Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 397 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
new file mode 100644
index 000000000..0b8f2101c
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -0,0 +1,397 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC85xx setup and early boot code plus other random bits.
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2005, 2011-2012 Freescale Semiconductor Inc.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/initrd.h>
+#include <linux/interrupt.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/pgtable.h>
+
+#include <asm/page.h>
+#include <linux/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/pci-bridge.h>
+#include <asm/irq.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <asm/i8259.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc85xx.h"
+
+/*
+ * The CDS board contains an FPGA/CPLD called "Cadmus", which collects
+ * various logic and performs system control functions.
+ * Here is the FPGA/CPLD register map.
+ */
+struct cadmus_reg {
+	u8 cm_ver;		/* Board version */
+	u8 cm_csr;		/* General control/status */
+	u8 cm_rst;		/* Reset control */
+	u8 cm_hsclk;	/* High speed clock */
+	u8 cm_hsxclk;	/* High speed clock extended */
+	u8 cm_led;		/* LED data */
+	u8 cm_pci;		/* PCI control/status */
+	u8 cm_dma;		/* DMA control */
+	u8 res[248];	/* Total 256 bytes */
+};
+
+static struct cadmus_reg *cadmus;
+
+#ifdef CONFIG_PCI
+
+#define ARCADIA_HOST_BRIDGE_IDSEL	17
+#define ARCADIA_2ND_BRIDGE_IDSEL	3
+
+static int mpc85xx_exclude_device(struct pci_controller *hose,
+				  u_char bus, u_char devfn)
+{
+	/* We explicitly do not go past the Tundra 320 Bridge */
+	if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	else
+		return PCIBIOS_SUCCESSFUL;
+}
+
+static int mpc85xx_cds_restart(struct notifier_block *this,
+			       unsigned long mode, void *cmd)
+{
+	struct pci_dev *dev;
+	u_char tmp;
+
+	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
+					NULL))) {
+
+		/* Use the VIA Super Southbridge to force a PCI reset */
+		pci_read_config_byte(dev, 0x47, &tmp);
+		pci_write_config_byte(dev, 0x47, tmp | 1);
+
+		/* Flush the outbound PCI write queues */
+		pci_read_config_byte(dev, 0x47, &tmp);
+
+		/*
+		 *  At this point, the hardware reset should have triggered.
+		 *  However, if it doesn't work for some mysterious reason,
+		 *  just fall through to the default reset below.
+		 */
+
+		pci_dev_put(dev);
+	}
+
+	/*
+	 *  If we can't find the VIA chip (maybe the P2P bridge is
+	 *  disabled) or the VIA chip reset didn't work, just return
+	 *  and let default reset sequence happen.
+	 */
+	return NOTIFY_DONE;
+}
+
+static int mpc85xx_cds_restart_register(void)
+{
+	static struct notifier_block restart_handler;
+
+	restart_handler.notifier_call = mpc85xx_cds_restart;
+	restart_handler.priority = 192;
+
+	return register_restart_handler(&restart_handler);
+}
+machine_arch_initcall(mpc85xx_cds, mpc85xx_cds_restart_register);
+
+
+static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev)
+{
+	u_char c;
+	if (dev->vendor == PCI_VENDOR_ID_VIA) {
+		switch (dev->device) {
+		case PCI_DEVICE_ID_VIA_82C586_1:
+			/*
+			 * U-Boot does not set the enable bits
+			 * for the IDE device. Force them on here.
+			 */
+			pci_read_config_byte(dev, 0x40, &c);
+			c |= 0x03; /* IDE: Chip Enable Bits */
+			pci_write_config_byte(dev, 0x40, c);
+
+			/*
+			 * Since only primary interface works, force the
+			 * IDE function to standard primary IDE interrupt
+			 * w/ 8259 offset
+			 */
+			dev->irq = 14;
+			pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+			break;
+		/*
+		 * Force legacy USB interrupt routing
+		 */
+		case PCI_DEVICE_ID_VIA_82C586_2:
+		/* There are two USB controllers.
+		 * Identify them by function number
+		 */
+			if (PCI_FUNC(dev->devfn) == 3)
+				dev->irq = 11;
+			else
+				dev->irq = 10;
+			pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+			break;
+		default:
+			break;
+		}
+	}
+}
+
+static void skip_fake_bridge(struct pci_dev *dev)
+{
+	/* Make it an error to skip the fake bridge
+	 * in pci_setup_device() in probe.c */
+	dev->hdr_type = 0x7f;
+}
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x3fff, skip_fake_bridge);
+DECLARE_PCI_FIXUP_EARLY(0x3fff, 0x1957, skip_fake_bridge);
+DECLARE_PCI_FIXUP_EARLY(0xff3f, 0x5719, skip_fake_bridge);
+
+#define PCI_DEVICE_ID_IDT_TSI310	0x01a7
+
+/*
+ * Fix Tsi310 PCI-X bridge resource.
+ * Force the bridge to open a window from 0x0000-0x1fff in PCI I/O space.
+ * This allows legacy I/O(i8259, etc) on the VIA southbridge to be accessed.
