Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 274 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
new file mode 100644
index 000000000..47eaf7534
--- /dev/null
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  linux/arch/powerpc/platforms/cell/cell_setup.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *  Adapted from 'alpha' version by Gary Thomas
+ *  Modified by Cort Dougan (cort@cs.nmt.edu)
+ *  Modified by PPC64 Team, IBM Corp
+ *  Modified by Cell Team, IBM Deutschland Entwicklung GmbH
+ */
+#undef DEBUG
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/export.h>
+#include <linux/unistd.h>
+#include <linux/user.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/console.h>
+#include <linux/mutex.h>
+#include <linux/memory_hotplug.h>
+#include <linux/of_platform.h>
+
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/rtas.h>
+#include <asm/pci-bridge.h>
+#include <asm/iommu.h>
+#include <asm/dma.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/nvram.h>
+#include <asm/cputable.h>
+#include <asm/ppc-pci.h>
+#include <asm/irq.h>
+#include <asm/spu.h>
+#include <asm/spu_priv1.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <asm/cell-regs.h>
+#include <asm/io-workarounds.h>
+
+#include "cell.h"
+#include "interrupt.h"
+#include "pervasive.h"
+#include "ras.h"
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+static void cell_show_cpuinfo(struct seq_file *m)
+{
+	struct device_node *root;
+	const char *model = "";
+
+	root = of_find_node_by_path("/");
+	if (root)
+		model = of_get_property(root, "model", NULL);
+	seq_printf(m, "machine\t\t: CHRP %s\n", model);
+	of_node_put(root);
+}
+
+static void cell_progress(char *s, unsigned short hex)
+{
+	printk("*** %04x : %s\n", hex, s ? s : "");
+}
+
+static void cell_fixup_pcie_rootcomplex(struct pci_dev *dev)
+{
+	struct pci_controller *hose;
+	const char *s;
+	int i;
+
+	if (!machine_is(cell))
+		return;
+
+	/* We're searching for a direct child of the PHB */
+	if (dev->bus->self != NULL || dev->devfn != 0)
+		return;
+
+	hose = pci_bus_to_host(dev->bus);
+	if (hose == NULL)
+		return;
+
+	/* Only on PCIE */
+	if (!of_device_is_compatible(hose->dn, "pciex"))
+		return;
+
+	/* And only on axon */
+	s = of_get_property(hose->dn, "model", NULL);
+	if (!s || strcmp(s, "Axon") != 0)
+		return;
+
+	for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) {
+		dev->resource[i].start = dev->resource[i].end = 0;
+		dev->resource[i].flags = 0;
+	}
+
+	printk(KERN_DEBUG "PCI: Hiding resources on Axon PCIE RC %s\n",
+	       pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, cell_fixup_pcie_rootcomplex);
+
+static int cell_setup_phb(struct pci_controller *phb)
+{
+	const char *model;
+	struct device_node *np;
+
+	int rc = rtas_setup_phb(phb);
+	if (rc)
+		return rc;
+
+	phb->controller_ops = cell_pci_controller_ops;
+
+	np = phb->dn;
+	model = of_get_property(np, "model", NULL);
+	if (model == NULL || !of_node_name_eq(np, "pci"))
+		return 0;
+
+	/* Setup workarounds for spider */
+	if (strcmp(model, "Spider"))
+		return 0;
+
+	iowa_register_bus(phb, &spiderpci_ops, &spiderpci_iowa_init,
+				  (void *)SPIDER_PCI_REG_BASE);
+	return 0;
+}
+
+static const struct of_device_id cell_bus_ids[] __initconst = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .type = "spider", },
+	{ .type = "axon", },
+	{ .type = "plb5", },
+	{ .type = "plb4", },
+	{ .type = "opb", },
+	{ .type = "ebc", },
+	{},
+};
+
+static int __init cell_publish_devices(void)
+{
+	struct device_node *root = of_find_node_by_path("/");
+	struct device_node *np;
+	int node;
+
+	/* Publish OF platform devices for southbridge IOs */
+	of_platform_bus_probe(NULL, cell_bus_ids, NULL);
+
+	/* On spider based blades, we need to manually create the OF
+	 * platform devices for the PCI host bridges
+	 */
+	for_each_child_of_node(root, np) {
+		if (!of_node_is_type(np, "pci") && !of_node_is_type(np, "pciex"))
+			continue;
+		of_platform_device_create(np, NULL, NULL);
+	}
+
+	of_node_put(root);
+
+	/* There is no device for the MIC memory controller, thus we create
+	 * a platform device for it to attach the EDAC driver to.
+	 */
+	for_each_online_node(node) {
+		if (cbe_get_cpu_mic_tm_regs(cbe_node_to_cpu(node)) == NULL)
+			continue;
+		platform_device_register_simple("cbe-mic", node, NULL, 0);
+	}
+
+	return 0;
+}
+machine_subsys_initcall(cell, cell_publish_devices);
+
+static void __init mpic_init_IRQ(void)
+{
+	struct device_node *dn;
+	struct mpic *mpic;
+
+	for_each_node_by_name(dn, "interrupt-controller") {
+		if (!of_device_is_compatible(dn, "CBEA,platform-open-pic"))
+			continue;
+
+		/* The MPIC driver will get everything it needs from the
+		 * device-tree, just pass 0 to all arguments
+		 */
+		mpic = mpic_alloc(dn, 0, MPIC_SECONDARY | MPIC_NO_RESET,
+				0, 0, " MPIC     ");
+		if (mpic == NULL)
+			continue;
+		mpic_init(mpic);
+	}
+}
+
+
+static void __init cell_init_irq(void)
+{
+	iic_init_IRQ();
+	spider_init_IRQ();
+	mpic_init_IRQ();
+}
+
+static void __init cell_set_dabrx(void)
+{
+	mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
+}
+
+static void __init cell_setup_arch(void)
+{
+#ifdef CONFIG_SPU_BASE
+	spu_priv1_ops = &spu_priv1_mmio_ops;
+	spu_management_ops = &spu_management_of_ops;
+#endif
+
+	cbe_regs_init();
+
+	cell_set_dabrx();
+
+#ifdef CONFIG_CBE_RAS
+	cbe_ras_init();
+#endif
+
+#ifdef CONFIG_SMP
+	smp_init_cell();
+#endif
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000;
+
+	/* Find and initialize PCI host bridges */
+	init_pci_config_tokens();
+
+	cbe_pervasive_init();
+
+	mmio_nvram_init();
+}
+
+static int __init cell_probe(void)
+{
+	if (!of_machine_is_compatible("IBM,CBEA") &&
+	    !of_machine_is_compatible("IBM,CPBW-1.0"))
+		return 0;
+
+	pm_power_off = rtas_power_off;
+
+	return 1;
+}
+
+define_machine(cell) {
+	.name			= "Cell",
+	.probe			= cell_probe,
+	.setup_arch		= cell_setup_arch,
+	.show_cpuinfo		= cell_show_cpuinfo,
+	.restart		= rtas_restart,
+	.halt			= rtas_halt,
+	.get_boot_time		= rtas_get_boot_time,
+	.get_rtc_time		= rtas_get_rtc_time,
+	.set_rtc_time		= rtas_set_rtc_time,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= cell_progress,
+	.init_IRQ       	= cell_init_irq,
+	.pci_setup_phb		= cell_setup_phb,
+};
+
+struct pci_controller_ops cell_pci_controller_ops;