Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 294 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c
new file mode 100644
index 000000000..f27d31414
--- /dev/null
+++ b/arch/powerpc/platforms/pasemi/pci.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2006 PA Semi, Inc
+ *
+ * Authors: Kip Walker, PA Semi
+ *	    Olof Johansson, PA Semi
+ *
+ * Maintained by: Olof Johansson <olof@lixom.net>
+ *
+ * Based on arch/powerpc/platforms/maple/pci.c
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/pci.h>
+
+#include <asm/pci-bridge.h>
+#include <asm/isa-bridge.h>
+#include <asm/machdep.h>
+
+#include <asm/ppc-pci.h>
+
+#include "pasemi.h"
+
+#define PA_PXP_CFA(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off))
+
+static inline int pa_pxp_offset_valid(u8 bus, u8 devfn, int offset)
+{
+	/* Device 0 Function 0 is special: It's config space spans function 1 as
+	 * well, so allow larger offset. It's really a two-function device but the
+	 * second function does not probe.
+	 */
+	if (bus == 0 && devfn == 0)
+		return offset < 8192;
+	else
+		return offset < 4096;
+}
+
+static void volatile __iomem *pa_pxp_cfg_addr(struct pci_controller *hose,
+				       u8 bus, u8 devfn, int offset)
+{
+	return hose->cfg_data + PA_PXP_CFA(bus, devfn, offset);
+}
+
+static inline int is_root_port(int busno, int devfn)
+{
+	return ((busno == 0) && (PCI_FUNC(devfn) < 4) &&
+		 ((PCI_SLOT(devfn) == 16) || (PCI_SLOT(devfn) == 17)));
+}
+
+static inline int is_5945_reg(int reg)
+{
+	return (((reg >= 0x18) && (reg < 0x34)) ||
+		((reg >= 0x158) && (reg < 0x178)));
+}
+
+static int workaround_5945(struct pci_bus *bus, unsigned int devfn,
+			   int offset, int len, u32 *val)
+{
+	struct pci_controller *hose;
+	void volatile __iomem *addr, *dummy;
+	int byte;
+	u32 tmp;
+
+	if (!is_root_port(bus->number, devfn) || !is_5945_reg(offset))
+		return 0;
+
+	hose = pci_bus_to_host(bus);
+
+	addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset & ~0x3);
+	byte = offset & 0x3;
+
+	/* Workaround bug 5945: write 0 to a dummy register before reading,
+	 * and write back what we read. We must read/write the full 32-bit
+	 * contents so we need to shift and mask by hand.
+	 */
+	dummy = pa_pxp_cfg_addr(hose, bus->number, devfn, 0x10);
+	out_le32(dummy, 0);
+	tmp = in_le32(addr);
+	out_le32(addr, tmp);
+
+	switch (len) {
+	case 1:
+		*val = (tmp >> (8*byte)) & 0xff;
+		break;
+	case 2:
+		if (byte == 0)
+			*val = tmp & 0xffff;
+		else
+			*val = (tmp >> 16) & 0xffff;
+		break;
+	default:
+		*val = tmp;
+		break;
+	}
+
+	return 1;
+}
+
+#ifdef CONFIG_PPC_PASEMI_NEMO
+#define PXP_ERR_CFG_REG	0x4
+#define PXP_IGNORE_PCIE_ERRORS	0x800
+#define SB600_BUS 5
+
+static void sb600_set_flag(int bus)
+{
+	static void __iomem *iob_mapbase = NULL;
+	struct resource res;
+	struct device_node *dn;
+	int err;
+
+	if (iob_mapbase == NULL) {
+		dn = of_find_compatible_node(NULL, "isa", "pasemi,1682m-iob");
+		if (!dn) {
+			pr_crit("NEMO SB600 missing iob node\n");
+			return;
+		}
+
+		err = of_address_to_resource(dn, 0, &res);
+		of_node_put(dn);
+
+		if (err) {
+			pr_crit("NEMO SB600 missing resource\n");
+			return;
+		}
+
+		pr_info("NEMO SB600 IOB base %08llx\n",res.start);
+
+		iob_mapbase = ioremap(res.start + 0x100, 0x94);
+	}
+
+	if (iob_mapbase != NULL) {
+		if (bus == SB600_BUS) {
+			/*
+			 * This is the SB600's bus, tell the PCI-e root port
+			 * to allow non-zero devices to enumerate.
