Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 495 insertions, 0 deletions

diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
new file mode 100644
index 000000000..cb747bf6c
--- /dev/null
+++ b/arch/s390/kvm/sigp.c
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * handling interprocessor communication
+ *
+ * Copyright IBM Corp. 2008, 2013
+ *
+ *    Author(s): Carsten Otte <cotte@de.ibm.com>
+ *               Christian Borntraeger <borntraeger@de.ibm.com>
+ *               Christian Ehrhardt <ehrhardt@de.ibm.com>
+ */
+
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <linux/slab.h>
+#include <asm/sigp.h>
+#include "gaccess.h"
+#include "kvm-s390.h"
+#include "trace.h"
+
+static int __sigp_sense(struct kvm_vcpu *vcpu, struct kvm_vcpu *dst_vcpu,
+			u64 *reg)
+{
+	const bool stopped = kvm_s390_test_cpuflags(dst_vcpu, CPUSTAT_STOPPED);
+	int rc;
+	int ext_call_pending;
+
+	ext_call_pending = kvm_s390_ext_call_pending(dst_vcpu);
+	if (!stopped && !ext_call_pending)
+		rc = SIGP_CC_ORDER_CODE_ACCEPTED;
+	else {
+		*reg &= 0xffffffff00000000UL;
+		if (ext_call_pending)
+			*reg |= SIGP_STATUS_EXT_CALL_PENDING;
+		if (stopped)
+			*reg |= SIGP_STATUS_STOPPED;
+		rc = SIGP_CC_STATUS_STORED;
+	}
+
+	VCPU_EVENT(vcpu, 4, "sensed status of cpu %x rc %x", dst_vcpu->vcpu_id,
+		   rc);
+	return rc;
+}
+
+static int __inject_sigp_emergency(struct kvm_vcpu *vcpu,
+				    struct kvm_vcpu *dst_vcpu)
+{
+	struct kvm_s390_irq irq = {
+		.type = KVM_S390_INT_EMERGENCY,
+		.u.emerg.code = vcpu->vcpu_id,
+	};
+	int rc = 0;
+
+	rc = kvm_s390_inject_vcpu(dst_vcpu, &irq);
+	if (!rc)
+		VCPU_EVENT(vcpu, 4, "sent sigp emerg to cpu %x",
+			   dst_vcpu->vcpu_id);
+
+	return rc ? rc : SIGP_CC_ORDER_CODE_ACCEPTED;
+}
+
+static int __sigp_emergency(struct kvm_vcpu *vcpu, struct kvm_vcpu *dst_vcpu)
+{
+	return __inject_sigp_emergency(vcpu, dst_vcpu);
+}
+
+static int __sigp_conditional_emergency(struct kvm_vcpu *vcpu,
+					struct kvm_vcpu *dst_vcpu,
+					u16 asn, u64 *reg)
+{
+	const u64 psw_int_mask = PSW_MASK_IO | PSW_MASK_EXT;
+	u16 p_asn, s_asn;
+	psw_t *psw;
+	bool idle;
+
+	idle = is_vcpu_idle(vcpu);
+	psw = &dst_vcpu->arch.sie_block->gpsw;
+	p_asn = dst_vcpu->arch.sie_block->gcr[4] & 0xffff;  /* Primary ASN */
+	s_asn = dst_vcpu->arch.sie_block->gcr[3] & 0xffff;  /* Secondary ASN */
+
+	/* Inject the emergency signal? */
+	if (!is_vcpu_stopped(vcpu)