+ */
+void mpc85xx_cds_fixup_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev = bus->self;
+	struct resource *res = bus->resource[0];
+
+	if (dev != NULL &&
+	    dev->vendor == PCI_VENDOR_ID_IBM &&
+	    dev->device == PCI_DEVICE_ID_IDT_TSI310) {
+		if (res) {
+			res->start = 0;
+			res->end   = 0x1fff;
+			res->flags = IORESOURCE_IO;
+			pr_info("mpc85xx_cds: PCI bridge resource fixup applied\n");
+			pr_info("mpc85xx_cds: %pR\n", res);
+		}
+	}
+
+	fsl_pcibios_fixup_bus(bus);
+}
+
+#ifdef CONFIG_PPC_I8259
+static void mpc85xx_8259_cascade_handler(struct irq_desc *desc)
+{
+	unsigned int cascade_irq = i8259_irq();
+
+	if (cascade_irq)
+		/* handle an interrupt from the 8259 */
+		generic_handle_irq(cascade_irq);
+
+	/* check for any interrupts from the shared IRQ line */
+	handle_fasteoi_irq(desc);
+}
+
+static irqreturn_t mpc85xx_8259_cascade_action(int irq, void *dev_id)
+{
+	return IRQ_HANDLED;
+}
+#endif /* PPC_I8259 */
+#endif /* CONFIG_PCI */
+
+static void __init mpc85xx_cds_pic_init(void)
+{
+	struct mpic *mpic;
+	mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
+			0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	mpic_init(mpic);
+}
+
+#if defined(CONFIG_PPC_I8259) && defined(CONFIG_PCI)
+static int mpc85xx_cds_8259_attach(void)
+{
+	int ret;
+	struct device_node *np = NULL;
+	struct device_node *cascade_node = NULL;
+	int cascade_irq;
+
+	/* Initialize the i8259 controller */
+	for_each_node_by_type(np, "interrupt-controller")
+		if (of_device_is_compatible(np, "chrp,iic")) {
+			cascade_node = np;
+			break;
+		}
+
+	if (cascade_node == NULL) {
+		printk(KERN_DEBUG "Could not find i8259 PIC\n");
+		return -ENODEV;
+	}
+
+	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+	if (!cascade_irq) {
+		printk(KERN_ERR "Failed to map cascade interrupt\n");
+		return -ENXIO;
+	}
+
+	i8259_init(cascade_node, 0);
+	of_node_put(cascade_node);
+
+	/*
+	 *  Hook the interrupt to make sure desc->action is never NULL.
+	 *  This is required to ensure that the interrupt does not get
+	 *  disabled when the last user of the shared IRQ line frees their
+	 *  interrupt.
+	 */
+	ret = request_irq(cascade_irq, mpc85xx_8259_cascade_action,
+			  IRQF_SHARED | IRQF_NO_THREAD, "8259 cascade",
+			  cascade_node);
+	if (ret) {
+		printk(KERN_ERR "Failed to setup cascade interrupt\n");
+		return ret;
+	}
+
+	/* Success. Connect our low-level cascade handler. */
+	irq_set_handler(cascade_irq, mpc85xx_8259_cascade_handler);
+
+	return 0;
+}
+machine_device_initcall(mpc85xx_cds, mpc85xx_cds_8259_attach);
+
+#endif /* CONFIG_PPC_I8259 */
+
+static void __init mpc85xx_cds_pci_assign_primary(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+
+	if (fsl_pci_primary)
+		return;
+
+	/*
+	 * MPC85xx_CDS has ISA bridge but unfortunately there is no
+	 * isa node in device tree. We now looking for i8259 node as
+	 * a workaround for such a broken device tree. This routine
+	 * is for complying to all device trees.
+	 */
+	np = of_find_node_by_name(NULL, "i8259");
+	while ((fsl_pci_primary = of_get_parent(np))) {
+		of_node_put(np);
+		np = fsl_pci_primary;
+
+		if ((of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) &&
+		    of_device_is_available(np))
+			return;
+	}
+#endif
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init mpc85xx_cds_setup_arch(void)
+{
+	struct device_node *np;
+	int cds_pci_slot;
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc85xx_cds_setup_arch()", 0);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc8548cds-fpga");
+	if (!np) {
+		pr_err("Could not find FPGA node.\n");
+		return;
+	}
+
+	cadmus = of_iomap(np, 0);
+	of_node_put(np);
+	if (!cadmus) {
+		pr_err("Fail to map FPGA area.\n");
+		return;
+	}
+
+	if (ppc_md.progress) {
+		char buf[40];
+		cds_pci_slot = ((in_8(&cadmus->cm_csr) >> 6) & 0x3) + 1;
+		snprintf(buf, 40, "CDS Version = 0x%x in slot %d\n",
+				in_8(&cadmus->cm_ver), cds_pci_slot);
+		ppc_md.progress(buf, 0);
+	}
+
+#ifdef CONFIG_PCI
+	ppc_md.pci_irq_fixup = mpc85xx_cds_pci_irq_fixup;
+	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+#endif
+
+	mpc85xx_cds_pci_assign_primary();
+	fsl_pci_assign_primary();
+}
+
+static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
+{
+	uint pvid, svid, phid1;
+
+	pvid = mfspr(SPRN_PVR);
+	svid = mfspr(SPRN_SVR);
+
+	seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
+	seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n",
+			in_8(&cadmus->cm_ver));
+	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+	/* Display cpu Pll setting */
+	phid1 = mfspr(SPRN_HID1);
+	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+}
+
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc85xx_cds_probe(void)
+{
+	return of_machine_is_compatible("MPC85xxCDS");
+}
+
+machine_arch_initcall(mpc85xx_cds, mpc85xx_common_publish_devices);
+
+define_machine(mpc85xx_cds) {
+	.name		= "MPC85xx CDS",
+	.probe		= mpc85xx_cds_probe,
+	.setup_arch	= mpc85xx_cds_setup_arch,
+	.init_IRQ	= mpc85xx_cds_pic_init,
+	.show_cpuinfo	= mpc85xx_cds_show_cpuinfo,
+	.get_irq	= mpic_get_irq,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= mpc85xx_cds_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
+#endif
+	.calibrate_decr = generic_calibrate_decr,
+	.progress	= udbg_progress,
+};