Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 239 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/pseries/hvcserver.c b/arch/powerpc/platforms/pseries/hvcserver.c
new file mode 100644
index 000000000..d48c9c7ce
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/hvcserver.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * hvcserver.c
+ * Copyright (C) 2004 Ryan S Arnold, IBM Corporation
+ *
+ * PPC64 virtual I/O console server support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <asm/hvcall.h>
+#include <asm/hvcserver.h>
+#include <asm/io.h>
+
+#define HVCS_ARCH_VERSION "1.0.0"
+
+MODULE_AUTHOR("Ryan S. Arnold <rsa@us.ibm.com>");
+MODULE_DESCRIPTION("IBM hvcs ppc64 API");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(HVCS_ARCH_VERSION);
+
+/*
+ * Convert arch specific return codes into relevant errnos.  The hvcs
+ * functions aren't performance sensitive, so this conversion isn't an
+ * issue.
+ */
+static int hvcs_convert(long to_convert)
+{
+	switch (to_convert) {
+		case H_SUCCESS:
+			return 0;
+		case H_PARAMETER:
+			return -EINVAL;
+		case H_HARDWARE:
+			return -EIO;
+		case H_BUSY:
+		case H_LONG_BUSY_ORDER_1_MSEC:
+		case H_LONG_BUSY_ORDER_10_MSEC:
+		case H_LONG_BUSY_ORDER_100_MSEC:
+		case H_LONG_BUSY_ORDER_1_SEC:
+		case H_LONG_BUSY_ORDER_10_SEC:
+		case H_LONG_BUSY_ORDER_100_SEC:
+			return -EBUSY;
+		case H_FUNCTION:
+		default:
+			return -EPERM;
+	}
+}
+
+/**
+ * hvcs_free_partner_info - free pi allocated by hvcs_get_partner_info
+ * @head: list_head pointer for an allocated list of partner info structs to
+ *	free.
+ *
+ * This function is used to free the partner info list that was returned by
+ * calling hvcs_get_partner_info().
+ */
+int hvcs_free_partner_info(struct list_head *head)
+{
+	struct hvcs_partner_info *pi;
+	struct list_head *element;
+
+	if (!head)
+		return -EINVAL;
+
+	while (!list_empty(head)) {
+		element = head->next;
+		pi = list_entry(element, struct hvcs_partner_info, node);
+		list_del(element);
+		kfree(pi);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(hvcs_free_partner_info);
+
+/* Helper function for hvcs_get_partner_info */
+static int hvcs_next_partner(uint32_t unit_address,
+		unsigned long last_p_partition_ID,
+		unsigned long last_p_unit_address, unsigned long *pi_buff)
+
+{
+	long retval;
+	retval = plpar_hcall_norets(H_VTERM_PARTNER_INFO, unit_address,
+			last_p_partition_ID,
+				last_p_unit_address, virt_to_phys(pi_buff));
+	return hvcs_convert(retval);
+}
+
+/**
+ * hvcs_get_partner_info - Get all of the partner info for a vty-server adapter
+ * @unit_address: The unit_address of the vty-server adapter for which this
+ *	function is fetching partner info.
+ * @head: An initialized list_head pointer to an empty list to use to return the
+ *	list of partner info fetched from the hypervisor to the caller.
+ * @pi_buff: A page sized buffer pre-allocated prior to calling this function
+ *	that is to be used to be used by firmware as an iterator to keep track
+ *	of the partner info retrieval.
+ *
+ * This function returns non-zero on success, or if there is no partner info.
+ *
+ * The pi_buff is pre-allocated prior to calling this function because this
+ * function may be called with a spin_lock held and kmalloc of a page is not
+ * recommended as GFP_ATOMIC.
+ *
+ * The first long of this buffer is used to store a partner unit address.  The
+ * second long is used to store a partner partition ID and starting at
+ * pi_buff[2] is the 79 character Converged Location Code (diff size than the
+ * unsigned longs, hence the casting mumbo jumbo you see later).
+ *
+ * Invocation of this function should always be followed by an invocation of
+ * hvcs_free_partner_info() using a pointer to the SAME list head instance
+ * that was passed as a parameter to this function.
+ */
+int hvcs_get_partner_info(uint32_t unit_address, struct list_head *head,
+		unsigned long *pi_buff)
+{
+	/*
+	 * Dealt with as longs because of the hcall interface even though the
+	 * values are uint32_t.
