Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 575 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
new file mode 100644
index 000000000..cdf3c6df5
--- /dev/null
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -0,0 +1,575 @@
+/*
+ * ePAPR hcall interface
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ *
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * This file is provided under a dual BSD/GPL license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* A "hypercall" is an "sc 1" instruction.  This header file provides C
+ * wrapper functions for the ePAPR hypervisor interface.  It is inteded
+ * for use by Linux device drivers and other operating systems.
+ *
+ * The hypercalls are implemented as inline assembly, rather than assembly
+ * language functions in a .S file, for optimization.  It allows
+ * the caller to issue the hypercall instruction directly, improving both
+ * performance and memory footprint.
+ */
+
+#ifndef _EPAPR_HCALLS_H
+#define _EPAPR_HCALLS_H
+
+#include <uapi/asm/epapr_hcalls.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <asm/byteorder.h>
+
+/*
+ * Hypercall register clobber list
+ *
+ * These macros are used to define the list of clobbered registers during a
+ * hypercall.  Technically, registers r0 and r3-r12 are always clobbered,
+ * but the gcc inline assembly syntax does not allow us to specify registers
+ * on the clobber list that are also on the input/output list.  Therefore,
+ * the lists of clobbered registers depends on the number of register
+ * parameters ("+r" and "=r") passed to the hypercall.
+ *
+ * Each assembly block should use one of the HCALL_CLOBBERSx macros.  As a
+ * general rule, 'x' is the number of parameters passed to the assembly
+ * block *except* for r11.
+ *
+ * If you're not sure, just use the smallest value of 'x' that does not
+ * generate a compilation error.  Because these are static inline functions,
+ * the compiler will only check the clobber list for a function if you
+ * compile code that calls that function.
+ *
+ * r3 and r11 are not included in any clobbers list because they are always
+ * listed as output registers.
+ *
+ * XER, CTR, and LR are currently listed as clobbers because it's uncertain
+ * whether they will be clobbered.
+ *
+ * Note that r11 can be used as an output parameter.
+ *
+ * The "memory" clobber is only necessary for hcalls where the Hypervisor
+ * will read or write guest memory. However, we add it to all hcalls because
+ * the impact is minimal, and we want to ensure that it's present for the
+ * hcalls that need it.
+*/
+
+/* List of common clobbered registers.  Do not use this macro. */
+#define EV_HCALL_CLOBBERS "r0", "r12", "xer", "ctr", "lr", "cc", "memory"
+
+#define EV_HCALL_CLOBBERS8 EV_HCALL_CLOBBERS
+#define EV_HCALL_CLOBBERS7 EV_HCALL_CLOBBERS8, "r10"
+#define EV_HCALL_CLOBBERS6 EV_HCALL_CLOBBERS7, "r9"
+#define EV_HCALL_CLOBBERS5 EV_HCALL_CLOBBERS6, "r8"
+#define EV_HCALL_CLOBBERS4 EV_HCALL_CLOBBERS5, "r7"
+#define EV_HCALL_CLOBBERS3 EV_HCALL_CLOBBERS4, "r6"
+#define EV_HCALL_CLOBBERS2 EV_HCALL_CLOBBERS3, "r5"
+#define EV_HCALL_CLOBBERS1 EV_HCALL_CLOBBERS2, "r4"
+
+extern bool epapr_paravirt_enabled;
+extern u32 epapr_hypercall_start[];
+
+#ifdef CONFIG_EPAPR_PARAVIRT
+int __init epapr_paravirt_early_init(void);
+#else
+static inline int epapr_paravirt_early_init(void) { return 0; }
+#endif
+
+/*
+ * We use "uintptr_t" to define a register because it's guaranteed to be a
+ * 32-bit integer on a 32-bit platform, and a 64-bit integer on a 64-bit
+ * platform.
+ *
+ * All registers are either input/output or output only.  Registers that are
+ * initialized before making the hypercall are input/output.  All
+ * input/output registers are represented with "+r".  Output-only registers
+ * are represented with "=r".  Do not specify any unused registers.  The
+ * clobber list will tell the compiler that the hypercall modifies those
+ * registers, which is good enough.
