Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 414 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
new file mode 100644
index 000000000..599bd2c78
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -0,0 +1,414 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pSeries_reconfig.c - support for dynamic reconfiguration (including PCI
+ * Hotplug and Dynamic Logical Partitioning on RPA platforms).
+ *
+ * Copyright (C) 2005 Nathan Lynch
+ * Copyright (C) 2005 IBM Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+#include <linux/proc_fs.h>
+#include <linux/security.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include <asm/machdep.h>
+#include <linux/uaccess.h>
+#include <asm/mmu.h>
+
+#include "of_helpers.h"
+
+static int pSeries_reconfig_add_node(const char *path, struct property *proplist)
+{
+	struct device_node *np;
+	int err = -ENOMEM;
+
+	np = kzalloc(sizeof(*np), GFP_KERNEL);
+	if (!np)
+		goto out_err;
+
+	np->full_name = kstrdup(kbasename(path), GFP_KERNEL);
+	if (!np->full_name)
+		goto out_err;
+
+	np->properties = proplist;
+	of_node_set_flag(np, OF_DYNAMIC);
+	of_node_init(np);
+
+	np->parent = pseries_of_derive_parent(path);
+	if (IS_ERR(np->parent)) {
+		err = PTR_ERR(np->parent);
+		goto out_err;
+	}
+
+	err = of_attach_node(np);
+	if (err) {
+		printk(KERN_ERR "Failed to add device node %s\n", path);
+		goto out_err;
+	}
+
+	of_node_put(np->parent);
+
+	return 0;
+
+out_err:
+	if (np) {
+		of_node_put(np->parent);
+		kfree(np->full_name);
+		kfree(np);
+	}
+	return err;
+}
+
+static int pSeries_reconfig_remove_node(struct device_node *np)
+{
+	struct device_node *parent, *child;
+
+	parent = of_get_parent(np);
+	if (!parent)
+		return -EINVAL;
+
+	if ((child = of_get_next_child(np, NULL))) {
+		of_node_put(child);
+		of_node_put(parent);
+		return -EBUSY;
+	}
+
+	of_detach_node(np);
+	of_node_put(parent);
+	return 0;
+}
+
+/*
+ * /proc/powerpc/ofdt - yucky binary interface for adding and removing
+ * OF device nodes.  Should be deprecated as soon as we get an
+ * in-kernel wrapper for the RTAS ibm,configure-connector call.
+ */
+
+static void release_prop_list(const struct property *prop)
+{
+	struct property *next;
+	for (; prop; prop = next) {
+		next = prop->next;
+		kfree(prop->name);
+		kfree(prop->value);
+		kfree(prop);
+	}
+
+}
+
+/**
+ * parse_next_property - process the next property from raw input buffer
+ * @buf: input buffer, must be nul-terminated
+ * @end: end of the input buffer + 1, for validation
+ * @name: return value; set to property name in buf
+ * @length: return value; set to length of value
+ * @value: return value; set to the property value in buf
+ *
+ * Note that the caller must make copies of the name and value returned,
+ * this function does no allocation or copying of the data.  Return value
+ * is set to the next name in buf, or NULL on error.
