Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 272 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/44x/fsp2.h b/arch/powerpc/platforms/44x/fsp2.h
new file mode 100644
index 000000000..9e1d52754
--- /dev/null
+++ b/arch/powerpc/platforms/44x/fsp2.h
@@ -0,0 +1,272 @@
+#ifndef _ASM_POWERPC_FSP_DCR_H_
+#define _ASM_POWERPC_FSP_DCR_H_
+#ifdef __KERNEL__
+#include <asm/dcr.h>
+
+#define DCRN_CMU_ADDR		0x00C	/* Chip management unic addr */
+#define DCRN_CMU_DATA		0x00D	/* Chip management unic data */
+
+/* PLB4 Arbiter */
+#define DCRN_PLB4_PCBI		0x010	/* PLB Crossbar ID/Rev Register */
+#define DCRN_PLB4_P0ACR		0x011	/* PLB0 Arbiter Control Register */
+#define DCRN_PLB4_P0ESRL	0x012	/* PLB0 Error Status Register Low */
+#define DCRN_PLB4_P0ESRH	0x013	/* PLB0 Error Status Register High */
+#define DCRN_PLB4_P0EARL	0x014	/* PLB0 Error Address Register Low */
+#define DCRN_PLB4_P0EARH	0x015	/* PLB0 Error Address Register High */
+#define DCRN_PLB4_P0ESRLS	0x016	/* PLB0 Error Status Register Low Set*/
+#define DCRN_PLB4_P0ESRHS	0x017	/* PLB0 Error Status Register High */
+#define DCRN_PLB4_PCBC		0x018	/* PLB Crossbar Control Register */
+#define DCRN_PLB4_P1ACR		0x019	/* PLB1 Arbiter Control Register */
+#define DCRN_PLB4_P1ESRL	0x01A	/* PLB1 Error Status Register Low */
+#define DCRN_PLB4_P1ESRH	0x01B	/* PLB1 Error Status Register High */
+#define DCRN_PLB4_P1EARL	0x01C	/* PLB1 Error Address Register Low */
+#define DCRN_PLB4_P1EARH	0x01D	/* PLB1 Error Address Register High */
+#define DCRN_PLB4_P1ESRLS	0x01E	/* PLB1 Error Status Register Low Set*/
+#define DCRN_PLB4_P1ESRHS	0x01F	/*PLB1 Error Status Register High Set*/
+
+/* PLB4/OPB bridge 0, 1, 2, 3 */
+#define DCRN_PLB4OPB0_BASE	0x020
+#define DCRN_PLB4OPB1_BASE	0x030
+#define DCRN_PLB4OPB2_BASE	0x040
+#define DCRN_PLB4OPB3_BASE	0x050
+
+#define PLB4OPB_GESR0		0x0	/* Error status 0: Master Dev 0-3 */
+#define PLB4OPB_GEAR		0x2	/* Error Address Register */
+#define PLB4OPB_GEARU		0x3	/* Error Upper Address Register */
+#define PLB4OPB_GESR1		0x4	/* Error Status 1: Master Dev 4-7 */
+#define PLB4OPB_GESR2		0xC	/* Error Status 2: Master Dev 8-11 */
+
+/* PLB4-to-AHB Bridge */
+#define DCRN_PLB4AHB_BASE	0x400
+#define DCRN_PLB4AHB_SEUAR	(DCRN_PLB4AHB_BASE + 1)
+#define DCRN_PLB4AHB_SELAR	(DCRN_PLB4AHB_BASE + 2)
+#define DCRN_PLB4AHB_ESR	(DCRN_PLB4AHB_BASE + 3)
+#define DCRN_AHBPLB4_ESR	(DCRN_PLB4AHB_BASE + 8)
+#define DCRN_AHBPLB4_EAR	(DCRN_PLB4AHB_BASE + 9)
+
+/* PLB6 Controller */
+#define DCRN_PLB6_BASE		0x11111300
+#define DCRN_PLB6_CR0		(DCRN_PLB6_BASE)
+#define DCRN_PLB6_ERR		(DCRN_PLB6_BASE + 0x0B)
