Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 280 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c
new file mode 100644
index 000000000..bebc5a972
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/holly.c
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Board setup routines for the IBM 750GX/CL platform w/ TSI10x bridge
+ *
+ * Copyright 2007 IBM Corporation
+ *
+ * Stephen Winiecki <stevewin@us.ibm.com>
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Based on code from mpc7448_hpc2.c
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/extable.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/udbg.h>
+#include <asm/tsi108.h>
+#include <asm/pci-bridge.h>
+#include <asm/reg.h>
+#include <mm/mmu_decl.h>
+#include <asm/tsi108_irq.h>
+#include <asm/tsi108_pci.h>
+#include <asm/mpic.h>
+
+#undef DEBUG
+
+#define HOLLY_PCI_CFG_PHYS 0x7c000000
+
+static int holly_exclude_device(struct pci_controller *hose, u_char bus,
+				u_char devfn)
+{
+	if (bus == 0 && PCI_SLOT(devfn) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	else
+		return PCIBIOS_SUCCESSFUL;
+}
+
+static void __init holly_remap_bridge(void)
+{
+	u32 lut_val, lut_addr;
+	int i;
+
+	printk(KERN_INFO "Remapping PCI bridge\n");
+
+	/* Re-init the PCI bridge and LUT registers to have mappings that don't
+	 * rely on PIBS
+	 */
+	lut_addr = 0x900;
+	for (i = 0; i < 31; i++) {
+		tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000201);
+		lut_addr += 4;
+		tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0);
+		lut_addr += 4;
+	}
+
+	/* Reserve the last LUT entry for PCI I/O space */
+	tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000241);
+	lut_addr += 4;
+	tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0);
+
+	/* Map PCI I/O space */
+	tsi108_write_reg(TSI108_PCI_PFAB_IO_UPPER, 0x0);
+	tsi108_write_reg(TSI108_PCI_PFAB_IO, 0x1);
+
+	/* Map PCI CFG space */
+	tsi108_write_reg(TSI108_PCI_PFAB_BAR0_UPPER, 0x0);
+	tsi108_write_reg(TSI108_PCI_PFAB_BAR0, 0x7c000000 | 0x01);
+
+	/* We don't need MEM32 and PRM remapping so disable them */
+	tsi108_write_reg(TSI108_PCI_PFAB_MEM32, 0x0);
+	tsi108_write_reg(TSI108_PCI_PFAB_PFM3, 0x0);
+	tsi108_write_reg(TSI108_PCI_PFAB_PFM4, 0x0);
+
+	/* Set P2O_BAR0 */
+	tsi108_write_reg(TSI108_PCI_P2O_BAR0_UPPER, 0x0);
+	tsi108_write_reg(TSI108_PCI_P2O_BAR0, 0xc0000000);
+
+	/* Init the PCI LUTs to do no remapping */
+	lut_addr = 0x500;
+	lut_val = 0x00000002;
+
+	for (i = 0; i < 32; i++) {
+		tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, lut_val);
+		lut_addr += 4;
+		tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, 0x40000000);
+		lut_addr += 4;
+		lut_val += 0x02000000;
+	}
+	tsi108_write_reg(TSI108_PCI_P2O_PAGE_SIZES, 0x00007900);
+
+	/* Set 64-bit PCI bus address for system memory */
+	tsi108_write_reg(TSI108_PCI_P2O_BAR2_UPPER, 0x0);
+	tsi108_write_reg(TSI108_PCI_P2O_BAR2, 0x0);
+}
+
+static void __init holly_init_pci(void)
+{
+	struct device_node *np;
+
+	if (ppc_md.progress)
+		ppc_md.progress("holly_setup_arch():set_bridge", 0);
+
+	/* setup PCI host bridge */
+	holly_remap_bridge();
+
+	np = of_find_node_by_type(NULL, "pci");
+	if (np)
+		tsi108_setup_pci(np, HOLLY_PCI_CFG_PHYS, 1);
+
+	of_node_put(np);
+
+	ppc_md.pci_exclude_device = holly_exclude_device;
+	if (ppc_md.progress)
+		ppc_md.progress("tsi108: resources set", 0x100);
+}
+
+static void __init holly_setup_arch(void)
+{
+	tsi108_csr_vir_base = get_vir_csrbase();
+
+	printk(KERN_INFO "PPC750GX/CL Platform\n");
+}
+
+/*
+ * Interrupt setup and service.  Interrupts on the holly come
+ * from the four external INT pins, PCI interrupts are routed via
+ * PCI interrupt control registers, it generates internal IRQ23
