Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 598 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
new file mode 100644
index 000000000..61ab2d38f
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -0,0 +1,598 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PowerNV setup code.
+ *
+ * Copyright 2011 IBM Corp.
+ */
+
+#undef DEBUG
+
+#include <linux/cpu.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_buf.h>
+#include <linux/seq_file.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/interrupt.h>
+#include <linux/bug.h>
+#include <linux/pci.h>
+#include <linux/cpufreq.h>
+#include <linux/memblock.h>
+
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+#include <asm/xics.h>
+#include <asm/xive.h>
+#include <asm/opal.h>
+#include <asm/kexec.h>
+#include <asm/smp.h>
+#include <asm/tm.h>
+#include <asm/setup.h>
+#include <asm/security_features.h>
+
+#include "powernv.h"
+
+
+static bool __init fw_feature_is(const char *state, const char *name,
+			  struct device_node *fw_features)
+{
+	struct device_node *np;
+	bool rc = false;
+
+	np = of_get_child_by_name(fw_features, name);
+	if (np) {
+		rc = of_property_read_bool(np, state);
+		of_node_put(np);
+	}
+
+	return rc;
+}
+
+static void __init init_fw_feat_flags(struct device_node *np)
+{
+	if (fw_feature_is("enabled", "inst-spec-barrier-ori31,31,0", np))
+		security_ftr_set(SEC_FTR_SPEC_BAR_ORI31);
+
+	if (fw_feature_is("enabled", "fw-bcctrl-serialized", np))
+		security_ftr_set(SEC_FTR_BCCTRL_SERIALISED);
+
+	if (fw_feature_is("enabled", "inst-l1d-flush-ori30,30,0", np))
+		security_ftr_set(SEC_FTR_L1D_FLUSH_ORI30);
+
+	if (fw_feature_is("enabled", "inst-l1d-flush-trig2", np))
+		security_ftr_set(SEC_FTR_L1D_FLUSH_TRIG2);
+
+	if (fw_feature_is("enabled", "fw-l1d-thread-split", np))
+		security_ftr_set(SEC_FTR_L1D_THREAD_PRIV);
+
+	if (fw_feature_is("enabled", "fw-count-cache-disabled", np))
+		security_ftr_set(SEC_FTR_COUNT_CACHE_DISABLED);
+
+	if (fw_feature_is("enabled", "fw-count-cache-flush-bcctr2,0,0", np))
+		security_ftr_set(SEC_FTR_BCCTR_FLUSH_ASSIST);
+
+	if (fw_feature_is("enabled", "needs-count-cache-flush-on-context-switch", np))
+		security_ftr_set(SEC_FTR_FLUSH_COUNT_CACHE);
+
+	/*
+	 * The features below are enabled by default, so we instead look to see
+	 * if firmware has *disabled* them, and clear them if so.
+	 */
+	if (fw_feature_is("disabled", "speculation-policy-favor-security", np))
+		security_ftr_clear(SEC_FTR_FAVOUR_SECURITY);
+
+	if (fw_feature_is("disabled", "needs-l1d-flush-msr-pr-0-to-1", np))
+		security_ftr_clear(SEC_FTR_L1D_FLUSH_PR);
+
+	if (fw_feature_is("disabled", "needs-l1d-flush-msr-hv-1-to-0", np))
+		security_ftr_clear(SEC_FTR_L1D_FLUSH_HV);
+
+	if (fw_feature_is("disabled", "needs-spec-barrier-for-bound-checks", np))
+		security_ftr_clear(SEC_FTR_BNDS_CHK_SPEC_BAR);
+
+	if (fw_feature_is("enabled", "no-need-l1d-flush-msr-pr-1-to-0", np))
+		security_ftr_clear(SEC_FTR_L1D_FLUSH_ENTRY);
+
+	if (fw_feature_is("enabled", "no-need-l1d-flush-kernel-on-user-access", np))
+		security_ftr_clear(SEC_FTR_L1D_FLUSH_UACCESS);
+
+	if (fw_feature_is("enabled", "no-need-store-drain-on-priv-state-switch", np))
+		security_ftr_clear(SEC_FTR_STF_BARRIER);
+}
+
+static void __init pnv_setup_security_mitigations(void)
+{
+	struct device_node *np, *fw_features;
+	enum l1d_flush_type type;
+	bool enable;
+
+	/* Default to fallback in case fw-features are not available */
+	type = L1D_FLUSH_FALLBACK;
+
+	np = of_find_node_by_name(NULL, "ibm,opal");
+	fw_features = of_get_child_by_name(np, "fw-features");
+	of_node_put(np);
+
+	if (fw_features) {
+		init_fw_feat_flags(fw_features);
+		of_node_put(fw_features);
+
+		if (security_ftr_enabled(SEC_FTR_L1D_FLUSH_TRIG2))
+			type = L1D_FLUSH_MTTRIG;
+
+		if (security_ftr_enabled(SEC_FTR_L1D_FLUSH_ORI30))
+			type = L1D_FLUSH_ORI;
+	}
+
+	/*
+	 * The issues addressed by the entry and uaccess flush don't affect P7
+	 * or P8, so on bare metal disable them explicitly in case firmware does
+	 * not include the features to disable them. POWER9 and newer processors
+	 * should have the appropriate firmware flags.