+ */
+
+/**
+ * ev_int_set_config - configure the specified interrupt
+ * @interrupt: the interrupt number
+ * @config: configuration for this interrupt
+ * @priority: interrupt priority
+ * @destination: destination CPU number
+ *
+ * Returns 0 for success, or an error code.
+ */
+static inline unsigned int ev_int_set_config(unsigned int interrupt,
+	uint32_t config, unsigned int priority, uint32_t destination)
+{
+	register uintptr_t r11 __asm__("r11");
+	register uintptr_t r3 __asm__("r3");
+	register uintptr_t r4 __asm__("r4");
+	register uintptr_t r5 __asm__("r5");
+	register uintptr_t r6 __asm__("r6");
+
+	r11 = EV_HCALL_TOKEN(EV_INT_SET_CONFIG);
+	r3  = interrupt;
+	r4  = config;
+	r5  = priority;
+	r6  = destination;
+
+	asm volatile("bl	epapr_hypercall_start"
+		: "+r" (r11), "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6)
+		: : EV_HCALL_CLOBBERS4
+	);
+
+	return r3;
+}
+
+/**
+ * ev_int_get_config - return the config of the specified interrupt
+ * @interrupt: the interrupt number
+ * @config: returned configuration for this interrupt
+ * @priority: returned interrupt priority
+ * @destination: returned destination CPU number
+ *
+ * Returns 0 for success, or an error code.
+ */
+static inline unsigned int ev_int_get_config(unsigned int interrupt,
+	uint32_t *config, unsigned int *priority, uint32_t *destination)
+{
+	register uintptr_t r11 __asm__("r11");
+	register uintptr_t r3 __asm__("r3");
+	register uintptr_t r4 __asm__("r4");
+	register uintptr_t r5 __asm__("r5");
+	register uintptr_t r6 __asm__("r6");
+
+	r11 = EV_HCALL_TOKEN(EV_INT_GET_CONFIG);
+	r3 = interrupt;
+
+	asm volatile("bl	epapr_hypercall_start"
+		: "+r" (r11), "+r" (r3), "=r" (r4), "=r" (r5), "=r" (r6)
+		: : EV_HCALL_CLOBBERS4
+	);
+
+	*config = r4;
+	*priority = r5;
+	*destination = r6;
+
+	return r3;
+}
+
+/**
+ * ev_int_set_mask - sets the mask for the specified interrupt source
+ * @interrupt: the interrupt number
+ * @mask: 0=enable interrupts, 1=disable interrupts
+ *
+ * Returns 0 for success, or an error code.
+ */
+static inline unsigned int ev_int_set_mask(unsigned int interrupt,
+	unsigned int mask)
+{
+	register uintptr_t r11 __asm__("r11");
+	register uintptr_t r3 __asm__("r3");
+	register uintptr_t r4 __asm__("r4");
+
+	r11 = EV_HCALL_TOKEN(EV_INT_SET_MASK);
+	r3 = interrupt;
+	r4 = mask;
+
+	asm volatile("bl	epapr_hypercall_start"
+		: "+r" (r11), "+r" (r3), "+r" (r4)
+		: : EV_HCALL_CLOBBERS2
+	);
+
+	return r3;
+}
+
+/**
+ * ev_int_get_mask - returns the mask for the specified interrupt source
+ * @interrupt: the interrupt number
+ * @mask: returned mask for this interrupt (0=enabled, 1=disabled)
+ *
+ * Returns 0 for success, or an error code.
