Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 736 insertions, 0 deletions

diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h
new file mode 100644
index 000000000..9f18fa090
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/kvm.h
@@ -0,0 +1,736 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __LINUX_KVM_POWERPC_H
+#define __LINUX_KVM_POWERPC_H
+
+#include <linux/types.h>
+
+/* Select powerpc specific features in <linux/kvm.h> */
+#define __KVM_HAVE_SPAPR_TCE
+#define __KVM_HAVE_PPC_SMT
+#define __KVM_HAVE_IRQCHIP
+#define __KVM_HAVE_IRQ_LINE
+#define __KVM_HAVE_GUEST_DEBUG
+
+/* Not always available, but if it is, this is the correct offset.  */
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+
+struct kvm_regs {
+	__u64 pc;
+	__u64 cr;
+	__u64 ctr;
+	__u64 lr;
+	__u64 xer;
+	__u64 msr;
+	__u64 srr0;
+	__u64 srr1;
+	__u64 pid;
+
+	__u64 sprg0;
+	__u64 sprg1;
+	__u64 sprg2;
+	__u64 sprg3;
+	__u64 sprg4;
+	__u64 sprg5;
+	__u64 sprg6;
+	__u64 sprg7;
+
+	__u64 gpr[32];
+};
+
+#define KVM_SREGS_E_IMPL_NONE	0
+#define KVM_SREGS_E_IMPL_FSL	1
+
+#define KVM_SREGS_E_FSL_PIDn	(1 << 0) /* PID1/PID2 */
+
+/* flags for kvm_run.flags */
+#define KVM_RUN_PPC_NMI_DISP_MASK		(3 << 0)
+#define   KVM_RUN_PPC_NMI_DISP_FULLY_RECOV	(1 << 0)
+#define   KVM_RUN_PPC_NMI_DISP_LIMITED_RECOV	(2 << 0)
+#define   KVM_RUN_PPC_NMI_DISP_NOT_RECOV	(3 << 0)
+
+/*
+ * Feature bits indicate which sections of the sregs struct are valid,
+ * both in KVM_GET_SREGS and KVM_SET_SREGS.  On KVM_SET_SREGS, registers
+ * corresponding to unset feature bits will not be modified.  This allows
+ * restoring a checkpoint made without that feature, while keeping the
+ * default values of the new registers.
+ *
+ * KVM_SREGS_E_BASE contains:
+ * CSRR0/1 (refers to SRR2/3 on 40x)
+ * ESR
+ * DEAR
+ * MCSR
+ * TSR
+ * TCR
+ * DEC
+ * TB
+ * VRSAVE (USPRG0)
+ */
+#define KVM_SREGS_E_BASE		(1 << 0)
+
+/*
+ * KVM_SREGS_E_ARCH206 contains:
+ *
+ * PIR
+ * MCSRR0/1
+ * DECAR
+ * IVPR
+ */
+#define KVM_SREGS_E_ARCH206		(1 << 1)
+
+/*
+ * Contains EPCR, plus the upper half of 64-bit registers
+ * that are 32-bit on 32-bit implementations.
+ */
+#define KVM_SREGS_E_64			(1 << 2)
+
+#define KVM_SREGS_E_SPRG8		(1 << 3)
+#define KVM_SREGS_E_MCIVPR		(1 << 4)
+
+/*
+ * IVORs are used -- contains IVOR0-15, plus additional IVORs
+ * in combination with an appropriate feature bit.
+ */
+#define KVM_SREGS_E_IVOR		(1 << 5)
+
+/*
+ * Contains MAS0-4, MAS6-7, TLBnCFG, MMUCFG.
+ * Also TLBnPS if MMUCFG[MAVN] = 1.
+ */
+#define KVM_SREGS_E_ARCH206_MMU		(1 << 6)
+
+/* DBSR, DBCR, IAC, DAC, DVC */
+#define KVM_SREGS_E_DEBUG		(1 << 7)
+
+/* Enhanced debug -- DSRR0/1, SPRG9 */
+#define KVM_SREGS_E_ED			(1 << 8)
+
+/* Embedded Floating Point (SPE) -- IVOR32-34 if KVM_SREGS_E_IVOR */
+#define KVM_SREGS_E_SPE			(1 << 9)
+
+/*
+ * DEPRECATED! USE ONE_REG FOR THIS ONE!