+			 */
+			out_le32(iob_mapbase + PXP_ERR_CFG_REG, in_le32(iob_mapbase + PXP_ERR_CFG_REG) | PXP_IGNORE_PCIE_ERRORS);
+		} else {
+			/*
+			 * Only scan device 0 on other busses
+			 */
+			out_le32(iob_mapbase + PXP_ERR_CFG_REG, in_le32(iob_mapbase + PXP_ERR_CFG_REG) & ~PXP_IGNORE_PCIE_ERRORS);
+		}
+	}
+}
+
+#else
+
+static void sb600_set_flag(int bus)
+{
+}
+#endif
+
+static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn,
+			      int offset, int len, u32 *val)
+{
+	struct pci_controller *hose;
+	void volatile __iomem *addr;
+
+	hose = pci_bus_to_host(bus);
+	if (!hose)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (!pa_pxp_offset_valid(bus->number, devfn, offset))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (workaround_5945(bus, devfn, offset, len, val))
+		return PCIBIOS_SUCCESSFUL;
+
+	addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset);
+
+	sb600_set_flag(bus->number);
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	switch (len) {
+	case 1:
+		*val = in_8(addr);
+		break;
+	case 2:
+		*val = in_le16(addr);
+		break;
+	default:
+		*val = in_le32(addr);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pa_pxp_write_config(struct pci_bus *bus, unsigned int devfn,
+			       int offset, int len, u32 val)
+{
+	struct pci_controller *hose;
+	void volatile __iomem *addr;
+
+	hose = pci_bus_to_host(bus);
+	if (!hose)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (!pa_pxp_offset_valid(bus->number, devfn, offset))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset);
+
+	sb600_set_flag(bus->number);
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	switch (len) {
+	case 1:
+		out_8(addr, val);
+		break;
+	case 2:
+		out_le16(addr, val);
+		break;
+	default:
+		out_le32(addr, val);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pa_pxp_ops = {
+	.read = pa_pxp_read_config,
+	.write = pa_pxp_write_config,
+};
+
+static void __init setup_pa_pxp(struct pci_controller *hose)
+{
+	hose->ops = &pa_pxp_ops;
+	hose->cfg_data = ioremap(0xe0000000, 0x10000000);
+}
+
+static int __init pas_add_bridge(struct device_node *dev)
+{
+	struct pci_controller *hose;
+
+	pr_debug("Adding PCI host bridge %pOF\n", dev);
+
+	hose = pcibios_alloc_controller(dev);
+	if (!hose)
+		return -ENOMEM;
+
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+	hose->controller_ops = pasemi_pci_controller_ops;
+
+	setup_pa_pxp(hose);
+
+	pr_info("Found PA-PXP PCI host bridge.\n");
+
+	/* Interpret the "ranges" property */
+	pci_process_bridge_OF_ranges(hose, dev, 1);
+
+	/*
+	 * Scan for an isa bridge. This is needed to find the SB600 on the nemo
+	 * and does nothing on machines without one.
+	 */
+	isa_bridge_find_early(hose);
+
+	return 0;
+}
+
+void __init pas_pci_init(void)
+{
+	struct device_node *np;
+	int res;
+
+	pci_set_flags(PCI_SCAN_ALL_PCIE_DEVS);
+
+	np = of_find_compatible_node(of_root, NULL, "pasemi,rootbus");
+	if (np) {
+		res = pas_add_bridge(np);
+		of_node_put(np);
+	}
+}
+
+void __iomem *__init pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset)
+{
+	struct pci_controller *hose;
+
+	hose = pci_bus_to_host(dev->bus);
+
+	return (void __iomem *)pa_pxp_cfg_addr(hose, dev->bus->number, dev->devfn, offset);
+}
+
+struct pci_controller_ops pasemi_pci_controller_ops;