+ */
+static inline unsigned int ev_int_get_mask(unsigned int interrupt,
+	unsigned int *mask)
+{
+	register uintptr_t r11 __asm__("r11");
+	register uintptr_t r3 __asm__("r3");
+	register uintptr_t r4 __asm__("r4");
+
+	r11 = EV_HCALL_TOKEN(EV_INT_GET_MASK);
+	r3 = interrupt;
+
+	asm volatile("bl	epapr_hypercall_start"
+		: "+r" (r11), "+r" (r3), "=r" (r4)
+		: : EV_HCALL_CLOBBERS2
+	);
+
+	*mask = r4;
+
+	return r3;
+}
+
+/**
+ * ev_int_eoi - signal the end of interrupt processing
+ * @interrupt: the interrupt number
+ *
+ * This function signals the end of processing for the specified
+ * interrupt, which must be the interrupt currently in service. By
+ * definition, this is also the highest-priority interrupt.
+ *
+ * Returns 0 for success, or an error code.
+ */
+static inline unsigned int ev_int_eoi(unsigned int interrupt)
+{
+	register uintptr_t r11 __asm__("r11");
+	register uintptr_t r3 __asm__("r3");
+
+	r11 = EV_HCALL_TOKEN(EV_INT_EOI);
+	r3 = interrupt;
+
+	asm volatile("bl	epapr_hypercall_start"
+		: "+r" (r11), "+r" (r3)
+		: : EV_HCALL_CLOBBERS1
+	);
+
+	return r3;
+}
+
+/**
+ * ev_byte_channel_send - send characters to a byte stream
+ * @handle: byte stream handle
+ * @count: (input) num of chars to send, (output) num chars sent
+ * @buffer: pointer to a 16-byte buffer
+ *
+ * @buffer must be at least 16 bytes long, because all 16 bytes will be
+ * read from memory into registers, even if count < 16.
+ *
+ * Returns 0 for success, or an error code.
+ */
+static inline unsigned int ev_byte_channel_send(unsigned int handle,
+	unsigned int *count, const char buffer[EV_BYTE_CHANNEL_MAX_BYTES])
+{
+	register uintptr_t r11 __asm__("r11");
+	register uintptr_t r3 __asm__("r3");
+	register uintptr_t r4 __asm__("r4");
+	register uintptr_t r5 __asm__("r5");
+	register uintptr_t r6 __asm__("r6");
+	register uintptr_t r7 __asm__("r7");
+	register uintptr_t r8 __asm__("r8");
+	const uint32_t *p = (const uint32_t *) buffer;
+
+	r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_SEND);
+	r3 = handle;
+	r4 = *count;
+	r5 = be32_to_cpu(p[0]);
+	r6 = be32_to_cpu(p[1]);
+	r7 = be32_to_cpu(p[2]);
+	r8 = be32_to_cpu(p[3]);
+
+	asm volatile("bl	epapr_hypercall_start"
+		: "+r" (r11), "+r" (r3),
+		  "+r" (r4), "+r" (r5), "+r" (r6), "+r" (r7), "+r" (r8)
+		: : EV_HCALL_CLOBBERS6
+	);
+
+	*count = r4;
+
+	return r3;
+}
+
+/**
+ * ev_byte_channel_receive - fetch characters from a byte channel
+ * @handle: byte channel handle
+ * @count: (input) max num of chars to receive, (output) num chars received
+ * @buffer: pointer to a 16-byte buffer
+ *
+ * The size of @buffer must be at least 16 bytes, even if you request fewer
+ * than 16 characters, because we always write 16 bytes to @buffer.  This is
+ * for performance reasons.
+ *
+ * Returns 0 for success, or an error code.
