Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 289 insertions, 0 deletions

diff --git a/arch/s390/purgatory/head.S b/arch/s390/purgatory/head.S
new file mode 100644
index 000000000..6f835124e
--- /dev/null
+++ b/arch/s390/purgatory/head.S
@@ -0,0 +1,289 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Purgatory setup code
+ *
+ * Copyright IBM Corp. 2018
+ *
+ * Author(s): Philipp Rudo <prudo@linux.vnet.ibm.com>
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/page.h>
+#include <asm/sigp.h>
+#include <asm/ptrace.h>
+
+/* The purgatory is the code running between two kernels. It's main purpose
+ * is to verify that the next kernel was not corrupted after load and to
+ * start it.
+ *
+ * If the next kernel is a crash kernel there are some peculiarities to
+ * consider:
+ *
+ * First the purgatory is called twice. Once only to verify the
+ * sha digest. So if the crash kernel got corrupted the old kernel can try
+ * to trigger a stand-alone dumper. And once to actually load the crash kernel.
+ *
+ * Second the purgatory also has to swap the crash memory region with its
+ * destination at address 0. As the purgatory is part of crash memory this
+ * requires some finesse. The tactic here is that the purgatory first copies
+ * itself to the end of the destination and then swaps the rest of the
+ * memory running from there.
+ */
+
+#define bufsz purgatory_end-stack
+
+.macro MEMCPY dst,src,len
+	lgr	%r0,\dst
+	lgr	%r1,\len
+	lgr	%r2,\src
+	lgr	%r3,\len
+
+20:	mvcle	%r0,%r2,0
+	jo	20b
+.endm
+
+.macro MEMSWAP dst,src,buf,len
+10:	larl	%r0,purgatory_end
+	larl	%r1,stack
+	slgr	%r0,%r1
+	cgr	\len,%r0
+	jh	11f
+	lgr	%r4,\len
+	j	12f
+11:	lgr	%r4,%r0
+
+12:	MEMCPY	\buf,\dst,%r4
+	MEMCPY	\dst,\src,%r4
+	MEMCPY	\src,\buf,%r4
+
+	agr	\dst,%r4
+	agr	\src,%r4
+	sgr	\len,%r4
+
+	cghi	\len,0
+	jh	10b
+.endm
+
+.macro START_NEXT_KERNEL base subcode
+	lg	%r4,kernel_entry-\base(%r13)
+	lg	%r5,load_psw_mask-\base(%r13)
+	ogr	%r4,%r5
+	stg	%r4,0(%r0)
+
+	xgr	%r0,%r0
+	lghi	%r1,\subcode
+	diag	%r0,%r1,0x308
+.endm
+
+.text
+.align PAGE_SIZE
+ENTRY(purgatory_start)
+	/* The purgatory might be called after a diag308 so better set
+	 * architecture and addressing mode.
+	 */
+	lhi	%r1,1
+	sigp	%r1,%r0,SIGP_SET_ARCHITECTURE
+	sam64
+
+	larl	%r5,gprregs
+	stmg	%r6,%r15,0(%r5)
+
+	basr	%r13,0
+.base_crash:
+
+	/* Setup stack */
+	larl	%r15,purgatory_end-STACK_FRAME_OVERHEAD
+
+	/* If the next kernel is KEXEC_TYPE_CRASH the purgatory is called
+	 * directly with a flag passed in %r2 whether the purgatory shall do
+	 * checksum verification only (%r2 = 0 -> verification only).
+	 *
+	 * Check now and preserve over C function call by storing in
+	 * %r10 whith
+	 *	1 -> checksum verification only
+	 *	0 -> load new kernel
+	 */
+	lghi	%r10,0
+	lg	%r11,kernel_type-.base_crash(%r13)
+	cghi	%r11,1		/* KEXEC_TYPE_CRASH */
+	jne	.do_checksum_verification
+	cghi	%r2,0		/* checksum verification only */
+	jne	.do_checksum_verification
+	lghi	%r10,1
+
+.do_checksum_verification:
+	brasl	%r14,verify_sha256_digest
+
+	cghi	%r10,1		/* checksum verification only */
+	je	.return_old_kernel
+	cghi	%r2,0		/* checksum match */
+	jne	.disabled_wait
+
+	/* If the next kernel is a crash kernel the purgatory has to swap
+	 * the mem regions first.
+	 */
+	cghi	%r11,1 /* KEXEC_TYPE_CRASH */
+	je	.start_crash_kernel
+
+	/* start normal kernel */
+	START_NEXT_KERNEL .base_crash 0
+
+.return_old_kernel:
+	lmg	%r6,%r15,gprregs-.base_crash(%r13)
+	br	%r14
+
+.disabled_wait:
+	lpswe	disabled_wait_psw-.base_crash(%r13)
+
+.start_crash_kernel:
+	/* Location of purgatory_start in crash memory */
+	larl	%r0,.base_crash
+	larl	%r1,purgatory_start
+	slgr	%r0,%r1
+	lgr	%r8,%r13
+	sgr	%r8,%r0
+
+	/* Destination for this code i.e. end of memory to be swapped. */
+	larl	%r0,purgatory_end
+	larl	%r1,purgatory_start
+	slgr	%r0,%r1
+	lg	%r9,crash_size-.base_crash(%r13)
+	sgr	%r9,%r0
+
+	/* Destination in crash memory, i.e. same as r9 but in crash memory. */
+	lg	%r10,crash_start-.base_crash(%r13)
+	agr	%r10,%r9
+
+	/* Buffer location (in crash memory) and size. As the purgatory is
+	 * behind the point of no return it can re-use the stack as buffer.