+ */
+static char * parse_next_property(char *buf, char *end, char **name, int *length,
+				  unsigned char **value)
+{
+	char *tmp;
+
+	*name = buf;
+
+	tmp = strchr(buf, ' ');
+	if (!tmp) {
+		printk(KERN_ERR "property parse failed in %s at line %d\n",
+		       __func__, __LINE__);
+		return NULL;
+	}
+	*tmp = '\0';
+
+	if (++tmp >= end) {
+		printk(KERN_ERR "property parse failed in %s at line %d\n",
+		       __func__, __LINE__);
+		return NULL;
+	}
+
+	/* now we're on the length */
+	*length = -1;
+	*length = simple_strtoul(tmp, &tmp, 10);
+	if (*length == -1) {
+		printk(KERN_ERR "property parse failed in %s at line %d\n",
+		       __func__, __LINE__);
+		return NULL;
+	}
+	if (*tmp != ' ' || ++tmp >= end) {
+		printk(KERN_ERR "property parse failed in %s at line %d\n",
+		       __func__, __LINE__);
+		return NULL;
+	}
+
+	/* now we're on the value */
+	*value = tmp;
+	tmp += *length;
+	if (tmp > end) {
+		printk(KERN_ERR "property parse failed in %s at line %d\n",
+		       __func__, __LINE__);
+		return NULL;
+	}
+	else if (tmp < end && *tmp != ' ' && *tmp != '\0') {
+		printk(KERN_ERR "property parse failed in %s at line %d\n",
+		       __func__, __LINE__);
+		return NULL;
+	}
+	tmp++;
+
+	/* and now we should be on the next name, or the end */
+	return tmp;
+}
+
+static struct property *new_property(const char *name, const int length,
+				     const unsigned char *value, struct property *last)
+{
+	struct property *new = kzalloc(sizeof(*new), GFP_KERNEL);
+
+	if (!new)
+		return NULL;
+
+	if (!(new->name = kstrdup(name, GFP_KERNEL)))
+		goto cleanup;
+	if (!(new->value = kmalloc(length + 1, GFP_KERNEL)))
+		goto cleanup;
+
+	memcpy(new->value, value, length);
+	*(((char *)new->value) + length) = 0;
+	new->length = length;
+	new->next = last;
+	return new;
+
+cleanup:
+	kfree(new->name);
+	kfree(new->value);
+	kfree(new);
+	return NULL;
+}
+
+static int do_add_node(char *buf, size_t bufsize)
+{
+	char *path, *end, *name;
+	struct device_node *np;
+	struct property *prop = NULL;
+	unsigned char* value;
+	int length, rv = 0;
+
+	end = buf + bufsize;
+	path = buf;
+	buf = strchr(buf, ' ');
+	if (!buf)
+		return -EINVAL;
+	*buf = '\0';
+	buf++;
+
+	if ((np = of_find_node_by_path(path))) {
+		of_node_put(np);
+		return -EINVAL;
+	}
+
+	/* rv = build_prop_list(tmp, bufsize - (tmp - buf), &proplist); */
+	while (buf < end &&
+	       (buf = parse_next_property(buf, end, &name, &length, &value))) {
+		struct property *last = prop;
+
+		prop = new_property(name, length, value, last);
+		if (!prop) {
+			rv = -ENOMEM;
+			prop = last;
+			goto out;
+		}
+	}
+	if (!buf) {
+		rv = -EINVAL;
+		goto out;
+	}
+
+	rv = pSeries_reconfig_add_node(path, prop);
+
+out:
+	if (rv)
+		release_prop_list(prop);
+	return rv;
+}
+
+static int do_remove_node(char *buf)
+{
+	struct device_node *node;
+	int rv = -ENODEV;
+
+	if ((node = of_find_node_by_path(buf)))
+		rv = pSeries_reconfig_remove_node(node);
+
+	of_node_put(node);
+	return rv;
+}
+
+static char *parse_node(char *buf, size_t bufsize, struct device_node **npp)
+{
+	char *handle_str;
+	phandle handle;
+	*npp = NULL;
+
+	handle_str = buf;
+
+	buf = strchr(buf, ' ');
+	if (!buf)
+		return NULL;
+	*buf = '\0';
+	buf++;
+
+	handle = simple_strtoul(handle_str, NULL, 0);
+