+ */
+static inline unsigned int ev_byte_channel_receive(unsigned int handle,
+	unsigned int *count, char buffer[EV_BYTE_CHANNEL_MAX_BYTES])
+{
+	register uintptr_t r11 __asm__("r11");
+	register uintptr_t r3 __asm__("r3");
+	register uintptr_t r4 __asm__("r4");
+	register uintptr_t r5 __asm__("r5");
+	register uintptr_t r6 __asm__("r6");
+	register uintptr_t r7 __asm__("r7");
+	register uintptr_t r8 __asm__("r8");
+	uint32_t *p = (uint32_t *) buffer;
+
+	r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_RECEIVE);
+	r3 = handle;
+	r4 = *count;
+
+	asm volatile("bl	epapr_hypercall_start"
+		: "+r" (r11), "+r" (r3), "+r" (r4),
+		  "=r" (r5), "=r" (r6), "=r" (r7), "=r" (r8)
+		: : EV_HCALL_CLOBBERS6
+	);
+
+	*count = r4;
+	p[0] = cpu_to_be32(r5);
+	p[1] = cpu_to_be32(r6);
+	p[2] = cpu_to_be32(r7);
+	p[3] = cpu_to_be32(r8);
+
+	return r3;
+}
+
+/**
+ * ev_byte_channel_poll - returns the status of the byte channel buffers
+ * @handle: byte channel handle
+ * @rx_count: returned count of bytes in receive queue
+ * @tx_count: returned count of free space in transmit queue
+ *
+ * This function reports the amount of data in the receive queue (i.e. the
+ * number of bytes you can read), and the amount of free space in the transmit
+ * queue (i.e. the number of bytes you can write).
+ *
+ * Returns 0 for success, or an error code.
+ */
+static inline unsigned int ev_byte_channel_poll(unsigned int handle,
+	unsigned int *rx_count,	unsigned int *tx_count)
+{
+	register uintptr_t r11 __asm__("r11");
+	register uintptr_t r3 __asm__("r3");
+	register uintptr_t r4 __asm__("r4");
+	register uintptr_t r5 __asm__("r5");
+
+	r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_POLL);
+	r3 = handle;
+
+	asm volatile("bl	epapr_hypercall_start"
+		: "+r" (r11), "+r" (r3), "=r" (r4), "=r" (r5)
+		: : EV_HCALL_CLOBBERS3
+	);
+
+	*rx_count = r4;
+	*tx_count = r5;
+
+	return r3;
+}
+
+/**
+ * ev_int_iack - acknowledge an interrupt
+ * @handle: handle to the target interrupt controller
+ * @vector: returned interrupt vector
+ *
+ * If handle is zero, the function returns the next interrupt source
+ * number to be handled irrespective of the hierarchy or cascading
+ * of interrupt controllers. If non-zero, specifies a handle to the
+ * interrupt controller that is the target of the acknowledge.
+ *
+ * Returns 0 for success, or an error code.
+ */
+static inline unsigned int ev_int_iack(unsigned int handle,
+	unsigned int *vector)
+{
+	register uintptr_t r11 __asm__("r11");
+	register uintptr_t r3 __asm__("r3");
+	register uintptr_t r4 __asm__("r4");
+
+	r11 = EV_HCALL_TOKEN(EV_INT_IACK);
+	r3 = handle;
+
+	asm volatile("bl	epapr_hypercall_start"
+		: "+r" (r11), "+r" (r3), "=r" (r4)
+		: : EV_HCALL_CLOBBERS2
+	);
+
+	*vector = r4;
+
+	return r3;
+}
+
+/**
+ * ev_doorbell_send - send a doorbell to another partition
+ * @handle: doorbell send handle
+ *
+ * Returns 0 for success, or an error code.
+ */
+static inline unsigned int ev_doorbell_send(unsigned int handle)
+{
+	register uintptr_t r11 __asm__("r11");
+	register uintptr_t r3 __asm__("r3");
+
+	r11 = EV_HCALL_TOKEN(EV_DOORBELL_SEND);
+	r3 = handle;
+
+	asm volatile("bl	epapr_hypercall_start"
+		: "+r" (r11), "+r" (r3)
+		: : EV_HCALL_CLOBBERS1
+	);
+
+	return r3;
+}
+
+/**
+ * ev_idle -- wait for next interrupt on this core
+ *
+ * Returns 0 for success, or an error code.