+	 */
+	if (pvr_version_is(PVR_POWER7) || pvr_version_is(PVR_POWER7p) ||
+	    pvr_version_is(PVR_POWER8E) || pvr_version_is(PVR_POWER8NVL) ||
+	    pvr_version_is(PVR_POWER8)) {
+		security_ftr_clear(SEC_FTR_L1D_FLUSH_ENTRY);
+		security_ftr_clear(SEC_FTR_L1D_FLUSH_UACCESS);
+	}
+
+	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \
+		 (security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR)   || \
+		  security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV));
+
+	setup_rfi_flush(type, enable);
+	setup_count_cache_flush();
+
+	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+		 security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
+	setup_entry_flush(enable);
+
+	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+		 security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS);
+	setup_uaccess_flush(enable);
+
+	setup_stf_barrier();
+}
+
+static void __init pnv_check_guarded_cores(void)
+{
+	struct device_node *dn;
+	int bad_count = 0;
+
+	for_each_node_by_type(dn, "cpu") {
+		if (of_property_match_string(dn, "status", "bad") >= 0)
+			bad_count++;
+	}
+
+	if (bad_count) {
+		printk("  _     _______________\n");
+		pr_cont(" | |   /               \\\n");
+		pr_cont(" | |   |    WARNING!   |\n");
+		pr_cont(" | |   |               |\n");
+		pr_cont(" | |   | It looks like |\n");
+		pr_cont(" |_|   |  you have %*d |\n", 3, bad_count);
+		pr_cont("  _    | guarded cores |\n");
+		pr_cont(" (_)   \\_______________/\n");
+	}
+}
+
+static void __init pnv_setup_arch(void)
+{
+	set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT);
+
+	pnv_setup_security_mitigations();
+
+	/* Initialize SMP */
+	pnv_smp_init();
+
+	/* Setup RTC and NVRAM callbacks */
+	if (firmware_has_feature(FW_FEATURE_OPAL))
+		opal_nvram_init();
+
+	/* Enable NAP mode */
+	powersave_nap = 1;
+
+	pnv_check_guarded_cores();
+
+	/* XXX PMCS */
+
+	pnv_rng_init();
+}
+
+static void __init pnv_add_hw_description(void)
+{
+	struct device_node *dn;
+	const char *s;
+
+	dn = of_find_node_by_path("/ibm,opal/firmware");
+	if (!dn)
+		return;
+
+	if (of_property_read_string(dn, "version", &s) == 0 ||
+	    of_property_read_string(dn, "git-id", &s) == 0)
+		seq_buf_printf(&ppc_hw_desc, "opal:%s ", s);
+
+	if (of_property_read_string(dn, "mi-version", &s) == 0)
+		seq_buf_printf(&ppc_hw_desc, "mi:%s ", s);
+
+	of_node_put(dn);
+}
+
+static void __init pnv_init(void)
+{
+	pnv_add_hw_description();
+
+	/*
+	 * Initialize the LPC bus now so that legacy serial
+	 * ports can be found on it
+	 */
+	opal_lpc_init();
+
+#ifdef CONFIG_HVC_OPAL
+	if (firmware_has_feature(FW_FEATURE_OPAL))
+		hvc_opal_init_early();
+	else
+#endif
+		add_preferred_console("hvc", 0, NULL);
+
+#ifdef CONFIG_PPC_64S_HASH_MMU
+	if (!radix_enabled()) {
+		size_t size = sizeof(struct slb_entry) * mmu_slb_size;
+		int i;
+
+		/* Allocate per cpu area to save old slb contents during MCE */
+		for_each_possible_cpu(i) {
+			paca_ptrs[i]->mce_faulty_slbs =
+					memblock_alloc_node(size,
+						__alignof__(struct slb_entry),
+						cpu_to_node(i));
