Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 604 insertions, 0 deletions

diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
new file mode 100644
index 000000000..f39c8196e
--- /dev/null
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -0,0 +1,604 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R0P7757LC0012RL Support.
+ *
+ * Copyright (C) 2009 - 2010  Renesas Solutions Corp.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/io.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_data/sh_mmcif.h>
+#include <linux/sh_eth.h>
+#include <linux/sh_intc.h>
+#include <linux/usb/renesas_usbhs.h>
+#include <cpu/sh7757.h>
+#include <asm/heartbeat.h>
+
+static struct resource heartbeat_resource = {
+	.start	= 0xffec005c,	/* PUDR */
+	.end	= 0xffec005c,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.flags		= HEARTBEAT_INVERTED,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+/* Fast Ethernet */
+#define GBECONT		0xffc10100
+#define GBECONT_RMII1	BIT(17)
+#define GBECONT_RMII0	BIT(16)
+static void sh7757_eth_set_mdio_gate(void *addr)
+{
+	if (((unsigned long)addr & 0x00000fff) < 0x0800)
+		writel(readl(GBECONT) | GBECONT_RMII0, GBECONT);
+	else
+		writel(readl(GBECONT) | GBECONT_RMII1, GBECONT);
+}
+
+static struct resource sh_eth0_resources[] = {
+	{
+		.start  = 0xfef00000,
+		.end    = 0xfef001ff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = evt2irq(0xc80),
+		.end    = evt2irq(0xc80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7757_eth0_pdata = {
+	.phy = 1,
+	.set_mdio_gate = sh7757_eth_set_mdio_gate,
+};
+
+static struct platform_device sh7757_eth0_device = {
+	.name		= "sh7757-ether",
+	.resource	= sh_eth0_resources,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(sh_eth0_resources),
+	.dev		= {
+		.platform_data = &sh7757_eth0_pdata,
+	},
+};
+
+static struct resource sh_eth1_resources[] = {
+	{
+		.start  = 0xfef00800,
+		.end    = 0xfef009ff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = evt2irq(0xc80),
+		.end    = evt2irq(0xc80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7757_eth1_pdata = {
+	.phy = 1,
+	.set_mdio_gate = sh7757_eth_set_mdio_gate,
+};
+
+static struct platform_device sh7757_eth1_device = {
+	.name		= "sh7757-ether",
+	.resource	= sh_eth1_resources,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(sh_eth1_resources),
+	.dev		= {
+		.platform_data = &sh7757_eth1_pdata,
+	},
+};
+
+static void sh7757_eth_giga_set_mdio_gate(void *addr)
+{
+	if (((unsigned long)addr & 0x00000fff) < 0x0800) {
+		gpio_set_value(GPIO_PTT4, 1);
+		writel(readl(GBECONT) & ~GBECONT_RMII0, GBECONT);
+	} else {
+		gpio_set_value(GPIO_PTT4, 0);
+		writel(readl(GBECONT) & ~GBECONT_RMII1, GBECONT);
+	}
+}
+
+static struct resource sh_eth_giga0_resources[] = {
+	{
+		.start  = 0xfee00000,
+		.end    = 0xfee007ff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		/* TSU */
+		.start  = 0xfee01800,
+		.end    = 0xfee01fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = evt2irq(0x2960),
+		.end    = evt2irq(0x2960),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7757_eth_giga0_pdata = {
+	.phy = 18,
+	.set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
+	.phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
+};
+
+static struct platform_device sh7757_eth_giga0_device = {
+	.name		= "sh7757-gether",
+	.resource	= sh_eth_giga0_resources,
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(sh_eth_giga0_resources),
+	.dev		= {
+		.platform_data = &sh7757_eth_giga0_pdata,
+	},
+};
+
+static struct resource sh_eth_giga1_resources[] = {
+	{
+		.start  = 0xfee00800,
+		.end    = 0xfee00fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		/* TSU */
+		.start  = 0xfee01800,
+		.end    = 0xfee01fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = evt2irq(0x2980),
+		.end    = evt2irq(0x2980),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7757_eth_giga1_pdata = {
+	.phy = 19,
+	.set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
+	.phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