+#define DCRN_PLB6_HD		(DCRN_PLB6_BASE + 0x0E)
+#define DCRN_PLB6_SHD		(DCRN_PLB6_BASE + 0x10)
+
+/* PLB4-to-PLB6 Bridge */
+#define DCRN_PLB4PLB6_BASE	0x11111320
+#define DCRN_PLB4PLB6_ESR	(DCRN_PLB4PLB6_BASE + 1)
+#define DCRN_PLB4PLB6_EARH	(DCRN_PLB4PLB6_BASE + 3)
+#define DCRN_PLB4PLB6_EARL	(DCRN_PLB4PLB6_BASE + 4)
+
+/* PLB6-to-PLB4 Bridge */
+#define DCRN_PLB6PLB4_BASE	0x11111350
+#define DCRN_PLB6PLB4_ESR	(DCRN_PLB6PLB4_BASE + 1)
+#define DCRN_PLB6PLB4_EARH	(DCRN_PLB6PLB4_BASE + 3)
+#define DCRN_PLB6PLB4_EARL	(DCRN_PLB6PLB4_BASE + 4)
+
+/* PLB6-to-MCIF Bridge */
+#define DCRN_PLB6MCIF_BASE	0x11111380
+#define DCRN_PLB6MCIF_BESR0	(DCRN_PLB6MCIF_BASE + 0)
+#define DCRN_PLB6MCIF_BESR1	(DCRN_PLB6MCIF_BASE + 1)
+#define DCRN_PLB6MCIF_BEARL	(DCRN_PLB6MCIF_BASE + 2)
+#define DCRN_PLB6MCIF_BEARH	(DCRN_PLB6MCIF_BASE + 3)
+
+/* Configuration Logic Registers */
+#define DCRN_CONF_BASE		0x11111400
+#define DCRN_CONF_FIR_RWC	(DCRN_CONF_BASE + 0x3A)
+#define DCRN_CONF_EIR_RS	(DCRN_CONF_BASE + 0x3E)
+#define DCRN_CONF_RPERR0	(DCRN_CONF_BASE + 0x4D)
+#define DCRN_CONF_RPERR1	(DCRN_CONF_BASE + 0x4E)
+
+#define DCRN_L2CDCRAI		0x11111100
+#define DCRN_L2CDCRDI		0x11111104
+/* L2 indirect addresses */
+#define L2MCK		0x120
+#define L2MCKEN		0x130
+#define L2INT		0x150
+#define L2INTEN		0x160
+#define L2LOG0		0x180
+#define L2LOG1		0x184
+#define L2LOG2		0x188
+#define L2LOG3		0x18C
+#define L2LOG4		0x190
+#define L2LOG5		0x194
+#define L2PLBSTAT0	0x300
+#define L2PLBSTAT1	0x304
+#define L2PLBMCKEN0	0x330
+#define L2PLBMCKEN1	0x334
+#define L2PLBINTEN0	0x360
+#define L2PLBINTEN1	0x364
+#define L2ARRSTAT0	0x500
+#define L2ARRSTAT1	0x504
+#define L2ARRSTAT2	0x508
+#define L2ARRMCKEN0	0x530
+#define L2ARRMCKEN1	0x534
+#define L2ARRMCKEN2	0x538
+#define L2ARRINTEN0	0x560
+#define L2ARRINTEN1	0x564
+#define L2ARRINTEN2	0x568
+#define L2CPUSTAT	0x700
+#define L2CPUMCKEN	0x730
+#define L2CPUINTEN	0x760
+#define L2RACSTAT0	0x900
+#define L2RACMCKEN0	0x930
+#define L2RACINTEN0	0x960
+#define L2WACSTAT0	0xD00
+#define L2WACSTAT1	0xD04
+#define L2WACSTAT2	0xD08
+#define L2WACMCKEN0	0xD30
+#define L2WACMCKEN1	0xD34
+#define L2WACMCKEN2	0xD38
+#define L2WACINTEN0	0xD60
+#define L2WACINTEN1	0xD64
+#define L2WACINTEN2	0xD68
+#define L2WDFSTAT	0xF00
+#define L2WDFMCKEN	0xF30
+#define L2WDFINTEN	0xF60
+
+/* DDR3/4 Memory Controller */
+#define DCRN_DDR34_BASE			0x11120000
+#define DCRN_DDR34_MCSTAT		0x10
+#define DCRN_DDR34_MCOPT1		0x20
+#define DCRN_DDR34_MCOPT2		0x21
+#define DCRN_DDR34_PHYSTAT		0x32
+#define DCRN_DDR34_CFGR0		0x40
+#define DCRN_DDR34_CFGR1		0x41