+		}
+	}
+#endif
+}
+
+static void __init pnv_init_IRQ(void)
+{
+	/* Try using a XIVE if available, otherwise use a XICS */
+	if (!xive_native_init())
+		xics_init();
+
+	WARN_ON(!ppc_md.get_irq);
+}
+
+static void pnv_show_cpuinfo(struct seq_file *m)
+{
+	struct device_node *root;
+	const char *model = "";
+
+	root = of_find_node_by_path("/");
+	if (root)
+		model = of_get_property(root, "model", NULL);
+	seq_printf(m, "machine\t\t: PowerNV %s\n", model);
+	if (firmware_has_feature(FW_FEATURE_OPAL))
+		seq_printf(m, "firmware\t: OPAL\n");
+	else
+		seq_printf(m, "firmware\t: BML\n");
+	of_node_put(root);
+	if (radix_enabled())
+		seq_printf(m, "MMU\t\t: Radix\n");
+	else
+		seq_printf(m, "MMU\t\t: Hash\n");
+}
+
+static void pnv_prepare_going_down(void)
+{
+	/*
+	 * Disable all notifiers from OPAL, we can't
+	 * service interrupts anymore anyway
+	 */
+	opal_event_shutdown();
+
+	/* Print flash update message if one is scheduled. */
+	opal_flash_update_print_message();
+
+	smp_send_stop();
+
+	hard_irq_disable();
+}
+
+static void  __noreturn pnv_restart(char *cmd)
+{
+	long rc;
+
+	pnv_prepare_going_down();
+
+	do {
+		if (!cmd || !strlen(cmd))
+			rc = opal_cec_reboot();
+		else if (strcmp(cmd, "full") == 0)
+			rc = opal_cec_reboot2(OPAL_REBOOT_FULL_IPL, NULL);
+		else if (strcmp(cmd, "mpipl") == 0)
+			rc = opal_cec_reboot2(OPAL_REBOOT_MPIPL, NULL);
+		else if (strcmp(cmd, "error") == 0)
+			rc = opal_cec_reboot2(OPAL_REBOOT_PLATFORM_ERROR, NULL);
+		else if (strcmp(cmd, "fast") == 0)
+			rc = opal_cec_reboot2(OPAL_REBOOT_FAST, NULL);
+		else
+			rc = OPAL_UNSUPPORTED;
+
+		if (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+			/* Opal is busy wait for some time and retry */
+			opal_poll_events(NULL);
+			mdelay(10);
+
+		} else	if (cmd && rc) {
+			/* Unknown error while issuing reboot */
+			if (rc == OPAL_UNSUPPORTED)
+				pr_err("Unsupported '%s' reboot.\n", cmd);
+			else
+				pr_err("Unable to issue '%s' reboot. Err=%ld\n",
+				       cmd, rc);
+			pr_info("Forcing a cec-reboot\n");
+			cmd = NULL;
+			rc = OPAL_BUSY;
+
+		} else if (rc != OPAL_SUCCESS) {
+			/* Unknown error while issuing cec-reboot */
+			pr_err("Unable to reboot. Err=%ld\n", rc);
+		}
+
+	} while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT);
+
+	for (;;)
+		opal_poll_events(NULL);
+}
+
+static void __noreturn pnv_power_off(void)
+{
+	long rc = OPAL_BUSY;
+
+	pnv_prepare_going_down();
+
+	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+		rc = opal_cec_power_down(0);
+		if (rc == OPAL_BUSY_EVENT)
+			opal_poll_events(NULL);
+		else
+			mdelay(10);
+	}
+	for (;;)
+		opal_poll_events(NULL);
+}
+
+static void __noreturn pnv_halt(void)
+{
+	pnv_power_off();
+}
+
+static void pnv_progress(char *s, unsigned short hex)
+{
+}
+
+static void pnv_shutdown(void)
+{
+	/* Let the PCI code clear up IODA tables */
+	pnv_pci_shutdown();
+
+	/*
+	 * Stop OPAL activity: Unregister all OPAL interrupts so they
+	 * don't fire up while we kexec and make sure all potentially
+	 * DMA'ing ops are complete (such as dump retrieval).
