Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 343 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/sfp-machine.h b/arch/powerpc/include/asm/sfp-machine.h
new file mode 100644
index 000000000..8b957aabb
--- /dev/null
+++ b/arch/powerpc/include/asm/sfp-machine.h
@@ -0,0 +1,343 @@
+/* Machine-dependent software floating-point definitions.  PPC version.
+   Copyright (C) 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+   Actually, this is a PPC (32bit) version, written based on the
+   i386, sparc, and sparc64 versions, by me,
+   Peter Maydell (pmaydell@chiark.greenend.org.uk).
+   Comments are by and large also mine, although they may be inaccurate.
+
+   In picking out asm fragments I've gone with the lowest common
+   denominator, which also happens to be the hardware I have :->
+   That is, a SPARC without hardware multiply and divide.
+ */
+
+/* basic word size definitions */
+#define _FP_W_TYPE_SIZE		32
+#define _FP_W_TYPE		unsigned int
+#define _FP_WS_TYPE		signed int
+#define _FP_I_TYPE		int
+
+#define __ll_B			((UWtype) 1 << (W_TYPE_SIZE / 2))
+#define __ll_lowpart(t)		((UWtype) (t) & (__ll_B - 1))
+#define __ll_highpart(t)	((UWtype) (t) >> (W_TYPE_SIZE / 2))
+
+/* You can optionally code some things like addition in asm. For
+ * example, i386 defines __FP_FRAC_ADD_2 as asm. If you don't
+ * then you get a fragment of C code [if you change an #ifdef 0
+ * in op-2.h] or a call to add_ssaaaa (see below).
+ * Good places to look for asm fragments to use are gcc and glibc.
+ * gcc's longlong.h is useful.
+ */
+
+/* We need to know how to multiply and divide. If the host word size
+ * is >= 2*fracbits you can use FP_MUL_MEAT_n_imm(t,R,X,Y) which
+ * codes the multiply with whatever gcc does to 'a * b'.
+ * _FP_MUL_MEAT_n_wide(t,R,X,Y,f) is used when you have an asm
+ * function that can multiply two 1W values and get a 2W result.
+ * Otherwise you're stuck with _FP_MUL_MEAT_n_hard(t,R,X,Y) which
+ * does bitshifting to avoid overflow.
+ * For division there is FP_DIV_MEAT_n_imm(t,R,X,Y,f) for word size
+ * >= 2*fracbits, where f is either _FP_DIV_HELP_imm or
+ * _FP_DIV_HELP_ldiv (see op-1.h).
+ * _FP_DIV_MEAT_udiv() is if you have asm to do 2W/1W => (1W, 1W).
+ * [GCC and glibc have longlong.h which has the asm macro udiv_qrnnd
+ * to do this.]
+ * In general, 'n' is the number of words required to hold the type,
+ * and 't' is either S, D or Q for single/double/quad.
+ *           -- PMM
+ */
+/* Example: SPARC64:
+ * #define _FP_MUL_MEAT_S(R,X,Y)	_FP_MUL_MEAT_1_imm(S,R,X,Y)
+ * #define _FP_MUL_MEAT_D(R,X,Y)	_FP_MUL_MEAT_1_wide(D,R,X,Y,umul_ppmm)
+ * #define _FP_MUL_MEAT_Q(R,X,Y)	_FP_MUL_MEAT_2_wide(Q,R,X,Y,umul_ppmm)
+ *
+ * #define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm)
+ * #define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_1_udiv(D,R,X,Y)
+ * #define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_2_udiv_64(Q,R,X,Y)
+ *
+ * Example: i386:
+ * #define _FP_MUL_MEAT_S(R,X,Y)   _FP_MUL_MEAT_1_wide(S,R,X,Y,_i386_mul_32_64)
+ * #define _FP_MUL_MEAT_D(R,X,Y)   _FP_MUL_MEAT_2_wide(D,R,X,Y,_i386_mul_32_64)
+ *
+ * #define _FP_DIV_MEAT_S(R,X,Y)   _FP_DIV_MEAT_1_udiv(S,R,X,Y,_i386_div_64_32)
+ * #define _FP_DIV_MEAT_D(R,X,Y)   _FP_DIV_MEAT_2_udiv_64(D,R,X,Y)
+ */
+
+#define _FP_MUL_MEAT_S(R,X,Y)   _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_D(R,X,Y)   _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_udiv_norm(S,R,X,Y)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_2_udiv(D,R,X,Y)
+
+/* These macros define what NaN looks like. They're supposed to expand to
+ * a comma-separated set of 32bit unsigned ints that encode NaN.
