Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 340 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/powernv/opal-elog.c b/arch/powerpc/platforms/powernv/opal-elog.c
new file mode 100644
index 000000000..554fdd7f8
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-elog.c
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Error log support on PowerNV.
+ *
+ * Copyright 2013,2014 IBM Corp.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/fs.h>
+#include <linux/vmalloc.h>
+#include <linux/fcntl.h>
+#include <linux/kobject.h>
+#include <linux/uaccess.h>
+#include <asm/opal.h>
+
+struct elog_obj {
+	struct kobject kobj;
+	struct bin_attribute raw_attr;
+	uint64_t id;
+	uint64_t type;
+	size_t size;
+	char *buffer;
+};
+#define to_elog_obj(x) container_of(x, struct elog_obj, kobj)
+
+struct elog_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct elog_obj *elog, struct elog_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct elog_obj *elog, struct elog_attribute *attr,
+			 const char *buf, size_t count);
+};
+#define to_elog_attr(x) container_of(x, struct elog_attribute, attr)
+
+static ssize_t elog_id_show(struct elog_obj *elog_obj,
+			    struct elog_attribute *attr,
+			    char *buf)
+{
+	return sprintf(buf, "0x%llx\n", elog_obj->id);
+}
+
+static const char *elog_type_to_string(uint64_t type)
+{
+	switch (type) {
+	case 0: return "PEL";
+	default: return "unknown";
+	}
+}
+
+static ssize_t elog_type_show(struct elog_obj *elog_obj,
+			      struct elog_attribute *attr,
+			      char *buf)
+{
+	return sprintf(buf, "0x%llx %s\n",
+		       elog_obj->type,
+		       elog_type_to_string(elog_obj->type));
+}
+
+static ssize_t elog_ack_show(struct elog_obj *elog_obj,
+			     struct elog_attribute *attr,
+			     char *buf)
+{
+	return sprintf(buf, "ack - acknowledge log message\n");
+}
+
+static ssize_t elog_ack_store(struct elog_obj *elog_obj,
+			      struct elog_attribute *attr,
+			      const char *buf,
+			      size_t count)
+{
+	/*
+	 * Try to self remove this attribute. If we are successful,
+	 * delete the kobject itself.
+	 */
+	if (sysfs_remove_file_self(&elog_obj->kobj, &attr->attr)) {
+		opal_send_ack_elog(elog_obj->id);
+		kobject_put(&elog_obj->kobj);
+	}
+	return count;
+}
+
+static struct elog_attribute id_attribute =
+	__ATTR(id, 0444, elog_id_show, NULL);
+static struct elog_attribute type_attribute =
+	__ATTR(type, 0444, elog_type_show, NULL);
+static struct elog_attribute ack_attribute =
+	__ATTR(acknowledge, 0660, elog_ack_show, elog_ack_store);
+
+static struct kset *elog_kset;
+
+static ssize_t elog_attr_show(struct kobject *kobj,
+			      struct attribute *attr,
+			      char *buf)
+{
+	struct elog_attribute *attribute;
+	struct elog_obj *elog;
+
+	attribute = to_elog_attr(attr);
+	elog = to_elog_obj(kobj);
+
+	if (!attribute->show)
+		return -EIO;
+
+	return attribute->show(elog, attribute, buf);
+}
+
+static ssize_t elog_attr_store(struct kobject *kobj,
+			       struct attribute *attr,
+			       const char *buf, size_t len)
+{
+	struct elog_attribute *attribute;
+	struct elog_obj *elog;
+
+	attribute = to_elog_attr(attr);
+	elog = to_elog_obj(kobj);
+
+	if (!attribute->store)
+		return -EIO;
+
+	return attribute->store(elog, attribute, buf, len);
+}
+
+static const struct sysfs_ops elog_sysfs_ops = {
+	.show = elog_attr_show,
+	.store = elog_attr_store,
+};
+
+static void elog_release(struct kobject *kobj)
+{
+	struct elog_obj *elog;
+
+	elog = to_elog_obj(kobj);
+	kfree(elog->buffer);
+	kfree(elog);
+}
+
+static struct attribute *elog_default_attrs[] = {
+	&id_attribute.attr,
+	&type_attribute.attr,
+	&ack_attribute.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(elog_default);
+
+static struct kobj_type elog_ktype = {
+	.sysfs_ops = &elog_sysfs_ops,
+	.release = &elog_release,
+	.default_groups = elog_default_groups,
+};
+
+/* Maximum size of a single log on FSP is 16KB */
+#define OPAL_MAX_ERRLOG_SIZE	16384
+
+static ssize_t raw_attr_read(struct file *filep, struct kobject *kobj,
+			     struct bin_attribute *bin_attr,
+			     char *buffer, loff_t pos, size_t count)
+{
+	int opal_rc;
+
+	struct elog_obj *elog = to_elog_obj(kobj);
+
+	/* We may have had an error reading before, so let's retry */
+	if (!elog->buffer) {
