Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 344 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
new file mode 100644
index 000000000..11df737c8
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * External Interrupt Controller on Spider South Bridge
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/ioport.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/pgtable.h>
+
+#include <asm/io.h>
+
+#include "interrupt.h"
+
+/* register layout taken from Spider spec, table 7.4-4 */
+enum {
+	TIR_DEN		= 0x004, /* Detection Enable Register */
+	TIR_MSK		= 0x084, /* Mask Level Register */
+	TIR_EDC		= 0x0c0, /* Edge Detection Clear Register */
+	TIR_PNDA	= 0x100, /* Pending Register A */
+	TIR_PNDB	= 0x104, /* Pending Register B */
+	TIR_CS		= 0x144, /* Current Status Register */
+	TIR_LCSA	= 0x150, /* Level Current Status Register A */
+	TIR_LCSB	= 0x154, /* Level Current Status Register B */
+	TIR_LCSC	= 0x158, /* Level Current Status Register C */
+	TIR_LCSD	= 0x15c, /* Level Current Status Register D */
+	TIR_CFGA	= 0x200, /* Setting Register A0 */
+	TIR_CFGB	= 0x204, /* Setting Register B0 */
+			/* 0x208 ... 0x3ff Setting Register An/Bn */
+	TIR_PPNDA	= 0x400, /* Packet Pending Register A */
+	TIR_PPNDB	= 0x404, /* Packet Pending Register B */
+	TIR_PIERA	= 0x408, /* Packet Output Error Register A */
+	TIR_PIERB	= 0x40c, /* Packet Output Error Register B */
+	TIR_PIEN	= 0x444, /* Packet Output Enable Register */
+	TIR_PIPND	= 0x454, /* Packet Output Pending Register */
+	TIRDID		= 0x484, /* Spider Device ID Register */
+	REISTIM		= 0x500, /* Reissue Command Timeout Time Setting */
+	REISTIMEN	= 0x504, /* Reissue Command Timeout Setting */
+	REISWAITEN	= 0x508, /* Reissue Wait Control*/
+};
+
+#define SPIDER_CHIP_COUNT	4
+#define SPIDER_SRC_COUNT	64
+#define SPIDER_IRQ_INVALID	63
+
+struct spider_pic {
+	struct irq_domain		*host;
+	void __iomem		*regs;
+	unsigned int		node_id;
+};
+static struct spider_pic spider_pics[SPIDER_CHIP_COUNT];
+
+static struct spider_pic *spider_irq_data_to_pic(struct irq_data *d)
+{
+	return irq_data_get_irq_chip_data(d);
+}
+
+static void __iomem *spider_get_irq_config(struct spider_pic *pic,
+					   unsigned int src)
+{
+	return pic->regs + TIR_CFGA + 8 * src;
+}
+
+static void spider_unmask_irq(struct irq_data *d)
+{
+	struct spider_pic *pic = spider_irq_data_to_pic(d);
+	void __iomem *cfg = spider_get_irq_config(pic, irqd_to_hwirq(d));
+
+	out_be32(cfg, in_be32(cfg) | 0x30000000u);
+}
+
+static void spider_mask_irq(struct irq_data *d)
+{
+	struct spider_pic *pic = spider_irq_data_to_pic(d);
+	void __iomem *cfg = spider_get_irq_config(pic, irqd_to_hwirq(d));
+
+	out_be32(cfg, in_be32(cfg) & ~0x30000000u);
+}
+
+static void spider_ack_irq(struct irq_data *d)
+{
+	struct spider_pic *pic = spider_irq_data_to_pic(d);
+	unsigned int src = irqd_to_hwirq(d);
+
+	/* Reset edge detection logic if necessary
+	 */
+	if (irqd_is_level_type(d))
+		return;
+
+	/* Only interrupts 47 to 50 can be set to edge */
+	if (src < 47 || src > 50)
+		return;
+
+	/* Perform the clear of the edge logic */
+	out_be32(pic->regs + TIR_EDC, 0x100 | (src & 0xf));
+}
+
+static int spider_set_irq_type(struct irq_data *d, unsigned int type)
+{
+	unsigned int sense = type & IRQ_TYPE_SENSE_MASK;
+	struct spider_pic *pic = spider_irq_data_to_pic(d);
+	unsigned int hw = irqd_to_hwirq(d);
+	void __iomem *cfg = spider_get_irq_config(pic, hw);
+	u32 old_mask;
+	u32 ic;
+
+	/* Note that only level high is supported for most interrupts */
+	if (sense != IRQ_TYPE_NONE && sense != IRQ_TYPE_LEVEL_HIGH &&
+	    (hw < 47 || hw > 50))
+		return -EINVAL;
+
+	/* Decode sense type */
+	switch(sense) {
+	case IRQ_TYPE_EDGE_RISING:
+		ic = 0x3;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		ic = 0x2;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		ic = 0x0;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+	case IRQ_TYPE_NONE:
+		ic = 0x1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Configure the source. One gross hack that was there before and
+	 * that I've kept around is the priority to the BE which I set to
+	 * be the same as the interrupt source number. I don't know whether
+	 * that's supposed to make any kind of sense however, we'll have to
+	 * decide that, but for now, I'm not changing the behaviour.
