Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 164 insertions, 0 deletions

diff --git a/arch/powerpc/mm/book3s64/hugetlbpage.c b/arch/powerpc/mm/book3s64/hugetlbpage.c
new file mode 100644
index 000000000..3bc0eb21b
--- /dev/null
+++ b/arch/powerpc/mm/book3s64/hugetlbpage.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PPC64 Huge TLB Page Support for hash based MMUs (POWER4 and later)
+ *
+ * Copyright (C) 2003 David Gibson, IBM Corporation.
+ *
+ * Based on the IA-32 version:
+ * Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com>
+ */
+
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <asm/cacheflush.h>
+#include <asm/machdep.h>
+
+unsigned int hpage_shift;
+EXPORT_SYMBOL(hpage_shift);
+
+#ifdef CONFIG_PPC_64S_HASH_MMU
+int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
+		     pte_t *ptep, unsigned long trap, unsigned long flags,
+		     int ssize, unsigned int shift, unsigned int mmu_psize)
+{
+	real_pte_t rpte;
+	unsigned long vpn;
+	unsigned long old_pte, new_pte;
+	unsigned long rflags, pa;
+	long slot, offset;
+
+	BUG_ON(shift != mmu_psize_defs[mmu_psize].shift);
+
+	/* Search the Linux page table for a match with va */
+	vpn = hpt_vpn(ea, vsid, ssize);
+
+	/*
+	 * At this point, we have a pte (old_pte) which can be used to build
+	 * or update an HPTE. There are 2 cases:
+	 *
+	 * 1. There is a valid (present) pte with no associated HPTE (this is
+	 *	the most common case)
+	 * 2. There is a valid (present) pte with an associated HPTE. The
+	 *	current values of the pp bits in the HPTE prevent access
+	 *	because we are doing software DIRTY bit management and the
+	 *	page is currently not DIRTY.
+	 */
+
+
+	do {
+		old_pte = pte_val(*ptep);
+		/* If PTE busy, retry the access */
+		if (unlikely(old_pte & H_PAGE_BUSY))
+			return 0;
+		/* If PTE permissions don't match, take page fault */
+		if (unlikely(!check_pte_access(access, old_pte)))
+			return 1;
+
+		/*
+		 * Try to lock the PTE, add ACCESSED and DIRTY if it was
+		 * a write access
+		 */
+		new_pte = old_pte | H_PAGE_BUSY | _PAGE_ACCESSED;
+		if (access & _PAGE_WRITE)
+			new_pte |= _PAGE_DIRTY;
+	} while(!pte_xchg(ptep, __pte(old_pte), __pte(new_pte)));
+
+	/* Make sure this is a hugetlb entry */
+	if (old_pte & (H_PAGE_THP_HUGE | _PAGE_DEVMAP))
+		return 0;
+
+	rflags = htab_convert_pte_flags(new_pte, flags);
+	if (unlikely(mmu_psize == MMU_PAGE_16G))
+		offset = PTRS_PER_PUD;
+	else
+		offset = PTRS_PER_PMD;
+	rpte = __real_pte(__pte(old_pte), ptep, offset);
+
+	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+		/*
+		 * No CPU has hugepages but lacks no execute, so we
+		 * don't need to worry about that case
+		 */
+		rflags = hash_page_do_lazy_icache(rflags, __pte(old_pte), trap);
+
+	/* Check if pte already has an hpte (case 2) */
+	if (unlikely(old_pte & H_PAGE_HASHPTE)) {
+		/* There MIGHT be an HPTE for this pte */
+		unsigned long gslot;
+
+		gslot = pte_get_hash_gslot(vpn, shift, ssize, rpte, 0);
+		if (mmu_hash_ops.hpte_updatepp(gslot, rflags, vpn, mmu_psize,
+					       mmu_psize, ssize, flags) == -1)
+			old_pte &= ~_PAGE_HPTEFLAGS;
+	}
+
+	if (likely(!(old_pte & H_PAGE_HASHPTE))) {
+		unsigned long hash = hpt_hash(vpn, shift, ssize);
+
+		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
+
+		/* clear HPTE slot informations in new PTE */
+		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | H_PAGE_HASHPTE;
+
+		slot = hpte_insert_repeating(hash, vpn, pa, rflags, 0,
+					     mmu_psize, ssize);
+
+		/*
+		 * Hypervisor failure. Restore old pte and return -1
+		 * similar to __hash_page_*
+		 */
+		if (unlikely(slot == -2)) {
+			*ptep = __pte(old_pte);
+			hash_failure_debug(ea, access, vsid, trap, ssize,
+					   mmu_psize, mmu_psize, old_pte);
+			return -1;
+		}
+
+		new_pte |= pte_set_hidx(ptep, rpte, 0, slot, offset);
+	}
+
+	/*
+	 * No need to use ldarx/stdcx here
+	 */
+	*ptep = __pte(new_pte & ~H_PAGE_BUSY);
+	return 0;
+}
+#endif
+
+pte_t huge_ptep_modify_prot_start(struct vm_area_struct *vma,
+				  unsigned long addr, pte_t *ptep)
+{
+	unsigned long pte_val;
+	/*
+	 * Clear the _PAGE_PRESENT so that no hardware parallel update is
+	 * possible. Also keep the pte_present true so that we don't take
+	 * wrong fault.
+	 */
+	pte_val = pte_update(vma->vm_mm, addr, ptep,
+			     _PAGE_PRESENT, _PAGE_INVALID, 1);
+
+	return __pte(pte_val);
+}
+
+void huge_ptep_modify_prot_commit(struct vm_area_struct *vma, unsigned long addr,
+				  pte_t *ptep, pte_t old_pte, pte_t pte)
+{
+
+	if (radix_enabled())
+		return radix__huge_ptep_modify_prot_commit(vma, addr, ptep,
+							   old_pte, pte);
+	set_huge_pte_at(vma->vm_mm, addr, ptep, pte);
+}
+
+void __init hugetlbpage_init_defaultsize(void)
+{
+	/* Set default large page size. Currently, we pick 16M or 1M
+	 * depending on what is available
+	 */
+	if (mmu_psize_defs[MMU_PAGE_16M].shift)
+		hpage_shift = mmu_psize_defs[MMU_PAGE_16M].shift;
+	else if (mmu_psize_defs[MMU_PAGE_1M].shift)
+		hpage_shift = mmu_psize_defs[MMU_PAGE_1M].shift;
+	else if (mmu_psize_defs[MMU_PAGE_2M].shift)
+		hpage_shift = mmu_psize_defs[MMU_PAGE_2M].shift;
+}