+#define DCRN_DDR34_CFGR2		0x42
+#define DCRN_DDR34_CFGR3		0x43
+#define DCRN_DDR34_SCRUB_CNTL		0xAA
+#define DCRN_DDR34_SCRUB_INT		0xAB
+#define DCRN_DDR34_SCRUB_START_ADDR	0xB0
+#define DCRN_DDR34_SCRUB_END_ADDR	0xD0
+#define DCRN_DDR34_ECCERR_ADDR_PORT0	0xE0
+#define DCRN_DDR34_ECCERR_ADDR_PORT1	0xE1
+#define DCRN_DDR34_ECCERR_ADDR_PORT2	0xE2
+#define DCRN_DDR34_ECCERR_ADDR_PORT3	0xE3
+#define DCRN_DDR34_ECCERR_COUNT_PORT0	0xE4
+#define DCRN_DDR34_ECCERR_COUNT_PORT1	0xE5
+#define DCRN_DDR34_ECCERR_COUNT_PORT2	0xE6
+#define DCRN_DDR34_ECCERR_COUNT_PORT3	0xE7
+#define DCRN_DDR34_ECCERR_PORT0		0xF0
+#define DCRN_DDR34_ECCERR_PORT1		0xF2
+#define DCRN_DDR34_ECCERR_PORT2		0xF4
+#define DCRN_DDR34_ECCERR_PORT3		0xF6
+#define DCRN_DDR34_ECC_CHECK_PORT0	0xF8
+#define DCRN_DDR34_ECC_CHECK_PORT1	0xF9
+#define DCRN_DDR34_ECC_CHECK_PORT2	0xF9
+#define DCRN_DDR34_ECC_CHECK_PORT3	0xFB
+
+#define DDR34_SCRUB_CNTL_STOP		0x00000000
+#define DDR34_SCRUB_CNTL_SCRUB		0x80000000
+#define DDR34_SCRUB_CNTL_UE_STOP	0x20000000
+#define DDR34_SCRUB_CNTL_CE_STOP	0x10000000
+#define DDR34_SCRUB_CNTL_RANK_EN	0x00008000
+
+/* PLB-Attached DDR3/4 Core Wrapper */
+#define DCRN_CW_BASE			0x11111800
+#define DCRN_CW_MCER0			0x00
+#define DCRN_CW_MCER1			0x01
+#define DCRN_CW_MCER_AND0		0x02
+#define DCRN_CW_MCER_AND1		0x03
+#define DCRN_CW_MCER_OR0		0x04
+#define DCRN_CW_MCER_OR1		0x05
+#define DCRN_CW_MCER_MASK0		0x06
+#define DCRN_CW_MCER_MASK1		0x07
+#define DCRN_CW_MCER_MASK_AND0		0x08
+#define DCRN_CW_MCER_MASK_AND1		0x09
+#define DCRN_CW_MCER_MASK_OR0		0x0A
+#define DCRN_CW_MCER_MASK_OR1		0x0B
+#define DCRN_CW_MCER_ACTION0		0x0C
+#define DCRN_CW_MCER_ACTION1		0x0D
+#define DCRN_CW_MCER_WOF0		0x0E
+#define DCRN_CW_MCER_WOF1		0x0F
+#define DCRN_CW_LFIR			0x10
+#define DCRN_CW_LFIR_AND		0x11
+#define DCRN_CW_LFIR_OR			0x12
+#define DCRN_CW_LFIR_MASK		0x13
+#define DCRN_CW_LFIR_MASK_AND		0x14
+#define DCRN_CW_LFIR_MASK_OR		0x15
+
+#define CW_MCER0_MEM_CE			0x00020000
+/* CMU addresses */
+#define CMUN_CRCS		0x00 /* Chip Reset Control/Status */
+#define CMUN_CONFFIR0		0x20 /* Config Reg Parity FIR 0 */
+#define CMUN_CONFFIR1		0x21 /* Config Reg Parity FIR 1 */
+#define CMUN_CONFFIR2		0x22 /* Config Reg Parity FIR 2 */
+#define CMUN_CONFFIR3		0x23 /* Config Reg Parity FIR 3 */
+#define CMUN_URCR3_RS		0x24 /* Unit Reset Control Reg 3 Set */
+#define CMUN_URCR3_C		0x25 /* Unit Reset Control Reg 3 Clear */
+#define CMUN_URCR3_P		0x26 /* Unit Reset Control Reg 3 Pulse */
+#define CMUN_PW0		0x2C /* Pulse Width Register */
+#define CMUN_URCR0_P		0x2D /* Unit Reset Control Reg 0 Pulse */