+	    || (psw->mask & psw_int_mask) != psw_int_mask
+	    || (idle && psw->addr != 0)
+	    || (!idle && (asn == p_asn || asn == s_asn))) {
+		return __inject_sigp_emergency(vcpu, dst_vcpu);
+	} else {
+		*reg &= 0xffffffff00000000UL;
+		*reg |= SIGP_STATUS_INCORRECT_STATE;
+		return SIGP_CC_STATUS_STORED;
+	}
+}
+
+static int __sigp_external_call(struct kvm_vcpu *vcpu,
+				struct kvm_vcpu *dst_vcpu, u64 *reg)
+{
+	struct kvm_s390_irq irq = {
+		.type = KVM_S390_INT_EXTERNAL_CALL,
+		.u.extcall.code = vcpu->vcpu_id,
+	};
+	int rc;
+
+	rc = kvm_s390_inject_vcpu(dst_vcpu, &irq);
+	if (rc == -EBUSY) {
+		*reg &= 0xffffffff00000000UL;
+		*reg |= SIGP_STATUS_EXT_CALL_PENDING;
+		return SIGP_CC_STATUS_STORED;
+	} else if (rc == 0) {
+		VCPU_EVENT(vcpu, 4, "sent sigp ext call to cpu %x",
+			   dst_vcpu->vcpu_id);
+	}
+
+	return rc ? rc : SIGP_CC_ORDER_CODE_ACCEPTED;
+}
+
+static int __sigp_stop(struct kvm_vcpu *vcpu, struct kvm_vcpu *dst_vcpu)
+{
+	struct kvm_s390_irq irq = {
+		.type = KVM_S390_SIGP_STOP,
+	};
+	int rc;
+
+	rc = kvm_s390_inject_vcpu(dst_vcpu, &irq);
+	if (rc == -EBUSY)
+		rc = SIGP_CC_BUSY;
+	else if (rc == 0)
+		VCPU_EVENT(vcpu, 4, "sent sigp stop to cpu %x",
+			   dst_vcpu->vcpu_id);
+
+	return rc;
+}
+
+static int __sigp_stop_and_store_status(struct kvm_vcpu *vcpu,
+					struct kvm_vcpu *dst_vcpu, u64 *reg)
+{
+	struct kvm_s390_irq irq = {
+		.type = KVM_S390_SIGP_STOP,
+		.u.stop.flags = KVM_S390_STOP_FLAG_STORE_STATUS,
+	};
+	int rc;
+
+	rc = kvm_s390_inject_vcpu(dst_vcpu, &irq);
+	if (rc == -EBUSY)
+		rc = SIGP_CC_BUSY;
+	else if (rc == 0)
+		VCPU_EVENT(vcpu, 4, "sent sigp stop and store status to cpu %x",
+			   dst_vcpu->vcpu_id);
+
+	return rc;
+}
+
+static int __sigp_set_arch(struct kvm_vcpu *vcpu, u32 parameter,
+			   u64 *status_reg)
+{
+	*status_reg &= 0xffffffff00000000UL;
+
+	/* Reject set arch order, with czam we're always in z/Arch mode. */
+	*status_reg |= SIGP_STATUS_INVALID_PARAMETER;
+	return SIGP_CC_STATUS_STORED;
+}
+
+static int __sigp_set_prefix(struct kvm_vcpu *vcpu, struct kvm_vcpu *dst_vcpu,
+			     u32 address, u64 *reg)
+{
+	struct kvm_s390_irq irq = {
+		.type = KVM_S390_SIGP_SET_PREFIX,
+		.u.prefix.address = address & 0x7fffe000u,
+	};
+	int rc;
+
+	/*
+	 * Make sure the new value is valid memory. We only need to check the
+	 * first page, since address is 8k aligned and memory pieces are always
+	 * at least 1MB aligned and have at least a size of 1MB.
+	 */
+	if (kvm_is_error_gpa(vcpu->kvm, irq.u.prefix.address)) {
+		*reg &= 0xffffffff00000000UL;
+		*reg |= SIGP_STATUS_INVALID_PARAMETER;
+		return SIGP_CC_STATUS_STORED;
+	}
+
+	rc = kvm_s390_inject_vcpu(dst_vcpu, &irq);
+	if (rc == -EBUSY) {
+		*reg &= 0xffffffff00000000UL;
+		*reg |= SIGP_STATUS_INCORRECT_STATE;
+		return SIGP_CC_STATUS_STORED;
+	}
+
+	return rc;
+}
+
+static int __sigp_store_status_at_addr(struct kvm_vcpu *vcpu,
+				       struct kvm_vcpu *dst_vcpu,
+				       u32 addr, u64 *reg)
+{
+	int rc;
+
+	if (!kvm_s390_test_cpuflags(dst_vcpu, CPUSTAT_STOPPED)) {
+		*reg &= 0xffffffff00000000UL;
+		*reg |= SIGP_STATUS_INCORRECT_STATE;
+		return SIGP_CC_STATUS_STORED;
+	}
+
+	addr &= 0x7ffffe00;
+	rc = kvm_s390_store_status_unloaded(dst_vcpu, addr);
+	if (rc == -EFAULT) {
+		*reg &= 0xffffffff00000000UL;
+		*reg |= SIGP_STATUS_INVALID_PARAMETER;
+		rc = SIGP_CC_STATUS_STORED;
+	}
+	return rc;
+}
+
+static int __sigp_sense_running(struct kvm_vcpu *vcpu,
+				struct kvm_vcpu *dst_vcpu, u64 *reg)
+{
+	int rc;
+
+	if (!test_kvm_facility(vcpu->kvm, 9)) {
+		*reg &= 0xffffffff00000000UL;
+		*reg |= SIGP_STATUS_INVALID_ORDER;
+		return SIGP_CC_STATUS_STORED;
+	}
+
+	if (kvm_s390_test_cpuflags(dst_vcpu, CPUSTAT_RUNNING)) {
+		/* running */
+		rc = SIGP_CC_ORDER_CODE_ACCEPTED;
+	} else {
+		/* not running */
+		*reg &= 0xffffffff00000000UL;
+		*reg |= SIGP_STATUS_NOT_RUNNING;
+		rc = SIGP_CC_STATUS_STORED;
+	}
+
+	VCPU_EVENT(vcpu, 4, "sensed running status of cpu %x rc %x",
+		   dst_vcpu->vcpu_id, rc);
+
+	return rc;
+}
+
+static int __prepare_sigp_re_start(struct kvm_vcpu *vcpu,
+				   struct kvm_vcpu *dst_vcpu, u8 order_code)
+{
+	struct kvm_s390_local_interrupt *li = &dst_vcpu->arch.local_int;
+	/* handle (RE)START in user space */
+	int rc = -EOPNOTSUPP;
+
+	/* make sure we don't race with STOP irq injection */
+	spin_lock(&li->lock);
+	if (kvm_s390_is_stop_irq_pending(dst_vcpu))
+		rc = SIGP_CC_BUSY;
+	spin_unlock(&li->lock);
+
+	return rc;
+}
+
+static int __prepare_sigp_cpu_reset(struct kvm_vcpu *vcpu,
+				    struct kvm_vcpu *dst_vcpu, u8 order_code)
+{
+	/* handle (INITIAL) CPU RESET in user space */
+	return -EOPNOTSUPP;
+}
+
+static int __prepare_sigp_unknown(struct kvm_vcpu *vcpu,
+				  struct kvm_vcpu *dst_vcpu)
+{
+	/* handle unknown orders in user space */
+	return -EOPNOTSUPP;
+}
+
+static int handle_sigp_dst(struct kvm_vcpu *vcpu, u8 order_code,
+			   u16 cpu_addr, u32 parameter, u64 *status_reg)
+{
+	int rc;
+	struct kvm_vcpu *dst_vcpu = kvm_get_vcpu_by_id(vcpu->kvm, cpu_addr);
+
+	if (!dst_vcpu)
+		return SIGP_CC_NOT_OPERATIONAL;
+
+	/*
+	 * SIGP RESTART, SIGP STOP, and SIGP STOP AND STORE STATUS orders
+	 * are processed asynchronously. Until the affected VCPU finishes
+	 * its work and calls back into KVM to clear the (RESTART or STOP)
+	 * interrupt, we need to return any new non-reset orders "busy".
+	 *
+	 * This is important because a single VCPU could issue:
+	 *  1) SIGP STOP $DESTINATION
+	 *  2) SIGP SENSE $DESTINATION
+	 *
+	 * If the SIGP SENSE would not be rejected as "busy", it could
+	 * return an incorrect answer as to whether the VCPU is STOPPED
+	 * or OPERATING.
+	 */
+	if (order_code != SIGP_INITIAL_CPU_RESET &&
+	    order_code != SIGP_CPU_RESET) {
+		/*
+		 * Lockless check. Both SIGP STOP and SIGP (RE)START
+		 * properly synchronize everything while processing
+		 * their orders, while the guest cannot observe a
+		 * difference when issuing other orders from two
+		 * different VCPUs.
+		 */
+		if (kvm_s390_is_stop_irq_pending(dst_vcpu) ||
+		    kvm_s390_is_restart_irq_pending(dst_vcpu))
+			return SIGP_CC_BUSY;
+	}
+
+	switch (order_code) {
+	case SIGP_SENSE:
+		vcpu->stat.instruction_sigp_sense++;
+		rc = __sigp_sense(vcpu, dst_vcpu, status_reg);
+		break;
+	case SIGP_EXTERNAL_CALL:
+		vcpu->stat.instruction_sigp_external_call++;
+		rc = __sigp_external_call(vcpu, dst_vcpu, status_reg);
+		break;
+	case SIGP_EMERGENCY_SIGNAL:
+		vcpu->stat.instruction_sigp_emergency++;
+		rc = __sigp_emergency(vcpu, dst_vcpu);
+		break;
+	case SIGP_STOP:
+		vcpu->stat.instruction_sigp_stop++;
+		rc = __sigp_stop(vcpu, dst_vcpu);
+		break;
+	case SIGP_STOP_AND_STORE_STATUS:
+		vcpu->stat.instruction_sigp_stop_store_status++;
+		rc = __sigp_stop_and_store_status(vcpu, dst_vcpu, status_reg);
+		break;
+	case SIGP_STORE_STATUS_AT_ADDRESS:
+		vcpu->stat.instruction_sigp_store_status++;
+		rc = __sigp_store_status_at_addr(vcpu, dst_vcpu, parameter,
+						 status_reg);
+		break;
+	case SIGP_SET_PREFIX:
+		vcpu->stat.instruction_sigp_prefix++;
+		rc = __sigp_set_prefix(vcpu, dst_vcpu, parameter, status_reg);
+		break;
+	case SIGP_COND_EMERGENCY_SIGNAL:
+		vcpu->stat.instruction_sigp_cond_emergency++;
+		rc = __sigp_conditional_emergency(vcpu, dst_vcpu, parameter,
+						  status_reg);
+		break;
+	case SIGP_SENSE_RUNNING:
+		vcpu->stat.instruction_sigp_sense_running++;
+		rc = __sigp_sense_running(vcpu, dst_vcpu, status_reg);
+		break;
+	case SIGP_START:
+		vcpu->stat.instruction_sigp_start++;
+		rc = __prepare_sigp_re_start(vcpu, dst_vcpu, order_code);
+		break;
+	case SIGP_RESTART:
+		vcpu->stat.instruction_sigp_restart++;
+		rc = __prepare_sigp_re_start(vcpu, dst_vcpu, order_code);
+		break;
+	case SIGP_INITIAL_CPU_RESET:
+		vcpu->stat.instruction_sigp_init_cpu_reset++;
+		rc = __prepare_sigp_cpu_reset(vcpu, dst_vcpu, order_code);
+		break;
+	case SIGP_CPU_RESET:
+		vcpu->stat.instruction_sigp_cpu_reset++;
+		rc = __prepare_sigp_cpu_reset(vcpu, dst_vcpu, order_code);
+		break;
+	default:
+		vcpu->stat.instruction_sigp_unknown++;
+		rc = __prepare_sigp_unknown(vcpu, dst_vcpu);
+	}
+
+	if (rc == -EOPNOTSUPP)
+		VCPU_EVENT(vcpu, 4,
+			   "sigp order %u -> cpu %x: handled in user space",
+			   order_code, dst_vcpu->vcpu_id);
+
+	return rc;
+}
+
+static int handle_sigp_order_in_user_space(struct kvm_vcpu *vcpu, u8 order_code,
+					   u16 cpu_addr)
+{
+	if (!vcpu->kvm->arch.user_sigp)
+		return 0;
+
+	switch (order_code) {
+	case SIGP_SENSE:
+	case SIGP_EXTERNAL_CALL:
+	case SIGP_EMERGENCY_SIGNAL:
+	case SIGP_COND_EMERGENCY_SIGNAL:
+	case SIGP_SENSE_RUNNING:
+		return 0;
+	/* update counters as we're directly dropping to user space */
+	case SIGP_STOP:
+		vcpu->stat.instruction_sigp_stop++;
+		break;
+	case SIGP_STOP_AND_STORE_STATUS:
+		vcpu->stat.instruction_sigp_stop_store_status++;
+		break;
+	case SIGP_STORE_STATUS_AT_ADDRESS:
+		vcpu->stat.instruction_sigp_store_status++;
+		break;
+	case SIGP_STORE_ADDITIONAL_STATUS:
+		vcpu->stat.instruction_sigp_store_adtl_status++;
+		break;
+	case SIGP_SET_PREFIX:
+		vcpu->stat.instruction_sigp_prefix++;
+		break;
+	case SIGP_START:
+		vcpu->stat.instruction_sigp_start++;
+		break;
+	case SIGP_RESTART:
+		vcpu->stat.instruction_sigp_restart++;
+		break;
+	case SIGP_INITIAL_CPU_RESET:
+		vcpu->stat.instruction_sigp_init_cpu_reset++;
+		break;
+	case SIGP_CPU_RESET:
+		vcpu->stat.instruction_sigp_cpu_reset++;
+		break;
+	default:
+		vcpu->stat.instruction_sigp_unknown++;
+	}
+	VCPU_EVENT(vcpu, 3, "SIGP: order %u for CPU %d handled in userspace",
+		   order_code, cpu_addr);
+
+	return 1;
+}
+
+int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu)
+{
+	int r1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4;
+	int r3 = vcpu->arch.sie_block->ipa & 0x000f;
+	u32 parameter;
+	u16 cpu_addr = vcpu->run->s.regs.gprs[r3];
+	u8 order_code;
+	int rc;
+
+	/* sigp in userspace can exit */
+	if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)
+		return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP);
+
+	order_code = kvm_s390_get_base_disp_rs(vcpu, NULL);
+	if (handle_sigp_order_in_user_space(vcpu, order_code, cpu_addr))
+		return -EOPNOTSUPP;
+
+	if (r1 % 2)
+		parameter = vcpu->run->s.regs.gprs[r1];
+	else
+		parameter = vcpu->run->s.regs.gprs[r1 + 1];
+
+	trace_kvm_s390_handle_sigp(vcpu, order_code, cpu_addr, parameter);
+	switch (order_code) {
+	case SIGP_SET_ARCHITECTURE:
+		vcpu->stat.instruction_sigp_arch++;
+		rc = __sigp_set_arch(vcpu, parameter,
+				     &vcpu->run->s.regs.gprs[r1]);
+		break;
+	default:
+		rc = handle_sigp_dst(vcpu, order_code, cpu_addr,
+				     parameter,
+				     &vcpu->run->s.regs.gprs[r1]);
+	}
+
+	if (rc < 0)
+		return rc;
+
+	kvm_s390_set_psw_cc(vcpu, rc);
+	return 0;
+}
+
+/*
+ * Handle SIGP partial execution interception.
+ *
+ * This interception will occur at the source cpu when a source cpu sends an
+ * external call to a target cpu and the target cpu has the WAIT bit set in
+ * its cpuflags. Interception will occurr after the interrupt indicator bits at
+ * the target cpu have been set. All error cases will lead to instruction
+ * interception, therefore nothing is to be checked or prepared.
+ */
+int kvm_s390_handle_sigp_pei(struct kvm_vcpu *vcpu)
+{
+	int r3 = vcpu->arch.sie_block->ipa & 0x000f;
+	u16 cpu_addr = vcpu->run->s.regs.gprs[r3];
+	struct kvm_vcpu *dest_vcpu;
+	u8 order_code = kvm_s390_get_base_disp_rs(vcpu, NULL);
+
+	if (order_code == SIGP_EXTERNAL_CALL) {
+		trace_kvm_s390_handle_sigp_pei(vcpu, order_code, cpu_addr);
+
+		dest_vcpu = kvm_get_vcpu_by_id(vcpu->kvm, cpu_addr);
+		BUG_ON(dest_vcpu == NULL);
+
+		kvm_s390_vcpu_wakeup(dest_vcpu);
+		kvm_s390_set_psw_cc(vcpu, SIGP_CC_ORDER_CODE_ACCEPTED);
+		return 0;
+	}
+
+	return -EOPNOTSUPP;
+}