+	 */
+	old_mask = in_be32(cfg) & 0x30000000u;
+	out_be32(cfg, old_mask | (ic << 24) | (0x7 << 16) |
+		 (pic->node_id << 4) | 0xe);
+	out_be32(cfg + 4, (0x2 << 16) | (hw & 0xff));
+
+	return 0;
+}
+
+static struct irq_chip spider_pic = {
+	.name = "SPIDER",
+	.irq_unmask = spider_unmask_irq,
+	.irq_mask = spider_mask_irq,
+	.irq_ack = spider_ack_irq,
+	.irq_set_type = spider_set_irq_type,
+};
+
+static int spider_host_map(struct irq_domain *h, unsigned int virq,
+			irq_hw_number_t hw)
+{
+	irq_set_chip_data(virq, h->host_data);
+	irq_set_chip_and_handler(virq, &spider_pic, handle_level_irq);
+
+	/* Set default irq type */
+	irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static int spider_host_xlate(struct irq_domain *h, struct device_node *ct,
+			   const u32 *intspec, unsigned int intsize,
+			   irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+
+{
+	/* Spider interrupts have 2 cells, first is the interrupt source,
+	 * second, well, I don't know for sure yet ... We mask the top bits
+	 * because old device-trees encode a node number in there
+	 */
+	*out_hwirq = intspec[0] & 0x3f;
+	*out_flags = IRQ_TYPE_LEVEL_HIGH;
+	return 0;
+}
+
+static const struct irq_domain_ops spider_host_ops = {
+	.map = spider_host_map,
+	.xlate = spider_host_xlate,
+};
+
+static void spider_irq_cascade(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct spider_pic *pic = irq_desc_get_handler_data(desc);
+	unsigned int cs;
+
+	cs = in_be32(pic->regs + TIR_CS) >> 24;
+	if (cs != SPIDER_IRQ_INVALID)
+		generic_handle_domain_irq(pic->host, cs);
+
+	chip->irq_eoi(&desc->irq_data);
+}
+
+/* For hooking up the cascade we have a problem. Our device-tree is
+ * crap and we don't know on which BE iic interrupt we are hooked on at
+ * least not the "standard" way. We can reconstitute it based on two
+ * informations though: which BE node we are connected to and whether
+ * we are connected to IOIF0 or IOIF1. Right now, we really only care
+ * about the IBM cell blade and we know that its firmware gives us an
+ * interrupt-map property which is pretty strange.