+ */
+#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1), -1
+#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
+#define _FP_NANSIGN_S		0
+#define _FP_NANSIGN_D		0
+#define _FP_NANSIGN_Q		0
+
+#define _FP_KEEPNANFRACP 1
+
+#ifdef FP_EX_BOOKE_E500_SPE
+#define FP_EX_INEXACT		(1 << 21)
+#define FP_EX_INVALID		(1 << 20)
+#define FP_EX_DIVZERO		(1 << 19)
+#define FP_EX_UNDERFLOW		(1 << 18)
+#define FP_EX_OVERFLOW		(1 << 17)
+#define FP_INHIBIT_RESULTS	0
+
+#define __FPU_FPSCR	(current->thread.spefscr)
+#define __FPU_ENABLED_EXC		\
+({					\
+	(__FPU_FPSCR >> 2) & 0x1f;	\
+})
+#else
+/* Exception flags.  We use the bit positions of the appropriate bits
+   in the FPSCR, which also correspond to the FE_* bits.  This makes
+   everything easier ;-).  */
+#define FP_EX_INVALID         (1 << (31 - 2))
+#define FP_EX_INVALID_SNAN	EFLAG_VXSNAN
+#define FP_EX_INVALID_ISI	EFLAG_VXISI
+#define FP_EX_INVALID_IDI	EFLAG_VXIDI
+#define FP_EX_INVALID_ZDZ	EFLAG_VXZDZ
+#define FP_EX_INVALID_IMZ	EFLAG_VXIMZ
+#define FP_EX_OVERFLOW        (1 << (31 - 3))
+#define FP_EX_UNDERFLOW       (1 << (31 - 4))
+#define FP_EX_DIVZERO         (1 << (31 - 5))
+#define FP_EX_INEXACT         (1 << (31 - 6))
+
+#define __FPU_FPSCR	(current->thread.fp_state.fpscr)
+
+/* We only actually write to the destination register
+ * if exceptions signalled (if any) will not trap.
+ */
+#define __FPU_ENABLED_EXC \
+({						\
+	(__FPU_FPSCR >> 3) & 0x1f;	\
+})
+
+#endif
+
+/*
+ * If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)			\
+  do {								\
+    if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)		\
+	&& !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))	\
+      {								\
+	R##_s = X##_s;						\
+	_FP_FRAC_COPY_##wc(R,X);				\
+      }								\
+    else							\
+      {								\
+	R##_s = Y##_s;						\
+	_FP_FRAC_COPY_##wc(R,Y);				\
+      }								\
+    R##_c = FP_CLS_NAN;						\
+  } while (0)
+
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+#define __FPU_TRAP_P(bits) \
+	((__FPU_ENABLED_EXC & (bits)) != 0)
+
+#define __FP_PACK_S(val,X)			\
+({  int __exc = _FP_PACK_CANONICAL(S,1,X);	\
+    if(!__exc || !__FPU_TRAP_P(__exc))		\
+        _FP_PACK_RAW_1_P(S,val,X);		\
+    __exc;					\
+})
+
+#define __FP_PACK_D(val,X)			\
+   do {									\
+	_FP_PACK_CANONICAL(D, 2, X);					\
+	if (!FP_CUR_EXCEPTIONS || !__FPU_TRAP_P(FP_CUR_EXCEPTIONS))	\
+		_FP_PACK_RAW_2_P(D, val, X);				\
+   } while (0)
+
+#define __FP_PACK_DS(val,X)							\
+   do {										\
+	   FP_DECL_S(__X);							\
+	   FP_CONV(S, D, 1, 2, __X, X);						\
+	   _FP_PACK_CANONICAL(S, 1, __X);					\
+	   if (!FP_CUR_EXCEPTIONS || !__FPU_TRAP_P(FP_CUR_EXCEPTIONS)) {	\
+		   _FP_UNPACK_CANONICAL(S, 1, __X);				\
+		   FP_CONV(D, S, 2, 1, X, __X);					\
+		   _FP_PACK_CANONICAL(D, 2, X);					\
+		   if (!FP_CUR_EXCEPTIONS || !__FPU_TRAP_P(FP_CUR_EXCEPTIONS))	\
+		   _FP_PACK_RAW_2_P(D, val, X);					\
+	   }									\
+   } while (0)
+
+/* Obtain the current rounding mode. */
+#define FP_ROUNDMODE			\
+({					\
+	__FPU_FPSCR & 0x3;		\
+})
+