+ * External Proxy (EXP) -- EPR
+ */
+#define KVM_SREGS_EXP			(1 << 10)
+
+/* External PID (E.PD) -- EPSC/EPLC */
+#define KVM_SREGS_E_PD			(1 << 11)
+
+/* Processor Control (E.PC) -- IVOR36-37 if KVM_SREGS_E_IVOR */
+#define KVM_SREGS_E_PC			(1 << 12)
+
+/* Page table (E.PT) -- EPTCFG */
+#define KVM_SREGS_E_PT			(1 << 13)
+
+/* Embedded Performance Monitor (E.PM) -- IVOR35 if KVM_SREGS_E_IVOR */
+#define KVM_SREGS_E_PM			(1 << 14)
+
+/*
+ * Special updates:
+ *
+ * Some registers may change even while a vcpu is not running.
+ * To avoid losing these changes, by default these registers are
+ * not updated by KVM_SET_SREGS.  To force an update, set the bit
+ * in u.e.update_special corresponding to the register to be updated.
+ *
+ * The update_special field is zero on return from KVM_GET_SREGS.
+ *
+ * When restoring a checkpoint, the caller can set update_special
+ * to 0xffffffff to ensure that everything is restored, even new features
+ * that the caller doesn't know about.
+ */
+#define KVM_SREGS_E_UPDATE_MCSR		(1 << 0)
+#define KVM_SREGS_E_UPDATE_TSR		(1 << 1)
+#define KVM_SREGS_E_UPDATE_DEC		(1 << 2)
+#define KVM_SREGS_E_UPDATE_DBSR		(1 << 3)
+
+/*
+ * In KVM_SET_SREGS, reserved/pad fields must be left untouched from a
+ * previous KVM_GET_REGS.
+ *
+ * Unless otherwise indicated, setting any register with KVM_SET_SREGS
+ * directly sets its value.  It does not trigger any special semantics such
+ * as write-one-to-clear.  Calling KVM_SET_SREGS on an unmodified struct
+ * just received from KVM_GET_SREGS is always a no-op.
+ */
+struct kvm_sregs {
+	__u32 pvr;
+	union {
+		struct {
+			__u64 sdr1;
+			struct {
+				struct {
+					__u64 slbe;
+					__u64 slbv;
+				} slb[64];
+			} ppc64;
+			struct {
+				__u32 sr[16];
+				__u64 ibat[8];
+				__u64 dbat[8];
+			} ppc32;
+		} s;
+		struct {
+			union {
+				struct { /* KVM_SREGS_E_IMPL_FSL */
+					__u32 features; /* KVM_SREGS_E_FSL_ */
+					__u32 svr;
+					__u64 mcar;
+					__u32 hid0;
+
+					/* KVM_SREGS_E_FSL_PIDn */
+					__u32 pid1, pid2;
+				} fsl;
+				__u8 pad[256];
+			} impl;
+
+			__u32 features; /* KVM_SREGS_E_ */
+			__u32 impl_id;	/* KVM_SREGS_E_IMPL_ */
+			__u32 update_special; /* KVM_SREGS_E_UPDATE_ */
+			__u32 pir;	/* read-only */
+			__u64 sprg8;
+			__u64 sprg9;	/* E.ED */
+			__u64 csrr0;
+			__u64 dsrr0;	/* E.ED */
+			__u64 mcsrr0;
+			__u32 csrr1;
+			__u32 dsrr1;	/* E.ED */
+			__u32 mcsrr1;
+			__u32 esr;
+			__u64 dear;
+			__u64 ivpr;
+			__u64 mcivpr;
+			__u64 mcsr;	/* KVM_SREGS_E_UPDATE_MCSR */
+
+			__u32 tsr;	/* KVM_SREGS_E_UPDATE_TSR */
+			__u32 tcr;
+			__u32 decar;
+			__u32 dec;	/* KVM_SREGS_E_UPDATE_DEC */
+
+			/*
+			 * Userspace can read TB directly, but the
+			 * value reported here is consistent with "dec".
+			 *
+			 * Read-only.