+	 */
+	larl	%r11,purgatory_end
+	larl	%r12,stack
+	slgr	%r11,%r12
+
+	MEMCPY	%r12,%r9,%r11	/* dst	-> (crash) buf */
+	MEMCPY	%r9,%r8,%r11	/* self -> dst */
+
+	/* Jump to new location. */
+	lgr	%r7,%r9
+	larl	%r0,.jump_to_dst
+	larl	%r1,purgatory_start
+	slgr	%r0,%r1
+	agr	%r7,%r0
+	br	%r7
+
+.jump_to_dst:
+	basr	%r13,0
+.base_dst:
+
+	/* clear buffer */
+	MEMCPY	%r12,%r10,%r11	/* (crash) buf -> (crash) dst */
+
+	/* Load new buffer location after jump */
+	larl	%r7,stack
+	lgr	%r0,%r7
+	larl	%r1,purgatory_start
+	slgr	%r0,%r1
+	agr	%r10,%r0
+	MEMCPY	%r10,%r7,%r11	/* (new) buf -> (crash) buf */
+
+	/* Now the code is set up to run from its designated location. Start
+	 * swapping the rest of crash memory now.
+	 *
+	 * The registers will be used as follow:
+	 *
+	 *	%r0-%r4	reserved for macros defined above
+	 *	%r5-%r6 tmp registers
+	 *	%r7	pointer to current struct sha region
+	 *	%r8	index to iterate over all sha regions
+	 *	%r9	pointer in crash memory
+	 *	%r10	pointer in old kernel
+	 *	%r11	total size (still) to be moved
+	 *	%r12	pointer to buffer
+	 */
+	lgr	%r12,%r7
+	lgr	%r11,%r9
+	lghi	%r10,0
+	lg	%r9,crash_start-.base_dst(%r13)
+	lghi	%r8,16	/* KEXEC_SEGMENTS_MAX */
+	larl	%r7,purgatory_sha_regions
+
+	j .loop_first
+
+	/* Loop over all purgatory_sha_regions. */
+.loop_next:
+	aghi	%r8,-1
+	cghi	%r8,0
+	je	.loop_out
+
+	aghi	%r7,__KEXEC_SHA_REGION_SIZE
+
+.loop_first:
+	lg	%r5,__KEXEC_SHA_REGION_START(%r7)
+	cghi	%r5,0
+	je	.loop_next
+
+	/* Copy [end last sha region, start current sha region) */
+	/* Note: kexec_sha_region->start points in crash memory */
+	sgr	%r5,%r9
+	MEMCPY	%r9,%r10,%r5
+
+	agr	%r9,%r5
+	agr	%r10,%r5
+	sgr	%r11,%r5
+
+	/* Swap sha region */
+	lg	%r6,__KEXEC_SHA_REGION_LEN(%r7)
+	MEMSWAP	%r9,%r10,%r12,%r6
+	sg	%r11,__KEXEC_SHA_REGION_LEN(%r7)
+	j	.loop_next
+
+.loop_out:
+	/* Copy rest of crash memory */
+	MEMCPY	%r9,%r10,%r11
+
+	/* start crash kernel */
+	START_NEXT_KERNEL .base_dst 1
+
+
+load_psw_mask:
+	.long	0x00080000,0x80000000
+
+	.align	8
+disabled_wait_psw:
+	.quad	0x0002000180000000
+	.quad	0x0000000000000000 + .do_checksum_verification
+
+gprregs:
+	.rept	10
+	.quad	0
+	.endr
+
+/* Macro to define a global variable with name and size (in bytes) to be
+ * shared with C code.
+ *
+ * Add the .size and .type attribute to satisfy checks on the Elf_Sym during
+ * purgatory load.
+ */
+.macro GLOBAL_VARIABLE name,size
+\name:
+	.global \name
+	.size	\name,\size
+	.type	\name,object
+	.skip	\size,0
+.endm
+
+GLOBAL_VARIABLE purgatory_sha256_digest,32
+GLOBAL_VARIABLE purgatory_sha_regions,16*__KEXEC_SHA_REGION_SIZE
+GLOBAL_VARIABLE kernel_entry,8
+GLOBAL_VARIABLE kernel_type,8
+GLOBAL_VARIABLE crash_start,8
+GLOBAL_VARIABLE crash_size,8
+
+	.align	PAGE_SIZE
+stack:
+	/* The buffer to move this code must be as big as the code. */
+	.skip	stack-purgatory_start
+	.align	PAGE_SIZE
+purgatory_end: