Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

12 files changed, 1500 insertions, 0 deletions

diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
new file mode 100644
index 000000000..45adc4926
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-sev-kit.dtb
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-tysom-m.dtb
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
new file mode 100644
index 000000000..1069134f2
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
+
+/ {
+	compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit",
+		     "microchip,mpfs";
+
+	core_pwm0: pwm@40000000 {
+		compatible = "microchip,corepwm-rtl-v4";
+		reg = <0x0 0x40000000 0x0 0xF0>;
+		microchip,sync-update-mask = /bits/ 32 <0>;
+		#pwm-cells = <3>;
+		clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@40000200 {
+		compatible = "microchip,corei2c-rtl-v7";
+		reg = <0x0 0x40000200 0x0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>;
+		interrupt-parent = <&plic>;
+		interrupts = <122>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	pcie: pcie@3000000000 {
+		compatible = "microchip,pcie-host-1.0";
+		#address-cells = <0x3>;
+		#interrupt-cells = <0x1>;
+		#size-cells = <0x2>;
+		device_type = "pci";
+		reg = <0x30 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
+		reg-names = "cfg", "apb";
+		bus-range = <0x0 0x7f>;
+		interrupt-parent = <&plic>;
+		interrupts = <119>;
+		interrupt-map = <0 0 0 1 &pcie_intc 0>,
+				<0 0 0 2 &pcie_intc 1>,
+				<0 0 0 3 &pcie_intc 2>,
+				<0 0 0 4 &pcie_intc 3>;
+		interrupt-map-mask = <0 0 0 7>;
+		clocks = <&ccc_nw CLK_CCC_PLL0_OUT1>, <&ccc_nw CLK_CCC_PLL0_OUT3>;
+		clock-names = "fic1", "fic3";
+		ranges = <0x3000000 0x0 0x8000000 0x30 0x8000000 0x0 0x80000000>;
+		dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x1 0x00000000>;
+		msi-parent = <&pcie>;
+		msi-controller;
+		status = "disabled";
+		pcie_intc: interrupt-controller {
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+	};
+
+	refclk_ccc: cccrefclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+};
+
+&ccc_nw {
+	clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+		 <&refclk_ccc>, <&refclk_ccc>;
+	clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+		      "dll0_ref", "dll1_ref";
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
new file mode 100644
index 000000000..90b261114
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-icicle-kit-fabric.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define RTCCLK_FREQ		1000000
+
+/ {
+	model = "Microchip PolarFire-SoC Icicle Kit";
+	compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit",
+		     "microchip,mpfs";
+
+	aliases {
+		ethernet0 = &mac1;
+		serial0 = &mmuart0;
+		serial1 = &mmuart1;
+		serial2 = &mmuart2;
+		serial3 = &mmuart3;
+		serial4 = &mmuart4;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <RTCCLK_FREQ>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			label = "led1";
+		};
+
+		led-2 {
+			gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			label = "led2";
+		};
+
+		led-3 {
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			label = "led3";
+		};
+
+		led-4 {
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			label = "led4";
+		};
+	};
+
+	ddrc_cache_lo: memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+		status = "okay";
+	};
+
+	ddrc_cache_hi: memory@1040000000 {
+		device_type = "memory";
+		reg = <0x10 0x40000000 0x0 0x40000000>;
+		status = "okay";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hss_payload: region@BFC00000 {
+			reg = <0x0 0xBFC00000 0x0 0x400000>;
+			no-map;
+		};
+	};
+};
+
+&core_pwm0 {
+	status = "okay";
+};
+
+&gpio2 {
+	interrupts = <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "sgmii";
+	phy-handle = <&phy0>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "sgmii";
+	phy-handle = <&phy1>;
+	status = "okay";
+
+	phy1: ethernet-phy@9 {
+		reg = <9>;
+	};
+
+	phy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&mbox {
+	status = "okay";
+};
+
+&mmc {
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&mmuart1 {
+	status = "okay";
+};
+
+&mmuart2 {
+	status = "okay";
+};
+
+&mmuart3 {
+	status = "okay";
+};
+
+&mmuart4 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <125000000>;
+};
+
+&refclk_ccc {
+	clock-frequency = <50000000>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&syscontroller {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi
new file mode 100644
index 000000000..8230f06dd
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2022 Microchip Technology Inc */
+
+/ {
+	fabric_clk3: fabric-clk3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <62500000>;
+	};
+
+	fabric_clk1: fabric-clk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	pcie: pcie@2000000000 {
+		compatible = "microchip,pcie-host-1.0";
+		#address-cells = <0x3>;
+		#interrupt-cells = <0x1>;
+		#size-cells = <0x2>;
+		device_type = "pci";
+		reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
+		reg-names = "cfg", "apb";
+		bus-range = <0x0 0x7f>;
+		interrupt-parent = <&plic>;
+		interrupts = <119>;
+		interrupt-map = <0 0 0 1 &pcie_intc 0>,
+				<0 0 0 2 &pcie_intc 1>,
+				<0 0 0 3 &pcie_intc 2>,
+				<0 0 0 4 &pcie_intc 3>;
+		interrupt-map-mask = <0 0 0 7>;
+		clocks = <&fabric_clk1>, <&fabric_clk3>;
+		clock-names = "fic0", "fic3";
+		ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
+		msi-parent = <&pcie>;
+		msi-controller;
+		status = "disabled";
+		pcie_intc: interrupt-controller {
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts
new file mode 100644
index 000000000..184cb36a1
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Original all-in-one devicetree:
+ * Copyright (C) 2021-2022 - Wolfgang Grandegger <wg@aries-embedded.de>
+ * Rewritten to use includes:
+ * Copyright (C) 2022 - Conor Dooley <conor.dooley@microchip.com>
+ */
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-m100pfs-fabric.dtsi"
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define MTIMER_FREQ	1000000
+
+/ {
+	model = "Aries Embedded M100PFEVPS";
+	compatible = "aries,m100pfsevp", "microchip,mpfs";
+
+	aliases {
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
+		serial0 = &mmuart0;
+		serial1 = &mmuart1;
+		serial2 = &mmuart2;
+		serial3 = &mmuart3;
+		serial4 = &mmuart4;
+		gpio0 = &gpio0;
+		gpio1 = &gpio2;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <MTIMER_FREQ>;
+	};
+
+	ddrc_cache_lo: memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+	};
+	ddrc_cache_hi: memory@1040000000 {
+		device_type = "memory";
+		reg = <0x10 0x40000000 0x0 0x40000000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&gpio0 {
+	interrupts = <13>, <14>, <15>, <16>,
+		     <17>, <18>, <19>, <20>,
+		     <21>, <22>, <23>, <24>,
+		     <25>, <26>;
+	ngpios = <14>;
+	status = "okay";
+
+	pmic-irq-hog {
+		gpio-hog;
+		gpios = <13 0>;
+		input;
+	};
+
+	/* Set to low for eMMC, high for SD-card */
+	mmc-sel-hog {
+		gpio-hog;
+		gpios = <12 0>;
+		output-high;
+	};
+};
+
+&gpio2 {
+	interrupts = <13>, <14>, <15>, <16>,
+		     <17>, <18>, <19>, <20>,
+		     <21>, <22>, <23>, <24>,
+		     <25>, <26>, <27>, <28>,
+		     <29>, <30>, <31>, <32>,
+		     <33>, <34>, <35>, <36>,
+		     <37>, <38>, <39>, <40>,
+		     <41>, <42>, <43>, <44>;
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	phy-mode = "gmii";
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mac1 {
+	status = "okay";
+	phy-mode = "gmii";
+	phy-handle = <&phy1>;
+	phy1: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mbox {
+	status = "okay";
+};
+
+&mmc {
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	no-1-8-v;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	disable-wp;
+	status = "okay";
+};
+
+&mmuart1 {
+	status = "okay";
+};
+
+&mmuart2 {
+	status = "okay";
+};
+
+&mmuart3 {
+	status = "okay";
+};
+
+&mmuart4 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <125000000>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&syscontroller {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
new file mode 100644
index 000000000..9a56de7b9
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2022 Microchip Technology Inc */
+
+/ {
+	fabric_clk3: fabric-clk3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <62500000>;
+	};
+
+	fabric_clk1: fabric-clk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	pcie: pcie@2000000000 {
+		compatible = "microchip,pcie-host-1.0";
+		#address-cells = <0x3>;
+		#interrupt-cells = <0x1>;
+		#size-cells = <0x2>;
+		device_type = "pci";
+		reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
+		reg-names = "cfg", "apb";
+		bus-range = <0x0 0x7f>;
+		interrupt-parent = <&plic>;
+		interrupts = <119>;
+		interrupt-map = <0 0 0 1 &pcie_intc 0>,
+				<0 0 0 2 &pcie_intc 1>,
+				<0 0 0 3 &pcie_intc 2>,
+				<0 0 0 4 &pcie_intc 3>;
+		interrupt-map-mask = <0 0 0 7>;
+		clocks = <&fabric_clk1>, <&fabric_clk3>;
+		clock-names = "fic0", "fic3";
+		ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
+		msi-parent = <&pcie>;
+		msi-controller;
+		status = "disabled";
+		pcie_intc: interrupt-controller {
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts b/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts
new file mode 100644
index 000000000..c87cc2d8f
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2022 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-polarberry-fabric.dtsi"
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define MTIMER_FREQ	1000000
+
+/ {
+	model = "Sundance PolarBerry";
+	compatible = "sundance,polarberry", "microchip,mpfs";
+
+	aliases {
+		ethernet0 = &mac1;
+		serial0 = &mmuart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <MTIMER_FREQ>;
+	};
+
+	ddrc_cache_lo: memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x2e000000>;
+	};
+
+	ddrc_cache_hi: memory@1000000000 {
+		device_type = "memory";
+		reg = <0x10 0x00000000 0x0 0xC0000000>;
+	};
+};
+
+/*
+ * phy0 is connected to mac0, but the port itself is on the (optional) carrier
+ * board.
+ */
+&mac0 {
+	phy-mode = "sgmii";
+	phy-handle = <&phy0>;
+	status = "disabled";
+};
+
+&mac1 {
+	phy-mode = "sgmii";
+	phy-handle = <&phy1>;
+	status = "okay";
+
+	phy1: ethernet-phy@5 {
+		reg = <5>;
+	};
+
+	phy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&mbox {
+	status = "okay";
+};
+
+&mmc {
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&mmuart0 {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <125000000>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&syscontroller {
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi
new file mode 100644
index 000000000..39a77df48
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2022 Microchip Technology Inc */
+
+/ {
+	fabric_clk3: fabric-clk3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	fabric_clk1: fabric-clk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts
new file mode 100644
index 000000000..013cb666c
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2022 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-sev-kit-fabric.dtsi"
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define MTIMER_FREQ		1000000
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Microchip PolarFire-SoC SEV Kit";
+	compatible = "microchip,mpfs-sev-kit", "microchip,mpfs";
+
+	aliases {
+		ethernet0 = &mac1;
+		serial0 = &mmuart0;
+		serial1 = &mmuart1;
+		serial2 = &mmuart2;
+		serial3 = &mmuart3;
+		serial4 = &mmuart4;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <MTIMER_FREQ>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		fabricbuf0ddrc: buffer@80000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x80000000 0x0 0x2000000>;
+		};
+
+		fabricbuf1ddrnc: buffer@c4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xc4000000 0x0 0x4000000>;
+		};
+
+		fabricbuf2ddrncwcb: buffer@d4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xd4000000 0x0 0x4000000>;
+		};
+	};
+
+	ddrc_cache: memory@1000000000 {
+		device_type = "memory";
+		reg = <0x10 0x0 0x0 0x76000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&gpio2 {
+	interrupts = <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>;
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&phy0>;
+	phy1: ethernet-phy@9 {
+		reg = <9>;
+	};
+	phy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&mac1 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&phy1>;
+};
+
+&mbox {
+	status = "okay";
+};
+
+&mmc {
+	status = "okay";
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+};
+
+&mmuart1 {
+	status = "okay";
+};
+
+&mmuart2 {
+	status = "okay";
+};
+
+&mmuart3 {
+	status = "okay";
+};
+
+&mmuart4 {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <125000000>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&syscontroller {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi
new file mode 100644
index 000000000..98f642e83
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2022 Microchip Technology Inc */
+
+// #include "dt-bindings/mailbox/miv-ihc.h"
+
+/ {
+	fabric_clk3: fabric-clk3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <62500000>;
+	};
+
+	fabric_clk1: fabric-clk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts b/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts
new file mode 100644
index 000000000..e0797c7e1
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Original all-in-one devicetree:
+ * Copyright (C) 2020-2022 - Aldec
+ * Rewritten to use includes:
+ * Copyright (C) 2022 - Conor Dooley <conor.dooley@microchip.com>
+ */
+
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-tysom-m-fabric.dtsi"
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define MTIMER_FREQ		1000000
+
+/ {
+	model = "Aldec TySOM-M-MPFS250T-REV2";
+	compatible = "aldec,tysom-m-mpfs250t-rev2", "microchip,mpfs";
+
+	aliases {
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
+		serial0 = &mmuart0;
+		serial1 = &mmuart1;
+		serial2 = &mmuart2;
+		serial3 = &mmuart3;
+		serial4 = &mmuart4;
+		gpio0 = &gpio0;
+		gpio1 = &gpio2;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <MTIMER_FREQ>;
+	};
+
+	ddrc_cache_lo: memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x30000000>;
+		status = "okay";
+	};
+
+	ddrc_cache_hi: memory@1000000000 {
+		device_type = "memory";
+		reg = <0x10 0x00000000 0x0 0x40000000>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led0 {
+			gpios = <&gpio1 23 1>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	hwmon: hwmon@45 {
+		status = "okay";
+		compatible = "ti,ina219";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+};
+
+&gpio1 {
+	interrupts = <27>, <28>, <29>, <30>,
+		     <31>, <32>, <33>, <47>,
+		     <35>, <36>, <37>, <38>,
+		     <39>, <40>, <41>, <42>,
+		     <43>, <44>, <45>, <46>,
+		     <47>, <48>, <49>, <50>;
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	phy-mode = "gmii";
+	phy-handle = <&phy0>;
+
+};
+
+&mac1 {
+	status = "okay";
+	phy-mode = "gmii";
+	phy-handle = <&phy1>;
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mbox {
+	status = "okay";
+};
+
+&mmc {
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	no-1-8-v;
+	disable-wp;
+	status = "okay";
+};
+
+&mmuart1 {
+	status = "okay";
+};
+
+&mmuart2 {
+	status = "okay";
+};
+
+&mmuart3 {
+	status = "okay";
+};
+
+&mmuart4 {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <125000000>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&syscontroller {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
new file mode 100644
index 000000000..0a9bb84af
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -0,0 +1,508 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
+
+/dts-v1/;
+#include "dt-bindings/clock/microchip,mpfs-clock.h"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Microchip PolarFire SoC";
+	compatible = "microchip,mpfs";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "sifive,e51", "sifive,rocket0", "riscv";
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <16384>;
+			reg = <0>;
+			riscv,isa = "rv64imac";
+			clocks = <&clkcfg CLK_CPU>;
+			status = "disabled";
+
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu1: cpu@1 {
+			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <1>;
+			riscv,isa = "rv64imafdc";
+			clocks = <&clkcfg CLK_CPU>;
+			tlb-split;
+			next-level-cache = <&cctrllr>;
+			status = "okay";
+
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu2: cpu@2 {
+			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <2>;
+			riscv,isa = "rv64imafdc";
+			clocks = <&clkcfg CLK_CPU>;
+			tlb-split;
+			next-level-cache = <&cctrllr>;
+			status = "okay";
+
+			cpu2_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu3: cpu@3 {
+			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <3>;
+			riscv,isa = "rv64imafdc";
+			clocks = <&clkcfg CLK_CPU>;
+			tlb-split;
+			next-level-cache = <&cctrllr>;
+			status = "okay";
+
+			cpu3_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu4: cpu@4 {