+			 */
+			__u64 tb;
+
+			__u32 dbsr;	/* KVM_SREGS_E_UPDATE_DBSR */
+			__u32 dbcr[3];
+			/*
+			 * iac/dac registers are 64bit wide, while this API
+			 * interface provides only lower 32 bits on 64 bit
+			 * processors. ONE_REG interface is added for 64bit
+			 * iac/dac registers.
+			 */
+			__u32 iac[4];
+			__u32 dac[2];
+			__u32 dvc[2];
+			__u8 num_iac;	/* read-only */
+			__u8 num_dac;	/* read-only */
+			__u8 num_dvc;	/* read-only */
+			__u8 pad;
+
+			__u32 epr;	/* EXP */
+			__u32 vrsave;	/* a.k.a. USPRG0 */
+			__u32 epcr;	/* KVM_SREGS_E_64 */
+
+			__u32 mas0;
+			__u32 mas1;
+			__u64 mas2;
+			__u64 mas7_3;
+			__u32 mas4;
+			__u32 mas6;
+
+			__u32 ivor_low[16]; /* IVOR0-15 */
+			__u32 ivor_high[18]; /* IVOR32+, plus room to expand */
+
+			__u32 mmucfg;	/* read-only */
+			__u32 eptcfg;	/* E.PT, read-only */
+			__u32 tlbcfg[4];/* read-only */
+			__u32 tlbps[4]; /* read-only */
+
+			__u32 eplc, epsc; /* E.PD */
+		} e;
+		__u8 pad[1020];
+	} u;
+};
+
+struct kvm_fpu {
+	__u64 fpr[32];
+};
+
+/*
+ * Defines for h/w breakpoint, watchpoint (read, write or both) and
+ * software breakpoint.
+ * These are used as "type" in KVM_SET_GUEST_DEBUG ioctl and "status"
+ * for KVM_DEBUG_EXIT.
+ */
+#define KVMPPC_DEBUG_NONE		0x0
+#define KVMPPC_DEBUG_BREAKPOINT		(1UL << 1)
+#define KVMPPC_DEBUG_WATCH_WRITE	(1UL << 2)
+#define KVMPPC_DEBUG_WATCH_READ		(1UL << 3)
+struct kvm_debug_exit_arch {
+	__u64 address;
+	/*
+	 * exiting to userspace because of h/w breakpoint, watchpoint
+	 * (read, write or both) and software breakpoint.
+	 */
+	__u32 status;
+	__u32 reserved;
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+struct kvm_guest_debug_arch {
+	struct {
+		/* H/W breakpoint/watchpoint address */
+		__u64 addr;
+		/*
+		 * Type denotes h/w breakpoint, read watchpoint, write
+		 * watchpoint or watchpoint (both read and write).
+		 */
+		__u32 type;
+		__u32 reserved;
+	} bp[16];
+};
+
+/* Debug related defines */
+/*
+ * kvm_guest_debug->control is a 32 bit field. The lower 16 bits are generic
+ * and upper 16 bits are architecture specific. Architecture specific defines
+ * that ioctl is for setting hardware breakpoint or software breakpoint.
+ */
+#define KVM_GUESTDBG_USE_SW_BP		0x00010000
+#define KVM_GUESTDBG_USE_HW_BP		0x00020000
+
+/* definition of registers in kvm_run */
+struct kvm_sync_regs {
+};
+
+#define KVM_INTERRUPT_SET	-1U
+#define KVM_INTERRUPT_UNSET	-2U
+#define KVM_INTERRUPT_SET_LEVEL	-3U
+
+#define KVM_CPU_440		1
+#define KVM_CPU_E500V2		2
+#define KVM_CPU_3S_32		3
+#define KVM_CPU_3S_64		4
+#define KVM_CPU_E500MC		5
+
+/* for KVM_CAP_SPAPR_TCE */
+struct kvm_create_spapr_tce {
+	__u64 liobn;
+	__u32 window_size;
+};
+
+/* for KVM_CAP_SPAPR_TCE_64 */
+struct kvm_create_spapr_tce_64 {
+	__u64 liobn;
+	__u32 page_shift;
+	__u32 flags;
+	__u64 offset;	/* in pages */
+	__u64 size;	/* in pages */
+};
+
+/* for KVM_ALLOCATE_RMA */
+struct kvm_allocate_rma {
+	__u64 rma_size;
+};
+
+/* for KVM_CAP_PPC_RTAS */
+struct kvm_rtas_token_args {
+	char name[120];
+	__u64 token;	/* Use a token of 0 to undefine a mapping */
+};
+
+struct kvm_book3e_206_tlb_entry {
+	__u32 mas8;
+	__u32 mas1;
+	__u64 mas2;
+	__u64 mas7_3;
+};
+
+struct kvm_book3e_206_tlb_params {
+	/*
+	 * For mmu types KVM_MMU_FSL_BOOKE_NOHV and KVM_MMU_FSL_BOOKE_HV:
+	 *
+	 * - The number of ways of TLB0 must be a power of two between 2 and
+	 *   16.
+	 * - TLB1 must be fully associative.
+	 * - The size of TLB0 must be a multiple of the number of ways, and
+	 *   the number of sets must be a power of two.
+	 * - The size of TLB1 may not exceed 64 entries.
+	 * - TLB0 supports 4 KiB pages.
+	 * - The page sizes supported by TLB1 are as indicated by
+	 *   TLB1CFG (if MMUCFG[MAVN] = 0) or TLB1PS (if MMUCFG[MAVN] = 1)
+	 *   as returned by KVM_GET_SREGS.
+	 * - TLB2 and TLB3 are reserved, and their entries in tlb_sizes[]
+	 *   and tlb_ways[] must be zero.
+	 *
+	 * tlb_ways[n] = tlb_sizes[n] means the array is fully associative.
+	 *
+	 * KVM will adjust TLBnCFG based on the sizes configured here,
+	 * though arrays greater than 2048 entries will have TLBnCFG[NENTRY]
+	 * set to zero.
+	 */
+	__u32 tlb_sizes[4];
+	__u32 tlb_ways[4];
+	__u32 reserved[8];
+};
+
+/* For KVM_PPC_GET_HTAB_FD */
+struct kvm_get_htab_fd {
+	__u64	flags;
+	__u64	start_index;
+	__u64	reserved[2];
+};
+
+/* Values for kvm_get_htab_fd.flags */
+#define KVM_GET_HTAB_BOLTED_ONLY	((__u64)0x1)
+#define KVM_GET_HTAB_WRITE		((__u64)0x2)
+
+/*
+ * Data read on the file descriptor is formatted as a series of
+ * records, each consisting of a header followed by a series of
+ * `n_valid' HPTEs (16 bytes each), which are all valid.  Following
+ * those valid HPTEs there are `n_invalid' invalid HPTEs, which
+ * are not represented explicitly in the stream.  The same format
+ * is used for writing.
+ */
+struct kvm_get_htab_header {
+	__u32	index;
+	__u16	n_valid;
+	__u16	n_invalid;
+};
+
+/* For KVM_PPC_CONFIGURE_V3_MMU */
+struct kvm_ppc_mmuv3_cfg {
+	__u64	flags;
+	__u64	process_table;	/* second doubleword of partition table entry */
+};
+
+/* Flag values for KVM_PPC_CONFIGURE_V3_MMU */
+#define KVM_PPC_MMUV3_RADIX	1	/* 1 = radix mode, 0 = HPT */
+#define KVM_PPC_MMUV3_GTSE	2	/* global translation shootdown enb. */
+
+/* For KVM_PPC_GET_RMMU_INFO */
+struct kvm_ppc_rmmu_info {
+	struct kvm_ppc_radix_geom {
+		__u8	page_shift;
+		__u8	level_bits[4];
+		__u8	pad[3];
+	}	geometries[8];
+	__u32	ap_encodings[8];
+};
+
+/* For KVM_PPC_GET_CPU_CHAR */
+struct kvm_ppc_cpu_char {
+	__u64	character;		/* characteristics of the CPU */
+	__u64	behaviour;		/* recommended software behaviour */
+	__u64	character_mask;		/* valid bits in character */
+	__u64	behaviour_mask;		/* valid bits in behaviour */
+};
+
+/*
+ * Values for character and character_mask.
+ * These are identical to the values used by H_GET_CPU_CHARACTERISTICS.