+	*npp = of_find_node_by_phandle(handle);
+	return buf;
+}
+
+static int do_add_property(char *buf, size_t bufsize)
+{
+	struct property *prop = NULL;
+	struct device_node *np;
+	unsigned char *value;
+	char *name, *end;
+	int length;
+	end = buf + bufsize;
+	buf = parse_node(buf, bufsize, &np);
+
+	if (!np)
+		return -ENODEV;
+
+	if (parse_next_property(buf, end, &name, &length, &value) == NULL)
+		return -EINVAL;
+
+	prop = new_property(name, length, value, NULL);
+	if (!prop)
+		return -ENOMEM;
+
+	of_add_property(np, prop);
+
+	return 0;
+}
+
+static int do_remove_property(char *buf, size_t bufsize)
+{
+	struct device_node *np;
+	char *tmp;
+	buf = parse_node(buf, bufsize, &np);
+
+	if (!np)
+		return -ENODEV;
+
+	tmp = strchr(buf,' ');
+	if (tmp)
+		*tmp = '\0';
+
+	if (strlen(buf) == 0)
+		return -EINVAL;
+
+	return of_remove_property(np, of_find_property(np, buf, NULL));
+}
+
+static int do_update_property(char *buf, size_t bufsize)
+{
+	struct device_node *np;
+	unsigned char *value;
+	char *name, *end, *next_prop;
+	int length;
+	struct property *newprop;
+	buf = parse_node(buf, bufsize, &np);
+	end = buf + bufsize;
+
+	if (!np)
+		return -ENODEV;
+
+	next_prop = parse_next_property(buf, end, &name, &length, &value);
+	if (!next_prop)
+		return -EINVAL;
+
+	if (!strlen(name))
+		return -ENODEV;
+
+	newprop = new_property(name, length, value, NULL);
+	if (!newprop)
+		return -ENOMEM;
+
+	if (!strcmp(name, "slb-size") || !strcmp(name, "ibm,slb-size"))
+		slb_set_size(*(int *)value);
+
+	return of_update_property(np, newprop);
+}
+
+/**
+ * ofdt_write - perform operations on the Open Firmware device tree
+ *
+ * @file: not used
+ * @buf: command and arguments
+ * @count: size of the command buffer
+ * @off: not used
+ *
+ * Operations supported at this time are addition and removal of
+ * whole nodes along with their properties.  Operations on individual
+ * properties are not implemented (yet).
+ */
+static ssize_t ofdt_write(struct file *file, const char __user *buf, size_t count,
+			  loff_t *off)
+{
+	int rv;
+	char *kbuf;
+	char *tmp;
+
+	rv = security_locked_down(LOCKDOWN_DEVICE_TREE);
+	if (rv)
+		return rv;
+
+	kbuf = memdup_user_nul(buf, count);
+	if (IS_ERR(kbuf))
+		return PTR_ERR(kbuf);
+
+	tmp = strchr(kbuf, ' ');
+	if (!tmp) {
+		rv = -EINVAL;
+		goto out;
+	}
+	*tmp = '\0';
+	tmp++;
+
+	if (!strcmp(kbuf, "add_node"))
+		rv = do_add_node(tmp, count - (tmp - kbuf));
+	else if (!strcmp(kbuf, "remove_node"))
+		rv = do_remove_node(tmp);
+	else if (!strcmp(kbuf, "add_property"))
+		rv = do_add_property(tmp, count - (tmp - kbuf));
+	else if (!strcmp(kbuf, "remove_property"))
+		rv = do_remove_property(tmp, count - (tmp - kbuf));
+	else if (!strcmp(kbuf, "update_property"))
+		rv = do_update_property(tmp, count - (tmp - kbuf));
+	else
+		rv = -EINVAL;
+out:
+	kfree(kbuf);
+	return rv ? rv : count;
+}
+
+static const struct proc_ops ofdt_proc_ops = {
+	.proc_write	= ofdt_write,
+	.proc_lseek	= noop_llseek,
+};
+
+/* create /proc/powerpc/ofdt write-only by root */
+static int proc_ppc64_create_ofdt(void)
+{
+	struct proc_dir_entry *ent;
+
+	ent = proc_create("powerpc/ofdt", 0200, NULL, &ofdt_proc_ops);
+	if (ent)
+		proc_set_size(ent, 0);
+
+	return 0;
+}
+machine_device_initcall(pseries, proc_ppc64_create_ofdt);