+			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <4>;
+			riscv,isa = "rv64imafdc";
+			clocks = <&clkcfg CLK_CPU>;
+			tlb-split;
+			next-level-cache = <&cctrllr>;
+			status = "okay";
+			cpu4_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+			};
+		};
+	};
+
+	refclk: mssrefclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	syscontroller: syscontroller {
+		compatible = "microchip,mpfs-sys-controller";
+		mboxes = <&mbox 0>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		cctrllr: cache-controller@2010000 {
+			compatible = "microchip,mpfs-ccache", "sifive,fu540-c000-ccache", "cache";
+			reg = <0x0 0x2010000 0x0 0x1000>;
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <1024>;
+			cache-size = <2097152>;
+			cache-unified;
+			interrupt-parent = <&plic>;
+			interrupts = <1>, <3>, <4>, <2>;
+		};
+
+		clint: clint@2000000 {
+			compatible = "sifive,fu540-c000-clint", "sifive,clint0";
+			reg = <0x0 0x2000000 0x0 0xC000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>,
+					      <&cpu2_intc 3>, <&cpu2_intc 7>,
+					      <&cpu3_intc 3>, <&cpu3_intc 7>,
+					      <&cpu4_intc 3>, <&cpu4_intc 7>;
+		};
+
+		plic: interrupt-controller@c000000 {
+			compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupts-extended = <&cpu0_intc 11>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>,
+					      <&cpu2_intc 11>, <&cpu2_intc 9>,
+					      <&cpu3_intc 11>, <&cpu3_intc 9>,
+					      <&cpu4_intc 11>, <&cpu4_intc 9>;
+			riscv,ndev = <186>;
+		};
+
+		pdma: dma-controller@3000000 {
+			compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
+			reg = <0x0 0x3000000 0x0 0x8000>;
+			interrupt-parent = <&plic>;
+			interrupts = <5 6>, <7 8>, <9 10>, <11 12>;
+			dma-channels = <4>;
+			#dma-cells = <1>;
+		};
+
+		clkcfg: clkcfg@20002000 {
+			compatible = "microchip,mpfs-clkcfg";
+			reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
+			clocks = <&refclk>;
+			#clock-cells = <1>;
+		};
+
+		ccc_se: clock-controller@38010000 {
+			compatible = "microchip,mpfs-ccc";
+			reg = <0x0 0x38010000 0x0 0x1000>, <0x0 0x38020000 0x0 0x1000>,
+			      <0x0 0x39010000 0x0 0x1000>, <0x0 0x39020000 0x0 0x1000>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		ccc_ne: clock-controller@38040000 {
+			compatible = "microchip,mpfs-ccc";
+			reg = <0x0 0x38040000 0x0 0x1000>, <0x0 0x38080000 0x0 0x1000>,
+			      <0x0 0x39040000 0x0 0x1000>, <0x0 0x39080000 0x0 0x1000>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		ccc_nw: clock-controller@38100000 {
+			compatible = "microchip,mpfs-ccc";
+			reg = <0x0 0x38100000 0x0 0x1000>, <0x0 0x38200000 0x0 0x1000>,
+			      <0x0 0x39100000 0x0 0x1000>, <0x0 0x39200000 0x0 0x1000>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		ccc_sw: clock-controller@38400000 {
+			compatible = "microchip,mpfs-ccc";
+			reg = <0x0 0x38400000 0x0 0x1000>, <0x0 0x38800000 0x0 0x1000>,
+			      <0x0 0x39400000 0x0 0x1000>, <0x0 0x39800000 0x0 0x1000>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		mmuart0: serial@20000000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20000000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <90>;
+			current-speed = <115200>;
+			clocks = <&clkcfg CLK_MMUART0>;
+			status = "disabled"; /* Reserved for the HSS */
+		};
+
+		mmuart1: serial@20100000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20100000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <91>;
+			current-speed = <115200>;
+			clocks = <&clkcfg CLK_MMUART1>;
+			status = "disabled";
+		};
+
+		mmuart2: serial@20102000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20102000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <92>;
+			current-speed = <115200>;
+			clocks = <&clkcfg CLK_MMUART2>;
+			status = "disabled";
+		};
+
+		mmuart3: serial@20104000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20104000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <93>;
+			current-speed = <115200>;
+			clocks = <&clkcfg CLK_MMUART3>;
+			status = "disabled";
+		};
+
+		mmuart4: serial@20106000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20106000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <94>;
+			clocks = <&clkcfg CLK_MMUART4>;
+			current-speed = <115200>;
+			status = "disabled";
+		};
+
+		/* Common node entry for emmc/sd */
+		mmc: mmc@20008000 {
+			compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc";
+			reg = <0x0 0x20008000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupts = <88>;
+			clocks = <&clkcfg CLK_MMC>;
+			max-frequency = <200000000>;
+			status = "disabled";
+		};
+
+		spi0: spi@20108000 {
+			compatible = "microchip,mpfs-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20108000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupts = <54>;
+			clocks = <&clkcfg CLK_SPI0>;
+			status = "disabled";
+		};
+
+		spi1: spi@20109000 {
+			compatible = "microchip,mpfs-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20109000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupts = <55>;
+			clocks = <&clkcfg CLK_SPI1>;
+			status = "disabled";
+		};
+
+		qspi: spi@21000000 {
+			compatible = "microchip,mpfs-qspi", "microchip,coreqspi-rtl-v2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21000000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupts = <85>;
+			clocks = <&clkcfg CLK_QSPI>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2010a000 {
+			compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7";
+			reg = <0x0 0x2010a000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&plic>;
+			interrupts = <58>;
+			clocks = <&clkcfg CLK_I2C0>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2010b000 {
+			compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7";
+			reg = <0x0 0x2010b000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&plic>;
+			interrupts = <61>;
+			clocks = <&clkcfg CLK_I2C1>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		can0: can@2010c000 {
+			compatible = "microchip,mpfs-can";
+			reg = <0x0 0x2010c000 0x0 0x1000>;
+			clocks = <&clkcfg CLK_CAN0>;
+			interrupt-parent = <&plic>;
+			interrupts = <56>;
+			status = "disabled";
+		};
+
+		can1: can@2010d000 {
+			compatible = "microchip,mpfs-can";
+			reg = <0x0 0x2010d000 0x0 0x1000>;
+			clocks = <&clkcfg CLK_CAN1>;
+			interrupt-parent = <&plic>;
+			interrupts = <57>;
+			status = "disabled";
+		};
+
+		mac0: ethernet@20110000 {
+			compatible = "cdns,macb";
+			reg = <0x0 0x20110000 0x0 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&plic>;
+			interrupts = <64>, <65>, <66>, <67>, <68>, <69>;
+			local-mac-address = [00 00 00 00 00 00];
+			clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		mac1: ethernet@20112000 {
+			compatible = "cdns,macb";
+			reg = <0x0 0x20112000 0x0 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&plic>;
+			interrupts = <70>, <71>, <72>, <73>, <74>, <75>;
+			local-mac-address = [00 00 00 00 00 00];
+			clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		gpio0: gpio@20120000 {
+			compatible = "microchip,mpfs-gpio";
+			reg = <0x0 0x20120000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			clocks = <&clkcfg CLK_GPIO0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio1: gpio@20121000 {
+			compatible = "microchip,mpfs-gpio";
+			reg = <0x0 0x20121000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			clocks = <&clkcfg CLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio2: gpio@20122000 {
+			compatible = "microchip,mpfs-gpio";
+			reg = <0x0 0x20122000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			clocks = <&clkcfg CLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rtc: rtc@20124000 {
+			compatible = "microchip,mpfs-rtc";
+			reg = <0x0 0x20124000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupts = <80>, <81>;
+			clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>;
+			clock-names = "rtc", "rtcref";
+			status = "disabled";
+		};
+
+		usb: usb@20201000 {
+			compatible = "microchip,mpfs-musb";
+			reg = <0x0 0x20201000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupts = <86>, <87>;
+			clocks = <&clkcfg CLK_USB>;
+			interrupt-names = "dma","mc";
+			status = "disabled";
+		};
+
+		mbox: mailbox@37020000 {
+			compatible = "microchip,mpfs-mailbox";
+			reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>;
+			interrupt-parent = <&plic>;
+			interrupts = <96>;
+			#mbox-cells = <1>;
+			status = "disabled";
+		};
+	};
+};