+ *
+ * Interrupt routing on the Holly Board:
+ * TSI108:PB_INT[0] -> CPU0:INT#
+ * TSI108:PB_INT[1] -> CPU0:MCP#
+ * TSI108:PB_INT[2] -> N/C
+ * TSI108:PB_INT[3] -> N/C
+ */
+static void __init holly_init_IRQ(void)
+{
+	struct mpic *mpic;
+#ifdef CONFIG_PCI
+	unsigned int cascade_pci_irq;
+	struct device_node *tsi_pci;
+	struct device_node *cascade_node = NULL;
+#endif
+
+	mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+			MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
+			24, 0,
+			"Tsi108_PIC");
+
+	BUG_ON(mpic == NULL);
+
+	mpic_assign_isu(mpic, 0, mpic->paddr + 0x100);
+
+	mpic_init(mpic);
+
+#ifdef CONFIG_PCI
+	tsi_pci = of_find_node_by_type(NULL, "pci");
+	if (tsi_pci == NULL) {
+		printk(KERN_ERR "%s: No tsi108 pci node found !\n", __func__);
+		return;
+	}
+
+	cascade_node = of_find_node_by_type(NULL, "pic-router");
+	if (cascade_node == NULL) {
+		printk(KERN_ERR "%s: No tsi108 pci cascade node found !\n", __func__);
+		return;
+	}
+
+	cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
+	pr_debug("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, (u32) cascade_pci_irq);
+	tsi108_pci_int_init(cascade_node);
+	irq_set_handler_data(cascade_pci_irq, mpic);
+	irq_set_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
+
+	of_node_put(tsi_pci);
+	of_node_put(cascade_node);
+#endif
+	/* Configure MPIC outputs to CPU0 */
+	tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
+}
+
+static void holly_show_cpuinfo(struct seq_file *m)
+{
+	seq_printf(m, "vendor\t\t: IBM\n");
+	seq_printf(m, "machine\t\t: PPC750 GX/CL\n");
+}
+
+static void __noreturn holly_restart(char *cmd)
+{
+	__be32 __iomem *ocn_bar1 = NULL;
+	unsigned long bar;
+	struct device_node *bridge = NULL;
+	const void *prop;
+	int size;
+	phys_addr_t addr = 0xc0000000;
+
+	local_irq_disable();
+
+	bridge = of_find_node_by_type(NULL, "tsi-bridge");
+	if (bridge) {
+		prop = of_get_property(bridge, "reg", &size);
+		addr = of_translate_address(bridge, prop);
+		of_node_put(bridge);
+	}
+	addr += (TSI108_PB_OFFSET + 0x414);
+
+	ocn_bar1 = ioremap(addr, 0x4);
+
+	/* Turn on the BOOT bit so the addresses are correctly
+	 * routed to the HLP interface */
+	bar = ioread32be(ocn_bar1);
+	bar |= 2;
+	iowrite32be(bar, ocn_bar1);
+	iosync();
+
+	/* Set SRR0 to the reset vector and turn on MSR_IP */
+	mtspr(SPRN_SRR0, 0xfff00100);
+	mtspr(SPRN_SRR1, MSR_IP);
+
+	/* Do an rfi to jump back to firmware.  Somewhat evil,
+	 * but it works
+	 */
+	__asm__ __volatile__("rfi" : : : "memory");
+
+	/* Spin until reset happens.  Shouldn't really get here */
+	for (;;) ;
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init holly_probe(void)
+{
+	if (!of_machine_is_compatible("ibm,holly"))
+		return 0;
+	return 1;
+}
+
+static int ppc750_machine_check_exception(struct pt_regs *regs)
+{
+	const struct exception_table_entry *entry;
+
+	/* Are we prepared to handle this fault */
+	if ((entry = search_exception_tables(regs->nip)) != NULL) {
+		tsi108_clear_pci_cfg_error();
+		regs_set_recoverable(regs);
+		regs_set_return_ip(regs, extable_fixup(entry));
+		return 1;
+	}
+	return 0;
+}
+
+define_machine(holly){
+	.name                   	= "PPC750 GX/CL TSI",
+	.probe                  	= holly_probe,
+	.setup_arch             	= holly_setup_arch,
+	.discover_phbs			= holly_init_pci,
+	.init_IRQ               	= holly_init_IRQ,
+	.show_cpuinfo           	= holly_show_cpuinfo,
+	.get_irq                	= mpic_get_irq,
+	.restart                	= holly_restart,
+	.calibrate_decr         	= generic_calibrate_decr,
+	.machine_check_exception	= ppc750_machine_check_exception,
+	.progress               	= udbg_progress,
+};