+ */
+#define KVM_PPC_CPU_CHAR_SPEC_BAR_ORI31		(1ULL << 63)
+#define KVM_PPC_CPU_CHAR_BCCTRL_SERIALISED	(1ULL << 62)
+#define KVM_PPC_CPU_CHAR_L1D_FLUSH_ORI30	(1ULL << 61)
+#define KVM_PPC_CPU_CHAR_L1D_FLUSH_TRIG2	(1ULL << 60)
+#define KVM_PPC_CPU_CHAR_L1D_THREAD_PRIV	(1ULL << 59)
+#define KVM_PPC_CPU_CHAR_BR_HINT_HONOURED	(1ULL << 58)
+#define KVM_PPC_CPU_CHAR_MTTRIG_THR_RECONF	(1ULL << 57)
+#define KVM_PPC_CPU_CHAR_COUNT_CACHE_DIS	(1ULL << 56)
+#define KVM_PPC_CPU_CHAR_BCCTR_FLUSH_ASSIST	(1ull << 54)
+
+#define KVM_PPC_CPU_BEHAV_FAVOUR_SECURITY	(1ULL << 63)
+#define KVM_PPC_CPU_BEHAV_L1D_FLUSH_PR		(1ULL << 62)
+#define KVM_PPC_CPU_BEHAV_BNDS_CHK_SPEC_BAR	(1ULL << 61)
+#define KVM_PPC_CPU_BEHAV_FLUSH_COUNT_CACHE	(1ull << 58)
+
+/* Per-vcpu XICS interrupt controller state */
+#define KVM_REG_PPC_ICP_STATE	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x8c)
+
+#define  KVM_REG_PPC_ICP_CPPR_SHIFT	56	/* current proc priority */
+#define  KVM_REG_PPC_ICP_CPPR_MASK	0xff
+#define  KVM_REG_PPC_ICP_XISR_SHIFT	32	/* interrupt status field */
+#define  KVM_REG_PPC_ICP_XISR_MASK	0xffffff
+#define  KVM_REG_PPC_ICP_MFRR_SHIFT	24	/* pending IPI priority */
+#define  KVM_REG_PPC_ICP_MFRR_MASK	0xff
+#define  KVM_REG_PPC_ICP_PPRI_SHIFT	16	/* pending irq priority */
+#define  KVM_REG_PPC_ICP_PPRI_MASK	0xff
+
+#define KVM_REG_PPC_VP_STATE	(KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x8d)
+
+/* Device control API: PPC-specific devices */
+#define KVM_DEV_MPIC_GRP_MISC		1
+#define   KVM_DEV_MPIC_BASE_ADDR	0	/* 64-bit */
+
+#define KVM_DEV_MPIC_GRP_REGISTER	2	/* 32-bit */
+#define KVM_DEV_MPIC_GRP_IRQ_ACTIVE	3	/* 32-bit */
+
+/* One-Reg API: PPC-specific registers */
+#define KVM_REG_PPC_HIOR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x1)
+#define KVM_REG_PPC_IAC1	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x2)
+#define KVM_REG_PPC_IAC2	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x3)
+#define KVM_REG_PPC_IAC3	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x4)
+#define KVM_REG_PPC_IAC4	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x5)
+#define KVM_REG_PPC_DAC1	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x6)
+#define KVM_REG_PPC_DAC2	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x7)
+#define KVM_REG_PPC_DABR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x8)
+#define KVM_REG_PPC_DSCR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x9)
+#define KVM_REG_PPC_PURR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xa)
+#define KVM_REG_PPC_SPURR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb)
+#define KVM_REG_PPC_DAR		(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc)
+#define KVM_REG_PPC_DSISR	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xd)
+#define KVM_REG_PPC_AMR		(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xe)
+#define KVM_REG_PPC_UAMOR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xf)
+
+#define KVM_REG_PPC_MMCR0	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x10)
+#define KVM_REG_PPC_MMCR1	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x11)
+#define KVM_REG_PPC_MMCRA	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x12)
+#define KVM_REG_PPC_MMCR2	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x13)
+#define KVM_REG_PPC_MMCRS	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x14)
+#define KVM_REG_PPC_SIAR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x15)
+#define KVM_REG_PPC_SDAR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x16)
+#define KVM_REG_PPC_SIER	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x17)
+
+#define KVM_REG_PPC_PMC1	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x18)
+#define KVM_REG_PPC_PMC2	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x19)
+#define KVM_REG_PPC_PMC3	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1a)
+#define KVM_REG_PPC_PMC4	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1b)