+	 */
+	unsigned long	last_p_partition_ID;
+	unsigned long	last_p_unit_address;
+	struct hvcs_partner_info *next_partner_info = NULL;
+	int more = 1;
+	int retval;
+
+	/* invalid parameters */
+	if (!head || !pi_buff)
+		return -EINVAL;
+
+	memset(pi_buff, 0x00, PAGE_SIZE);
+	last_p_partition_ID = last_p_unit_address = ~0UL;
+	INIT_LIST_HEAD(head);
+
+	do {
+		retval = hvcs_next_partner(unit_address, last_p_partition_ID,
+				last_p_unit_address, pi_buff);
+		if (retval) {
+			/*
+			 * Don't indicate that we've failed if we have
+			 * any list elements.
+			 */
+			if (!list_empty(head))
+				return 0;
+			return retval;
+		}
+
+		last_p_partition_ID = be64_to_cpu(pi_buff[0]);
+		last_p_unit_address = be64_to_cpu(pi_buff[1]);
+
+		/* This indicates that there are no further partners */
+		if (last_p_partition_ID == ~0UL
+				&& last_p_unit_address == ~0UL)
+			break;
+
+		/* This is a very small struct and will be freed soon in
+		 * hvcs_free_partner_info(). */
+		next_partner_info = kmalloc(sizeof(struct hvcs_partner_info),
+				GFP_ATOMIC);
+
+		if (!next_partner_info) {
+			printk(KERN_WARNING "HVCONSOLE: kmalloc() failed to"
+				" allocate partner info struct.\n");
+			hvcs_free_partner_info(head);
+			return -ENOMEM;
+		}
+
+		next_partner_info->unit_address
+			= (unsigned int)last_p_unit_address;
+		next_partner_info->partition_ID
+			= (unsigned int)last_p_partition_ID;
+
+		/* copy the Null-term char too */
+		strscpy(&next_partner_info->location_code[0],
+			(char *)&pi_buff[2],
+			sizeof(next_partner_info->location_code));
+
+		list_add_tail(&(next_partner_info->node), head);
+		next_partner_info = NULL;
+
+	} while (more);
+
+	return 0;
+}
+EXPORT_SYMBOL(hvcs_get_partner_info);
+
+/**
+ * hvcs_register_connection - establish a connection between this vty-server and
+ *	a vty.
+ * @unit_address: The unit address of the vty-server adapter that is to be
+ *	establish a connection.
+ * @p_partition_ID: The partition ID of the vty adapter that is to be connected.
+ * @p_unit_address: The unit address of the vty adapter to which the vty-server
+ *	is to be connected.
+ *
+ * If this function is called once and -EINVAL is returned it may
+ * indicate that the partner info needs to be refreshed for the
+ * target unit address at which point the caller must invoke
+ * hvcs_get_partner_info() and then call this function again.  If,
+ * for a second time, -EINVAL is returned then it indicates that
+ * there is probably already a partner connection registered to a
+ * different vty-server adapter.  It is also possible that a second
+ * -EINVAL may indicate that one of the parms is not valid, for
+ * instance if the link was removed between the vty-server adapter
+ * and the vty adapter that you are trying to open.  Don't shoot the
+ * messenger.  Firmware implemented it this way.
+ */
+int hvcs_register_connection( uint32_t unit_address,
+		uint32_t p_partition_ID, uint32_t p_unit_address)
+{
+	long retval;
+	retval = plpar_hcall_norets(H_REGISTER_VTERM, unit_address,
+				p_partition_ID, p_unit_address);
+	return hvcs_convert(retval);
+}
+EXPORT_SYMBOL(hvcs_register_connection);
+
+/**
+ * hvcs_free_connection - free the connection between a vty-server and vty
+ * @unit_address: The unit address of the vty-server that is to have its
+ *	connection severed.
+ *
+ * This function is used to free the partner connection between a vty-server
+ * adapter and a vty adapter.
+ *
+ * If -EBUSY is returned continue to call this function until 0 is returned.
+ */
+int hvcs_free_connection(uint32_t unit_address)
+{
+	long retval;
+	retval = plpar_hcall_norets(H_FREE_VTERM, unit_address);
+	return hvcs_convert(retval);
+}
+EXPORT_SYMBOL(hvcs_free_connection);