+	 */
+	opal_shutdown();
+}
+
+#ifdef CONFIG_KEXEC_CORE
+static void pnv_kexec_wait_secondaries_down(void)
+{
+	int my_cpu, i, notified = -1;
+
+	my_cpu = get_cpu();
+
+	for_each_online_cpu(i) {
+		uint8_t status;
+		int64_t rc, timeout = 1000;
+
+		if (i == my_cpu)
+			continue;
+
+		for (;;) {
+			rc = opal_query_cpu_status(get_hard_smp_processor_id(i),
+						   &status);
+			if (rc != OPAL_SUCCESS || status != OPAL_THREAD_STARTED)
+				break;
+			barrier();
+			if (i != notified) {
+				printk(KERN_INFO "kexec: waiting for cpu %d "
+				       "(physical %d) to enter OPAL\n",
+				       i, paca_ptrs[i]->hw_cpu_id);
+				notified = i;
+			}
+
+			/*
+			 * On crash secondaries might be unreachable or hung,
+			 * so timeout if we've waited too long
+			 * */
+			mdelay(1);
+			if (timeout-- == 0) {
+				printk(KERN_ERR "kexec: timed out waiting for "
+				       "cpu %d (physical %d) to enter OPAL\n",
+				       i, paca_ptrs[i]->hw_cpu_id);
+				break;
+			}
+		}
+	}
+}
+
+static void pnv_kexec_cpu_down(int crash_shutdown, int secondary)
+{
+	u64 reinit_flags;
+
+	if (xive_enabled())
+		xive_teardown_cpu();
+	else
+		xics_kexec_teardown_cpu(secondary);
+
+	/* On OPAL, we return all CPUs to firmware */
+	if (!firmware_has_feature(FW_FEATURE_OPAL))
+		return;
+
+	if (secondary) {
+		/* Return secondary CPUs to firmware on OPAL v3 */
+		mb();
+		get_paca()->kexec_state = KEXEC_STATE_REAL_MODE;
+		mb();
+
+		/* Return the CPU to OPAL */
+		opal_return_cpu();
+	} else {
+		/* Primary waits for the secondaries to have reached OPAL */
+		pnv_kexec_wait_secondaries_down();
+
+		/* Switch XIVE back to emulation mode */
+		if (xive_enabled())
+			xive_shutdown();
+
+		/*
+		 * We might be running as little-endian - now that interrupts
+		 * are disabled, reset the HILE bit to big-endian so we don't
+		 * take interrupts in the wrong endian later
+		 *
+		 * We reinit to enable both radix and hash on P9 to ensure
+		 * the mode used by the next kernel is always supported.
+		 */
+		reinit_flags = OPAL_REINIT_CPUS_HILE_BE;
+		if (cpu_has_feature(CPU_FTR_ARCH_300))
+			reinit_flags |= OPAL_REINIT_CPUS_MMU_RADIX |
+				OPAL_REINIT_CPUS_MMU_HASH;
+		opal_reinit_cpus(reinit_flags);
+	}
+}
+#endif /* CONFIG_KEXEC_CORE */
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+static unsigned long pnv_memory_block_size(void)
+{
+	/*
+	 * We map the kernel linear region with 1GB large pages on radix. For
+	 * memory hot unplug to work our memory block size must be at least
+	 * this size.