+#define KVM_REG_PPC_PMC5	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1c)
+#define KVM_REG_PPC_PMC6	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1d)
+#define KVM_REG_PPC_PMC7	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1e)
+#define KVM_REG_PPC_PMC8	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1f)
+
+/* 32 floating-point registers */
+#define KVM_REG_PPC_FPR0	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x20)
+#define KVM_REG_PPC_FPR(n)	(KVM_REG_PPC_FPR0 + (n))
+#define KVM_REG_PPC_FPR31	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x3f)
+
+/* 32 VMX/Altivec vector registers */
+#define KVM_REG_PPC_VR0		(KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x40)
+#define KVM_REG_PPC_VR(n)	(KVM_REG_PPC_VR0 + (n))
+#define KVM_REG_PPC_VR31	(KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x5f)
+
+/* 32 double-width FP registers for VSX */
+/* High-order halves overlap with FP regs */
+#define KVM_REG_PPC_VSR0	(KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x60)
+#define KVM_REG_PPC_VSR(n)	(KVM_REG_PPC_VSR0 + (n))
+#define KVM_REG_PPC_VSR31	(KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x7f)
+
+/* FP and vector status/control registers */
+#define KVM_REG_PPC_FPSCR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x80)
+/*
+ * VSCR register is documented as a 32-bit register in the ISA, but it can
+ * only be accesses via a vector register. Expose VSCR as a 32-bit register
+ * even though the kernel represents it as a 128-bit vector.
+ */
+#define KVM_REG_PPC_VSCR	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x81)
+
+/* Virtual processor areas */
+/* For SLB & DTL, address in high (first) half, length in low half */
+#define KVM_REG_PPC_VPA_ADDR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x82)
+#define KVM_REG_PPC_VPA_SLB	(KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x83)
+#define KVM_REG_PPC_VPA_DTL	(KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x84)
+
+#define KVM_REG_PPC_EPCR	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x85)
+#define KVM_REG_PPC_EPR		(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x86)
+
+/* Timer Status Register OR/CLEAR interface */
+#define KVM_REG_PPC_OR_TSR	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x87)
+#define KVM_REG_PPC_CLEAR_TSR	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x88)
+#define KVM_REG_PPC_TCR		(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x89)
+#define KVM_REG_PPC_TSR		(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x8a)
+
+/* Debugging: Special instruction for software breakpoint */
+#define KVM_REG_PPC_DEBUG_INST	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x8b)
+
+/* MMU registers */
+#define KVM_REG_PPC_MAS0	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x8c)
+#define KVM_REG_PPC_MAS1	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x8d)
+#define KVM_REG_PPC_MAS2	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x8e)
+#define KVM_REG_PPC_MAS7_3	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x8f)
+#define KVM_REG_PPC_MAS4	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x90)
+#define KVM_REG_PPC_MAS6	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x91)
+#define KVM_REG_PPC_MMUCFG	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x92)
+/*
+ * TLBnCFG fields TLBnCFG_N_ENTRY and TLBnCFG_ASSOC can be changed only using
+ * KVM_CAP_SW_TLB ioctl
+ */
+#define KVM_REG_PPC_TLB0CFG	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x93)
+#define KVM_REG_PPC_TLB1CFG	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x94)
+#define KVM_REG_PPC_TLB2CFG	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x95)
+#define KVM_REG_PPC_TLB3CFG	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x96)
+#define KVM_REG_PPC_TLB0PS	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x97)
+#define KVM_REG_PPC_TLB1PS	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x98)