+ */
+static inline unsigned int ev_idle(void)
+{
+	register uintptr_t r11 __asm__("r11");
+	register uintptr_t r3 __asm__("r3");
+
+	r11 = EV_HCALL_TOKEN(EV_IDLE);
+
+	asm volatile("bl	epapr_hypercall_start"
+		: "+r" (r11), "=r" (r3)
+		: : EV_HCALL_CLOBBERS1
+	);
+
+	return r3;
+}
+
+#ifdef CONFIG_EPAPR_PARAVIRT
+static inline unsigned long epapr_hypercall(unsigned long *in,
+			    unsigned long *out,
+			    unsigned long nr)
+{
+	register unsigned long r0 asm("r0");
+	register unsigned long r3 asm("r3") = in[0];
+	register unsigned long r4 asm("r4") = in[1];
+	register unsigned long r5 asm("r5") = in[2];
+	register unsigned long r6 asm("r6") = in[3];
+	register unsigned long r7 asm("r7") = in[4];
+	register unsigned long r8 asm("r8") = in[5];
+	register unsigned long r9 asm("r9") = in[6];
+	register unsigned long r10 asm("r10") = in[7];
+	register unsigned long r11 asm("r11") = nr;
+	register unsigned long r12 asm("r12");
+
+	asm volatile("bl	epapr_hypercall_start"
+		     : "=r"(r0), "=r"(r3), "=r"(r4), "=r"(r5), "=r"(r6),
+		       "=r"(r7), "=r"(r8), "=r"(r9), "=r"(r10), "=r"(r11),
+		       "=r"(r12)
+		     : "r"(r3), "r"(r4), "r"(r5), "r"(r6), "r"(r7), "r"(r8),
+		       "r"(r9), "r"(r10), "r"(r11)
+		     : "memory", "cc", "xer", "ctr", "lr");
+
+	out[0] = r4;
+	out[1] = r5;
+	out[2] = r6;
+	out[3] = r7;
+	out[4] = r8;
+	out[5] = r9;
+	out[6] = r10;
+	out[7] = r11;
+
+	return r3;
+}
+#else
+static unsigned long epapr_hypercall(unsigned long *in,
+				   unsigned long *out,
+				   unsigned long nr)
+{
+	return EV_UNIMPLEMENTED;
+}
+#endif
+
+static inline long epapr_hypercall0_1(unsigned int nr, unsigned long *r2)
+{
+	unsigned long in[8] = {0};
+	unsigned long out[8];
+	unsigned long r;
+
+	r = epapr_hypercall(in, out, nr);
+	*r2 = out[0];
+
+	return r;
+}
+
+static inline long epapr_hypercall0(unsigned int nr)
+{
+	unsigned long in[8] = {0};
+	unsigned long out[8];
+
+	return epapr_hypercall(in, out, nr);
+}
+
+static inline long epapr_hypercall1(unsigned int nr, unsigned long p1)
+{
+	unsigned long in[8] = {0};
+	unsigned long out[8];
+
+	in[0] = p1;
+	return epapr_hypercall(in, out, nr);
+}
+
+static inline long epapr_hypercall2(unsigned int nr, unsigned long p1,
+				    unsigned long p2)
+{
+	unsigned long in[8] = {0};
+	unsigned long out[8];
+
+	in[0] = p1;
+	in[1] = p2;
+	return epapr_hypercall(in, out, nr);
+}
+
+static inline long epapr_hypercall3(unsigned int nr, unsigned long p1,
+				    unsigned long p2, unsigned long p3)
+{
+	unsigned long in[8] = {0};
+	unsigned long out[8];
+
+	in[0] = p1;
+	in[1] = p2;
+	in[2] = p3;
+	return epapr_hypercall(in, out, nr);
+}
+
+static inline long epapr_hypercall4(unsigned int nr, unsigned long p1,
+				    unsigned long p2, unsigned long p3,
+				    unsigned long p4)
+{
+	unsigned long in[8] = {0};
+	unsigned long out[8];
+
+	in[0] = p1;
+	in[1] = p2;
+	in[2] = p3;
+	in[3] = p4;
+	return epapr_hypercall(in, out, nr);
+}
+#endif /* !__ASSEMBLY__ */
+#endif /* _EPAPR_HCALLS_H */