+ */
+static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
+{
+	unsigned int virq;
+	const u32 *imap, *tmp;
+	int imaplen, intsize, unit;
+	struct device_node *iic;
+	struct device_node *of_node;
+
+	of_node = irq_domain_get_of_node(pic->host);
+
+	/* First, we check whether we have a real "interrupts" in the device
+	 * tree in case the device-tree is ever fixed
+	 */
+	virq = irq_of_parse_and_map(of_node, 0);
+	if (virq)
+		return virq;
+
+	/* Now do the horrible hacks */
+	tmp = of_get_property(of_node, "#interrupt-cells", NULL);
+	if (tmp == NULL)
+		return 0;
+	intsize = *tmp;
+	imap = of_get_property(of_node, "interrupt-map", &imaplen);
+	if (imap == NULL || imaplen < (intsize + 1))
+		return 0;
+	iic = of_find_node_by_phandle(imap[intsize]);
+	if (iic == NULL)
+		return 0;
+	imap += intsize + 1;
+	tmp = of_get_property(iic, "#interrupt-cells", NULL);
+	if (tmp == NULL) {
+		of_node_put(iic);
+		return 0;
+	}
+	intsize = *tmp;
+	/* Assume unit is last entry of interrupt specifier */
+	unit = imap[intsize - 1];
+	/* Ok, we have a unit, now let's try to get the node */
+	tmp = of_get_property(iic, "ibm,interrupt-server-ranges", NULL);
+	if (tmp == NULL) {
+		of_node_put(iic);
+		return 0;
+	}
+	/* ugly as hell but works for now */
+	pic->node_id = (*tmp) >> 1;
+	of_node_put(iic);
+
+	/* Ok, now let's get cracking. You may ask me why I just didn't match
+	 * the iic host from the iic OF node, but that way I'm still compatible
+	 * with really really old old firmwares for which we don't have a node
+	 */
+	/* Manufacture an IIC interrupt number of class 2 */
+	virq = irq_create_mapping(NULL,
+				  (pic->node_id << IIC_IRQ_NODE_SHIFT) |
+				  (2 << IIC_IRQ_CLASS_SHIFT) |
+				  unit);
+	if (!virq)
+		printk(KERN_ERR "spider_pic: failed to map cascade !");
+	return virq;
+}
+
+
+static void __init spider_init_one(struct device_node *of_node, int chip,
+				   unsigned long addr)
+{
+	struct spider_pic *pic = &spider_pics[chip];
+	int i, virq;
+
+	/* Map registers */
+	pic->regs = ioremap(addr, 0x1000);
+	if (pic->regs == NULL)
+		panic("spider_pic: can't map registers !");
+
+	/* Allocate a host */
+	pic->host = irq_domain_add_linear(of_node, SPIDER_SRC_COUNT,
+					  &spider_host_ops, pic);
+	if (pic->host == NULL)
+		panic("spider_pic: can't allocate irq host !");
+
+	/* Go through all sources and disable them */
+	for (i = 0; i < SPIDER_SRC_COUNT; i++) {
+		void __iomem *cfg = pic->regs + TIR_CFGA + 8 * i;
+		out_be32(cfg, in_be32(cfg) & ~0x30000000u);
+	}
+
+	/* do not mask any interrupts because of level */
+	out_be32(pic->regs + TIR_MSK, 0x0);
+
+	/* enable interrupt packets to be output */
+	out_be32(pic->regs + TIR_PIEN, in_be32(pic->regs + TIR_PIEN) | 0x1);
+
+	/* Hook up the cascade interrupt to the iic and nodeid */
+	virq = spider_find_cascade_and_node(pic);
+	if (!virq)
+		return;
+	irq_set_handler_data(virq, pic);
+	irq_set_chained_handler(virq, spider_irq_cascade);
+
+	printk(KERN_INFO "spider_pic: node %d, addr: 0x%lx %pOF\n",
+	       pic->node_id, addr, of_node);
+
+	/* Enable the interrupt detection enable bit. Do this last! */
+	out_be32(pic->regs + TIR_DEN, in_be32(pic->regs + TIR_DEN) | 0x1);
+}
+
+void __init spider_init_IRQ(void)
+{
+	struct resource r;
+	struct device_node *dn;
+	int chip = 0;
+
+	/* XXX node numbers are totally bogus. We _hope_ we get the device
+	 * nodes in the right order here but that's definitely not guaranteed,
+	 * we need to get the node from the device tree instead.
+	 * There is currently no proper property for it (but our whole
+	 * device-tree is bogus anyway) so all we can do is pray or maybe test
+	 * the address and deduce the node-id
+	 */
+	for_each_node_by_name(dn, "interrupt-controller") {
+		if (of_device_is_compatible(dn, "CBEA,platform-spider-pic")) {
+			if (of_address_to_resource(dn, 0, &r)) {
+				printk(KERN_WARNING "spider-pic: Failed\n");
+				continue;
+			}
+		} else if (of_device_is_compatible(dn, "sti,platform-spider-pic")
+			   && (chip < 2)) {
+			static long hard_coded_pics[] =
+				{ 0x24000008000ul, 0x34000008000ul};
+			r.start = hard_coded_pics[chip];
+		} else
+			continue;
+		spider_init_one(dn, chip++, r.start);
+	}
+}