUAP_BLOCK_WRITE);
+	else if (dir == KUAP_WRITE)
+		set_kuap(thread_amr | AMR_KUAP_BLOCK_READ);
+	else if (dir == KUAP_READ_WRITE)
+		set_kuap(thread_amr);
+	else
+		BUILD_BUG();
+}
+
+#else /* CONFIG_PPC_KUAP */
+
+static inline unsigned long get_kuap(void)
+{
+	return AMR_KUAP_BLOCKED;
+}
+
+static inline void set_kuap(unsigned long value) { }
+
+static __always_inline void allow_user_access(void __user *to, const void __user *from,
+					      unsigned long size, unsigned long dir)
+{ }
+
+#endif /* !CONFIG_PPC_KUAP */
+
+static __always_inline void prevent_user_access(unsigned long dir)
+{
+	set_kuap(AMR_KUAP_BLOCKED);
+	if (static_branch_unlikely(&uaccess_flush_key))
+		do_uaccess_flush();
+}
+
+static inline unsigned long prevent_user_access_return(void)
+{
+	unsigned long flags = get_kuap();
+
+	set_kuap(AMR_KUAP_BLOCKED);
+	if (static_branch_unlikely(&uaccess_flush_key))
+		do_uaccess_flush();
+
+	return flags;
+}
+
+static inline void restore_user_access(unsigned long flags)
+{
+	set_kuap(flags);
+	if (static_branch_unlikely(&uaccess_flush_key) && flags == AMR_KUAP_BLOCKED)
+		do_uaccess_flush();
+}
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_BOOK3S_64_KUP_H */