+		elog->buffer = kzalloc(elog->size, GFP_KERNEL);
+		if (!elog->buffer)
+			return -EIO;
+
+		opal_rc = opal_read_elog(__pa(elog->buffer),
+					 elog->size, elog->id);
+		if (opal_rc != OPAL_SUCCESS) {
+			pr_err_ratelimited("ELOG: log read failed for log-id=%llx\n",
+					   elog->id);
+			kfree(elog->buffer);
+			elog->buffer = NULL;
+			return -EIO;
+		}
+	}
+
+	memcpy(buffer, elog->buffer + pos, count);
+
+	return count;
+}
+
+static void create_elog_obj(uint64_t id, size_t size, uint64_t type)
+{
+	struct elog_obj *elog;
+	int rc;
+
+	elog = kzalloc(sizeof(*elog), GFP_KERNEL);
+	if (!elog)
+		return;
+
+	elog->kobj.kset = elog_kset;
+
+	kobject_init(&elog->kobj, &elog_ktype);
+
+	sysfs_bin_attr_init(&elog->raw_attr);
+
+	elog->raw_attr.attr.name = "raw";
+	elog->raw_attr.attr.mode = 0400;
+	elog->raw_attr.size = size;
+	elog->raw_attr.read = raw_attr_read;
+
+	elog->id = id;
+	elog->size = size;
+	elog->type = type;
+
+	elog->buffer = kzalloc(elog->size, GFP_KERNEL);
+
+	if (elog->buffer) {
+		rc = opal_read_elog(__pa(elog->buffer),
+					 elog->size, elog->id);
+		if (rc != OPAL_SUCCESS) {
+			pr_err("ELOG: log read failed for log-id=%llx\n",
+			       elog->id);
+			kfree(elog->buffer);
+			elog->buffer = NULL;
+		}
+	}
+
+	rc = kobject_add(&elog->kobj, NULL, "0x%llx", id);
+	if (rc) {
+		kobject_put(&elog->kobj);
+		return;
+	}
+
+	/*
+	 * As soon as the sysfs file for this elog is created/activated there is
+	 * a chance the opal_errd daemon (or any userspace) might read and
+	 * acknowledge the elog before kobject_uevent() is called. If that
+	 * happens then there is a potential race between
+	 * elog_ack_store->kobject_put() and kobject_uevent() which leads to a
+	 * use-after-free of a kernfs object resulting in a kernel crash.
+	 *
+	 * To avoid that, we need to take a reference on behalf of the bin file,
+	 * so that our reference remains valid while we call kobject_uevent().
+	 * We then drop our reference before exiting the function, leaving the
+	 * bin file to drop the last reference (if it hasn't already).
+	 */
+
+	/* Take a reference for the bin file */
+	kobject_get(&elog->kobj);
+	rc = sysfs_create_bin_file(&elog->kobj, &elog->raw_attr);
+	if (rc == 0) {
+		kobject_uevent(&elog->kobj, KOBJ_ADD);
+	} else {
+		/* Drop the reference taken for the bin file */
+		kobject_put(&elog->kobj);
+	}
+
+	/* Drop our reference */
+	kobject_put(&elog->kobj);
+
+	return;
+}
+
+static irqreturn_t elog_event(int irq, void *data)
+{
+	__be64 size;
+	__be64 id;
+	__be64 type;
+	uint64_t elog_size;
+	uint64_t log_id;
+	uint64_t elog_type;
+	int rc;
+	char name[2+16+1];
+	struct kobject *kobj;
+
+	rc = opal_get_elog_size(&id, &size, &type);
+	if (rc != OPAL_SUCCESS) {
+		pr_err("ELOG: OPAL log info read failed\n");
+		return IRQ_HANDLED;
+	}
+
+	elog_size = be64_to_cpu(size);
+	log_id = be64_to_cpu(id);
+	elog_type = be64_to_cpu(type);
+
+	WARN_ON(elog_size > OPAL_MAX_ERRLOG_SIZE);
+
+	if (elog_size >= OPAL_MAX_ERRLOG_SIZE)
+		elog_size  =  OPAL_MAX_ERRLOG_SIZE;
+
+	sprintf(name, "0x%llx", log_id);
+
+	/* we may get notified twice, let's handle
+	 * that gracefully and not create two conflicting
+	 * entries.
+	 */
+	kobj = kset_find_obj(elog_kset, name);
+	if (kobj) {
+		/* Drop reference added by kset_find_obj() */
+		kobject_put(kobj);
+		return IRQ_HANDLED;
+	}
+
+	create_elog_obj(log_id, elog_size, elog_type);
+
+	return IRQ_HANDLED;
+}
+
+int __init opal_elog_init(void)
+{
+	int rc = 0, irq;
+
+	/* ELOG not supported by firmware */
+	if (!opal_check_token(OPAL_ELOG_READ))
+		return -1;
+
+	elog_kset = kset_create_and_add("elog", NULL, opal_kobj);
+	if (!elog_kset) {
+		pr_warn("%s: failed to create elog kset\n", __func__);
+		return -1;
+	}
+
+	irq = opal_event_request(ilog2(OPAL_EVENT_ERROR_LOG_AVAIL));
+	if (!irq) {
+		pr_err("%s: Can't register OPAL event irq (%d)\n",
+		       __func__, irq);
+		return irq;
+	}
+
+	rc = request_threaded_irq(irq, NULL, elog_event,
+			IRQF_TRIGGER_HIGH | IRQF_ONESHOT, "opal-elog", NULL);
+	if (rc) {
+		pr_err("%s: Can't request OPAL event irq (%d)\n",
+		       __func__, rc);
+		return rc;
+	}
+
+	/* We are now ready to pull error logs from opal. */
+	if (opal_check_token(OPAL_ELOG_RESEND))
+		opal_resend_pending_logs();
+
+	return 0;
+}