+#define KVM_REG_PPC_TLB2PS	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x99)
+#define KVM_REG_PPC_TLB3PS	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x9a)
+#define KVM_REG_PPC_EPTCFG	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x9b)
+
+/* Timebase offset */
+#define KVM_REG_PPC_TB_OFFSET	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x9c)
+
+/* POWER8 registers */
+#define KVM_REG_PPC_SPMC1	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x9d)
+#define KVM_REG_PPC_SPMC2	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x9e)
+#define KVM_REG_PPC_IAMR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x9f)
+#define KVM_REG_PPC_TFHAR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xa0)
+#define KVM_REG_PPC_TFIAR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xa1)
+#define KVM_REG_PPC_TEXASR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xa2)
+#define KVM_REG_PPC_FSCR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xa3)
+#define KVM_REG_PPC_PSPB	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xa4)
+#define KVM_REG_PPC_EBBHR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xa5)
+#define KVM_REG_PPC_EBBRR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xa6)
+#define KVM_REG_PPC_BESCR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xa7)
+#define KVM_REG_PPC_TAR		(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xa8)
+#define KVM_REG_PPC_DPDES	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xa9)
+#define KVM_REG_PPC_DAWR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xaa)
+#define KVM_REG_PPC_DAWRX	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xab)
+#define KVM_REG_PPC_CIABR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xac)
+#define KVM_REG_PPC_IC		(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xad)
+#define KVM_REG_PPC_VTB		(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xae)
+#define KVM_REG_PPC_CSIGR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xaf)
+#define KVM_REG_PPC_TACR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb0)
+#define KVM_REG_PPC_TCSCR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb1)
+#define KVM_REG_PPC_PID		(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb2)
+#define KVM_REG_PPC_ACOP	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb3)
+
+#define KVM_REG_PPC_VRSAVE	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xb4)
+#define KVM_REG_PPC_LPCR	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xb5)
+#define KVM_REG_PPC_LPCR_64	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb5)
+#define KVM_REG_PPC_PPR		(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb6)
+
+/* Architecture compatibility level */
+#define KVM_REG_PPC_ARCH_COMPAT	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xb7)
+
+#define KVM_REG_PPC_DABRX	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xb8)
+#define KVM_REG_PPC_WORT	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb9)
+#define KVM_REG_PPC_SPRG9	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xba)
+#define KVM_REG_PPC_DBSR	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xbb)
+
+/* POWER9 registers */
+#define KVM_REG_PPC_TIDR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbc)
+#define KVM_REG_PPC_PSSCR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbd)
+
+#define KVM_REG_PPC_DEC_EXPIRY	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbe)
+#define KVM_REG_PPC_ONLINE	(KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xbf)
+#define KVM_REG_PPC_PTCR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc0)
+
+/* POWER10 registers */
+#define KVM_REG_PPC_MMCR3	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc1)
+#define KVM_REG_PPC_SIER2	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc2)
+#define KVM_REG_PPC_SIER3	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc3)
+#define KVM_REG_PPC_DAWR1	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc4)