+	 */
+	if (radix_enabled())
+		return radix_mem_block_size;
+	else
+		return 256UL * 1024 * 1024;
+}
+#endif
+
+static void __init pnv_setup_machdep_opal(void)
+{
+	ppc_md.get_boot_time = opal_get_boot_time;
+	ppc_md.restart = pnv_restart;
+	pm_power_off = pnv_power_off;
+	ppc_md.halt = pnv_halt;
+	/* ppc_md.system_reset_exception gets filled in by pnv_smp_init() */
+	ppc_md.machine_check_exception = opal_machine_check;
+	ppc_md.mce_check_early_recovery = opal_mce_check_early_recovery;
+	if (opal_check_token(OPAL_HANDLE_HMI2))
+		ppc_md.hmi_exception_early = opal_hmi_exception_early2;
+	else
+		ppc_md.hmi_exception_early = opal_hmi_exception_early;
+	ppc_md.handle_hmi_exception = opal_handle_hmi_exception;
+}
+
+static int __init pnv_probe(void)
+{
+	if (!of_machine_is_compatible("ibm,powernv"))
+		return 0;
+
+	if (firmware_has_feature(FW_FEATURE_OPAL))
+		pnv_setup_machdep_opal();
+
+	pr_debug("PowerNV detected !\n");
+
+	pnv_init();
+
+	return 1;
+}
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+void __init pnv_tm_init(void)
+{
+	if (!firmware_has_feature(FW_FEATURE_OPAL) ||
+	    !pvr_version_is(PVR_POWER9) ||
+	    early_cpu_has_feature(CPU_FTR_TM))
+		return;
+
+	if (opal_reinit_cpus(OPAL_REINIT_CPUS_TM_SUSPEND_DISABLED) != OPAL_SUCCESS)
+		return;
+
+	pr_info("Enabling TM (Transactional Memory) with Suspend Disabled\n");
+	cur_cpu_spec->cpu_features |= CPU_FTR_TM;
+	/* Make sure "normal" HTM is off (it should be) */
+	cur_cpu_spec->cpu_user_features2 &= ~PPC_FEATURE2_HTM;
+	/* Turn on no suspend mode, and HTM no SC */
+	cur_cpu_spec->cpu_user_features2 |= PPC_FEATURE2_HTM_NO_SUSPEND | \
+					    PPC_FEATURE2_HTM_NOSC;
+	tm_suspend_disabled = true;
+}
+#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
+
+/*
+ * Returns the cpu frequency for 'cpu' in Hz. This is used by
+ * /proc/cpuinfo
+ */
+static unsigned long pnv_get_proc_freq(unsigned int cpu)
+{
+	unsigned long ret_freq;
+
+	ret_freq = cpufreq_get(cpu) * 1000ul;
+
+	/*
+	 * If the backend cpufreq driver does not exist,
+         * then fallback to old way of reporting the clockrate.
+	 */
+	if (!ret_freq)
+		ret_freq = ppc_proc_freq;
+	return ret_freq;
+}
+
+static long pnv_machine_check_early(struct pt_regs *regs)
+{
+	long handled = 0;
+
+	if (cur_cpu_spec && cur_cpu_spec->machine_check_early)
+		handled = cur_cpu_spec->machine_check_early(regs);
+
+	return handled;
+}
+
+define_machine(powernv) {
+	.name			= "PowerNV",
+	.probe			= pnv_probe,
+	.setup_arch		= pnv_setup_arch,
+	.init_IRQ		= pnv_init_IRQ,
+	.show_cpuinfo		= pnv_show_cpuinfo,
+	.get_proc_freq          = pnv_get_proc_freq,
+	.discover_phbs		= pnv_pci_init,
+	.progress		= pnv_progress,
+	.machine_shutdown	= pnv_shutdown,
+	.power_save             = NULL,
+	.calibrate_decr		= generic_calibrate_decr,
+	.machine_check_early	= pnv_machine_check_early,
+#ifdef CONFIG_KEXEC_CORE
+	.kexec_cpu_down		= pnv_kexec_cpu_down,
+#endif
+#ifdef CONFIG_MEMORY_HOTPLUG
+	.memory_block_size	= pnv_memory_block_size,
+#endif
+};