Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 161 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/powernv/opal-msglog.c b/arch/powerpc/platforms/powernv/opal-msglog.c
new file mode 100644
index 000000000..22d6efe17
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-msglog.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PowerNV OPAL in-memory console interface
+ *
+ * Copyright 2014 IBM Corp.
+ */
+
+#include <asm/io.h>
+#include <asm/opal.h>
+#include <linux/debugfs.h>
+#include <linux/of.h>
+#include <linux/types.h>
+#include <asm/barrier.h>
+
+#include "powernv.h"
+
+/* OPAL in-memory console. Defined in OPAL source at core/console.c */
+struct memcons {
+	__be64 magic;
+#define MEMCONS_MAGIC	0x6630696567726173L
+	__be64 obuf_phys;
+	__be64 ibuf_phys;
+	__be32 obuf_size;
+	__be32 ibuf_size;
+	__be32 out_pos;
+#define MEMCONS_OUT_POS_WRAP	0x80000000u
+#define MEMCONS_OUT_POS_MASK	0x00ffffffu
+	__be32 in_prod;
+	__be32 in_cons;
+};
+
+static struct memcons *opal_memcons = NULL;
+
+ssize_t memcons_copy(struct memcons *mc, char *to, loff_t pos, size_t count)
+{
+	const char *conbuf;
+	ssize_t ret;
+	size_t first_read = 0;
+	uint32_t out_pos, avail;
+
+	if (!mc)
+		return -ENODEV;
+
+	out_pos = be32_to_cpu(READ_ONCE(mc->out_pos));
+
+	/* Now we've read out_pos, put a barrier in before reading the new
+	 * data it points to in conbuf. */
+	smp_rmb();
+
+	conbuf = phys_to_virt(be64_to_cpu(mc->obuf_phys));
+
+	/* When the buffer has wrapped, read from the out_pos marker to the end
+	 * of the buffer, and then read the remaining data as in the un-wrapped
+	 * case. */
+	if (out_pos & MEMCONS_OUT_POS_WRAP) {
+
+		out_pos &= MEMCONS_OUT_POS_MASK;
+		avail = be32_to_cpu(mc->obuf_size) - out_pos;
+
+		ret = memory_read_from_buffer(to, count, &pos,
+				conbuf + out_pos, avail);
+
+		if (ret < 0)
+			goto out;
+
+		first_read = ret;
+		to += first_read;
+		count -= first_read;
+		pos -= avail;
+
+		if (count <= 0)
+			goto out;
+	}
+
+	/* Sanity check. The firmware should not do this to us. */
+	if (out_pos > be32_to_cpu(mc->obuf_size)) {
+		pr_err("OPAL: memory console corruption. Aborting read.\n");
+		return -EINVAL;
+	}
+
+	ret = memory_read_from_buffer(to, count, &pos, conbuf, out_pos);
+
+	if (ret < 0)
+		goto out;
+
+	ret += first_read;
+out:
+	return ret;
+}
+
+ssize_t opal_msglog_copy(char *to, loff_t pos, size_t count)
+{
+	return memcons_copy(opal_memcons, to, pos, count);
+}
+
+static ssize_t opal_msglog_read(struct file *file, struct kobject *kobj,
+				struct bin_attribute *bin_attr, char *to,
+				loff_t pos, size_t count)
+{
+	return opal_msglog_copy(to, pos, count);
+}
+
+static struct bin_attribute opal_msglog_attr = {
+	.attr = {.name = "msglog", .mode = 0400},
+	.read = opal_msglog_read
+};
+
+struct memcons *__init memcons_init(struct device_node *node, const char *mc_prop_name)
+{
+	u64 mcaddr;
+	struct memcons *mc;
+
+	if (of_property_read_u64(node, mc_prop_name, &mcaddr)) {
+		pr_warn("%s property not found, no message log\n",
+			mc_prop_name);
+		goto out_err;
+	}
+
+	mc = phys_to_virt(mcaddr);
+	if (!mc) {
+		pr_warn("memory console address is invalid\n");
+		goto out_err;
+	}
+
+	if (be64_to_cpu(mc->magic) != MEMCONS_MAGIC) {
+		pr_warn("memory console version is invalid\n");
+		goto out_err;
+	}
+
+	return mc;
+
+out_err:
+	return NULL;
+}
+
+u32 __init memcons_get_size(struct memcons *mc)
+{
+	return be32_to_cpu(mc->ibuf_size) + be32_to_cpu(mc->obuf_size);
+}
+
+void __init opal_msglog_init(void)
+{
+	opal_memcons = memcons_init(opal_node, "ibm,opal-memcons");
+	if (!opal_memcons) {
+		pr_warn("OPAL: memcons failed to load from ibm,opal-memcons\n");
+		return;
+	}
+
+	opal_msglog_attr.size = memcons_get_size(opal_memcons);
+}
+
+void __init opal_msglog_sysfs_init(void)
+{
+	if (!opal_memcons) {
+		pr_warn("OPAL: message log initialisation failed, not creating sysfs entry\n");
+		return;
+	}
+
+	if (sysfs_create_bin_file(opal_kobj, &opal_msglog_attr) != 0)
+		pr_warn("OPAL: sysfs file creation failed\n");
+}