+/* the asm fragments go here: all these are taken from glibc-2.0.5's
+ * stdlib/longlong.h
+ */
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/* add_ssaaaa is used in op-2.h and should be equivalent to
+ * #define add_ssaaaa(sh,sl,ah,al,bh,bl) (sh = ah+bh+ (( sl = al+bl) < al))
+ * add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1,
+ * high_addend_2, low_addend_2) adds two UWtype integers, composed by
+ * HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and LOW_ADDEND_2
+ * respectively.  The result is placed in HIGH_SUM and LOW_SUM.  Overflow
+ * (i.e. carry out) is not stored anywhere, and is lost.
+ */
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+  do {									\
+    if (__builtin_constant_p (bh) && (bh) == 0)				\
+      __asm__ ("add%I4c %1,%3,%4\n\taddze %0,%2"		\
+	     : "=r" (sh), "=&r" (sl) : "r" (ah), "%r" (al), "rI" (bl));\
+    else if (__builtin_constant_p (bh) && (bh) == ~(USItype) 0)		\
+      __asm__ ("add%I4c %1,%3,%4\n\taddme %0,%2"		\
+	     : "=r" (sh), "=&r" (sl) : "r" (ah), "%r" (al), "rI" (bl));\
+    else								\
+      __asm__ ("add%I5c %1,%4,%5\n\tadde %0,%2,%3"		\
+	     : "=r" (sh), "=&r" (sl)					\
+	     : "%r" (ah), "r" (bh), "%r" (al), "rI" (bl));		\
+  } while (0)
+
+/* sub_ddmmss is used in op-2.h and udivmodti4.c and should be equivalent to
+ * #define sub_ddmmss(sh, sl, ah, al, bh, bl) (sh = ah-bh - ((sl = al-bl) > al))
+ * sub_ddmmss(high_difference, low_difference, high_minuend, low_minuend,
+ * high_subtrahend, low_subtrahend) subtracts two two-word UWtype integers,
+ * composed by HIGH_MINUEND_1 and LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and
+ * LOW_SUBTRAHEND_2 respectively.  The result is placed in HIGH_DIFFERENCE
+ * and LOW_DIFFERENCE.  Overflow (i.e. carry out) is not stored anywhere,
+ * and is lost.
+ */
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+  do {									\
+    if (__builtin_constant_p (ah) && (ah) == 0)				\
+      __asm__ ("subf%I3c %1,%4,%3\n\tsubfze %0,%2"	\
+	       : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "r" (bl));\
+    else if (__builtin_constant_p (ah) && (ah) == ~(USItype) 0)		\
+      __asm__ ("subf%I3c %1,%4,%3\n\tsubfme %0,%2"	\
+	       : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "r" (bl));\
+    else if (__builtin_constant_p (bh) && (bh) == 0)			\
+      __asm__ ("subf%I3c %1,%4,%3\n\taddme %0,%2"		\
+	       : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "r" (bl));\
+    else if (__builtin_constant_p (bh) && (bh) == ~(USItype) 0)		\
+      __asm__ ("subf%I3c %1,%4,%3\n\taddze %0,%2"		\
+	       : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "r" (bl));\
+    else								\
+      __asm__ ("subf%I4c %1,%5,%4\n\tsubfe %0,%3,%2"	\
+	       : "=r" (sh), "=&r" (sl)					\
+	       : "r" (ah), "r" (bh), "rI" (al), "r" (bl));		\
+  } while (0)
+
+/* asm fragments for mul and div */
+
+/* umul_ppmm(high_prod, low_prod, multipler, multiplicand) multiplies two
+ * UWtype integers MULTIPLER and MULTIPLICAND, and generates a two UWtype
+ * word product in HIGH_PROD and LOW_PROD.