+#define CMUN_URCR1_P		0x2E /* Unit Reset Control Reg 1 Pulse */
+#define CMUN_URCR2_P		0x2F /* Unit Reset Control Reg 2 Pulse */
+#define CMUN_CLS_RW		0x30 /* Code Load Status (Read/Write) */
+#define CMUN_CLS_S		0x31 /* Code Load Status (Set) */
+#define CMUN_CLS_C		0x32 /* Code Load Status (Clear */
+#define CMUN_URCR2_RS		0x33 /* Unit Reset Control Reg 2 Set */
+#define CMUN_URCR2_C		0x34 /* Unit Reset Control Reg 2 Clear */
+#define CMUN_CLKEN0		0x35 /* Clock Enable 0 */
+#define CMUN_CLKEN1		0x36 /* Clock Enable 1 */
+#define CMUN_PCD0		0x37 /* PSI clock divider 0 */
+#define CMUN_PCD1		0x38 /* PSI clock divider 1 */
+#define CMUN_TMR0		0x39 /* Reset Timer */
+#define CMUN_TVS0		0x3A /* TV Sense Reg 0 */
+#define CMUN_TVS1		0x3B /* TV Sense Reg 1 */
+#define CMUN_MCCR		0x3C /* DRAM Configuration Reg */
+#define CMUN_FIR0		0x3D /* Fault Isolation Reg 0 */
+#define CMUN_FMR0		0x3E /* FIR Mask Reg 0 */
+#define CMUN_ETDRB		0x3F /* ETDR Backdoor */
+
+/* CRCS bit fields */
+#define CRCS_STAT_MASK		0xF0000000
+#define CRCS_STAT_POR		0x10000000
+#define CRCS_STAT_PHR		0x20000000
+#define CRCS_STAT_PCIE		0x30000000
+#define CRCS_STAT_CRCS_SYS	0x40000000
+#define CRCS_STAT_DBCR_SYS	0x50000000
+#define CRCS_STAT_HOST_SYS	0x60000000
+#define CRCS_STAT_CHIP_RST_B	0x70000000
+#define CRCS_STAT_CRCS_CHIP	0x80000000
+#define CRCS_STAT_DBCR_CHIP	0x90000000
+#define CRCS_STAT_HOST_CHIP	0xA0000000
+#define CRCS_STAT_PSI_CHIP	0xB0000000
+#define CRCS_STAT_CRCS_CORE	0xC0000000
+#define CRCS_STAT_DBCR_CORE	0xD0000000
+#define CRCS_STAT_HOST_CORE	0xE0000000
+#define CRCS_STAT_PCIE_HOT	0xF0000000
+#define CRCS_STAT_SELF_CORE	0x40000000
+#define CRCS_STAT_SELF_CHIP	0x50000000
+#define CRCS_WATCHE		0x08000000
+#define CRCS_CORE		0x04000000 /* Reset PPC440 core */
+#define CRCS_CHIP		0x02000000 /* Chip Reset */
+#define CRCS_SYS		0x01000000 /* System Reset */
+#define CRCS_WRCR		0x00800000 /* Watchdog reset on core reset */
+#define CRCS_EXTCR		0x00080000 /* CHIP_RST_B triggers chip reset */
+#define CRCS_PLOCK		0x00000002 /* PLL Locked */
+
+#define mtcmu(reg, data)		\
+do {					\
+	mtdcr(DCRN_CMU_ADDR, reg);	\
+	mtdcr(DCRN_CMU_DATA, data);	\
+} while (0)
+
+#define mfcmu(reg)\
+	({u32 data;			\
+	mtdcr(DCRN_CMU_ADDR, reg);	\
+	data = mfdcr(DCRN_CMU_DATA);	\
+	data; })
+
+#define mtl2(reg, data)			\
+do {					\
+	mtdcr(DCRN_L2CDCRAI, reg);	\
+	mtdcr(DCRN_L2CDCRDI, data);	\
+} while (0)
+
+#define mfl2(reg)			\
+	({u32 data;			\
+	mtdcr(DCRN_L2CDCRAI, reg);	\
+	data = mfdcr(DCRN_L2CDCRDI);	\
+	data; })
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_FSP2_DCR_H_ */