+#define KVM_REG_PPC_DAWRX1	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc5)
+
+/* Transactional Memory checkpointed state:
+ * This is all GPRs, all VSX regs and a subset of SPRs
+ */
+#define KVM_REG_PPC_TM		(KVM_REG_PPC | 0x80000000)
+/* TM GPRs */
+#define KVM_REG_PPC_TM_GPR0	(KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0)
+#define KVM_REG_PPC_TM_GPR(n)	(KVM_REG_PPC_TM_GPR0 + (n))
+#define KVM_REG_PPC_TM_GPR31	(KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x1f)
+/* TM VSX */
+#define KVM_REG_PPC_TM_VSR0	(KVM_REG_PPC_TM | KVM_REG_SIZE_U128 | 0x20)
+#define KVM_REG_PPC_TM_VSR(n)	(KVM_REG_PPC_TM_VSR0 + (n))
+#define KVM_REG_PPC_TM_VSR63	(KVM_REG_PPC_TM | KVM_REG_SIZE_U128 | 0x5f)
+/* TM SPRS */
+#define KVM_REG_PPC_TM_CR	(KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x60)
+#define KVM_REG_PPC_TM_LR	(KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x61)
+#define KVM_REG_PPC_TM_CTR	(KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x62)
+#define KVM_REG_PPC_TM_FPSCR	(KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x63)
+#define KVM_REG_PPC_TM_AMR	(KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x64)
+#define KVM_REG_PPC_TM_PPR	(KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x65)
+#define KVM_REG_PPC_TM_VRSAVE	(KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x66)
+#define KVM_REG_PPC_TM_VSCR	(KVM_REG_PPC_TM | KVM_REG_SIZE_U32 | 0x67)
+#define KVM_REG_PPC_TM_DSCR	(KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x68)
+#define KVM_REG_PPC_TM_TAR	(KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x69)
+#define KVM_REG_PPC_TM_XER	(KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x6a)
+
+/* PPC64 eXternal Interrupt Controller Specification */
+#define KVM_DEV_XICS_GRP_SOURCES	1	/* 64-bit source attributes */
+#define KVM_DEV_XICS_GRP_CTRL		2
+#define   KVM_DEV_XICS_NR_SERVERS	1
+
+/* Layout of 64-bit source attribute values */
+#define  KVM_XICS_DESTINATION_SHIFT	0
+#define  KVM_XICS_DESTINATION_MASK	0xffffffffULL
+#define  KVM_XICS_PRIORITY_SHIFT	32
+#define  KVM_XICS_PRIORITY_MASK		0xff
+#define  KVM_XICS_LEVEL_SENSITIVE	(1ULL << 40)
+#define  KVM_XICS_MASKED		(1ULL << 41)
+#define  KVM_XICS_PENDING		(1ULL << 42)
+#define  KVM_XICS_PRESENTED		(1ULL << 43)
+#define  KVM_XICS_QUEUED		(1ULL << 44)
+
+/* POWER9 XIVE Native Interrupt Controller */
+#define KVM_DEV_XIVE_GRP_CTRL		1
+#define   KVM_DEV_XIVE_RESET		1
+#define   KVM_DEV_XIVE_EQ_SYNC		2
+#define   KVM_DEV_XIVE_NR_SERVERS	3
+#define KVM_DEV_XIVE_GRP_SOURCE		2	/* 64-bit source identifier */
+#define KVM_DEV_XIVE_GRP_SOURCE_CONFIG	3	/* 64-bit source identifier */
+#define KVM_DEV_XIVE_GRP_EQ_CONFIG	4	/* 64-bit EQ identifier */
+#define KVM_DEV_XIVE_GRP_SOURCE_SYNC	5       /* 64-bit source identifier */
+
+/* Layout of 64-bit XIVE source attribute values */
+#define KVM_XIVE_LEVEL_SENSITIVE	(1ULL << 0)
+#define KVM_XIVE_LEVEL_ASSERTED		(1ULL << 1)
+
+/* Layout of 64-bit XIVE source configuration attribute values */
+#define KVM_XIVE_SOURCE_PRIORITY_SHIFT	0
+#define KVM_XIVE_SOURCE_PRIORITY_MASK	0x7
+#define KVM_XIVE_SOURCE_SERVER_SHIFT	3
+#define KVM_XIVE_SOURCE_SERVER_MASK	0xfffffff8ULL
+#define KVM_XIVE_SOURCE_MASKED_SHIFT	32
+#define KVM_XIVE_SOURCE_MASKED_MASK	0x100000000ULL
+#define KVM_XIVE_SOURCE_EISN_SHIFT	33
+#define KVM_XIVE_SOURCE_EISN_MASK	0xfffffffe00000000ULL
+
+/* Layout of 64-bit EQ identifier */
+#define KVM_XIVE_EQ_PRIORITY_SHIFT	0
+#define KVM_XIVE_EQ_PRIORITY_MASK	0x7
+#define KVM_XIVE_EQ_SERVER_SHIFT	3
+#define KVM_XIVE_EQ_SERVER_MASK		0xfffffff8ULL
+
+/* Layout of EQ configuration values (64 bytes) */
+struct kvm_ppc_xive_eq {
+	__u32 flags;
+	__u32 qshift;
+	__u64 qaddr;
+	__u32 qtoggle;
+	__u32 qindex;
+	__u8  pad[40];
+};
+
+#define KVM_XIVE_EQ_ALWAYS_NOTIFY	0x00000001
+
+#define KVM_XIVE_TIMA_PAGE_OFFSET	0
+#define KVM_XIVE_ESB_PAGE_OFFSET	4
+
+#endif /* __LINUX_KVM_POWERPC_H */