+ */
+#define umul_ppmm(ph, pl, m0, m1) \
+  do {									\
+    USItype __m0 = (m0), __m1 = (m1);					\
+    __asm__ ("mulhwu %0,%1,%2" : "=r" (ph) : "%r" (m0), "r" (m1));	\
+    (pl) = __m0 * __m1;							\
+  } while (0)
+
+/* udiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
+ * denominator) divides a UDWtype, composed by the UWtype integers
+ * HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and places the quotient
+ * in QUOTIENT and the remainder in REMAINDER.  HIGH_NUMERATOR must be less
+ * than DENOMINATOR for correct operation.  If, in addition, the most
+ * significant bit of DENOMINATOR must be 1, then the pre-processor symbol
+ * UDIV_NEEDS_NORMALIZATION is defined to 1.
+ */
+#define udiv_qrnnd(q, r, n1, n0, d) \
+  do {									\
+    UWtype __d1, __d0, __q1, __q0;					\
+    UWtype __r1, __r0, __m;						\
+    __d1 = __ll_highpart (d);						\
+    __d0 = __ll_lowpart (d);						\
+									\
+    __r1 = (n1) % __d1;							\
+    __q1 = (n1) / __d1;							\
+    __m = (UWtype) __q1 * __d0;						\
+    __r1 = __r1 * __ll_B | __ll_highpart (n0);				\
+    if (__r1 < __m)							\
+      {									\
+	__q1--, __r1 += (d);						\
+	if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\
+	  if (__r1 < __m)						\
+	    __q1--, __r1 += (d);					\
+      }									\
+    __r1 -= __m;							\
+									\
+    __r0 = __r1 % __d1;							\
+    __q0 = __r1 / __d1;							\
+    __m = (UWtype) __q0 * __d0;						\
+    __r0 = __r0 * __ll_B | __ll_lowpart (n0);				\
+    if (__r0 < __m)							\
+      {									\
+	__q0--, __r0 += (d);						\
+	if (__r0 >= (d))						\
+	  if (__r0 < __m)						\
+	    __q0--, __r0 += (d);					\
+      }									\
+    __r0 -= __m;							\
+									\
+    (q) = (UWtype) __q1 * __ll_B | __q0;				\
+    (r) = __r0;								\
+  } while (0)
+
+#define UDIV_NEEDS_NORMALIZATION 1
+
+#define abort()								\
+	return 0
+
+#ifdef __BIG_ENDIAN
+#define __BYTE_ORDER __BIG_ENDIAN
+#else
+#define __BYTE_ORDER __LITTLE_ENDIAN
+#endif
+
+/* Exception flags. */
+#define EFLAG_INVALID		(1 << (31 - 2))
+#define EFLAG_OVERFLOW		(1 << (31 - 3))
+#define EFLAG_UNDERFLOW		(1 << (31 - 4))
+#define EFLAG_DIVZERO		(1 << (31 - 5))
+#define EFLAG_INEXACT		(1 << (31 - 6))
+
+#define EFLAG_VXSNAN		(1 << (31 - 7))
+#define EFLAG_VXISI		(1 << (31 - 8))
+#define EFLAG_VXIDI		(1 << (31 - 9))
+#define EFLAG_VXZDZ		(1 << (31 - 10))
+#define EFLAG_VXIMZ		(1 << (31 - 11))
+#define EFLAG_VXVC		(1 << (31 - 12))
+#define EFLAG_VXSOFT		(1 << (31 - 21))
+#define EFLAG_VXSQRT		(1 << (31 - 22))
+#define EFLAG_VXCVI		(1 << (31 - 23))