+};
+
+static struct platform_device sh7757_eth_giga1_device = {
+	.name		= "sh7757-gether",
+	.resource	= sh_eth_giga1_resources,
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(sh_eth_giga1_resources),
+	.dev		= {
+		.platform_data = &sh7757_eth_giga1_pdata,
+	},
+};
+
+/* Fixed 3.3V regulator to be used by SDHI0, MMCIF */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
+
+/* SH_MMCIF */
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.start	= 0xffcb0000,
+		.end	= 0xffcb00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x1c60),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= evt2irq(0x1c80),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.sup_pclk	= 0x0f,
+	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NONREMOVABLE,
+	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.platform_data		= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
+/* SDHI0 */
+static struct tmio_mmc_data sdhi_info = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI_RX,
+	.capabilities	= MMC_CAP_SD_HIGHSPEED,
+};
+
+static struct resource sdhi_resources[] = {
+	[0] = {
+		.start  = 0xffe50000,
+		.end    = 0xffe500ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x480),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi_resources),
+	.resource       = sdhi_resources,
+	.id             = 0,
+	.dev	= {
+		.platform_data	= &sdhi_info,
+	},
+};
+
+static int usbhs0_get_id(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+static struct renesas_usbhs_platform_info usb0_data = {
+	.platform_callback = {
+		.get_id = usbhs0_get_id,
+	},
+	.driver_param = {
+		.buswait_bwait = 5,
+	}
+};
+
+static struct resource usb0_resources[] = {
+	[0] = {
+		.start	= 0xfe450000,
+		.end	= 0xfe4501ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x840),
+		.end	= evt2irq(0x840),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb0_device = {
+	.name		= "renesas_usbhs",
+	.id		= 0,
+	.dev = {
+		.platform_data		= &usb0_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb0_resources),
+	.resource	= usb0_resources,
+};
+
+static struct platform_device *sh7757lcr_devices[] __initdata = {
+	&heartbeat_device,
+	&sh7757_eth0_device,
+	&sh7757_eth1_device,
+	&sh7757_eth_giga0_device,
+	&sh7757_eth_giga1_device,
+	&sh_mmcif_device,
+	&sdhi_device,
+	&usb0_device,
+};
+
+static struct flash_platform_data spi_flash_data = {
+	.name = "m25p80",
+	.type = "m25px64",
+};
+
+static struct spi_board_info spi_board_info[] = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 25000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &spi_flash_data,
+	},
+};
+
+static int __init sh7757lcr_devices_setup(void)
+{
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
+	/* RGMII (PTA) */
+	gpio_request(GPIO_FN_ET0_MDC, NULL);
+	gpio_request(GPIO_FN_ET0_MDIO, NULL);
+	gpio_request(GPIO_FN_ET1_MDC, NULL);
+	gpio_request(GPIO_FN_ET1_MDIO, NULL);
+
+	/* ONFI (PTB, PTZ) */
+	gpio_request(GPIO_FN_ON_NRE, NULL);
+	gpio_request(GPIO_FN_ON_NWE, NULL);
+	gpio_request(GPIO_FN_ON_NWP, NULL);
+	gpio_request(GPIO_FN_ON_NCE0, NULL);
+	gpio_request(GPIO_FN_ON_R_B0, NULL);
+	gpio_request(GPIO_FN_ON_ALE, NULL);
+	gpio_request(GPIO_FN_ON_CLE, NULL);
+
+	gpio_request(GPIO_FN_ON_DQ7, NULL);
+	gpio_request(GPIO_FN_ON_DQ6, NULL);
+	gpio_request(GPIO_FN_ON_DQ5, NULL);
+	gpio_request(GPIO_FN_ON_DQ4, NULL);
+	gpio_request(GPIO_FN_ON_DQ3, NULL);
+	gpio_request(GPIO_FN_ON_DQ2, NULL);
+	gpio_request(GPIO_FN_ON_DQ1, NULL);
+	gpio_request(GPIO_FN_ON_DQ0, NULL);
+
+	/* IRQ8 to 0 (PTB, PTC) */
+	gpio_request(GPIO_FN_IRQ8, NULL);
+	gpio_request(GPIO_FN_IRQ7, NULL);
+	gpio_request(GPIO_FN_IRQ6, NULL);
+	gpio_request(GPIO_FN_IRQ5, NULL);
+	gpio_request(GPIO_FN_IRQ4, NULL);
+	gpio_request(GPIO_FN_IRQ3, NULL);
+	gpio_request(GPIO_FN_IRQ2, NULL);
+	gpio_request(GPIO_FN_IRQ1, NULL);
+	gpio_request(GPIO_FN_IRQ0, NULL);
+
+	/* SPI0 (PTD) */
+	gpio_request(GPIO_FN_SP0_MOSI, NULL);
+	gpio_request(GPIO_FN_SP0_MISO, NULL);
+	gpio_request(GPIO_FN_SP0_SCK, NULL);
+	gpio_request(GPIO_FN_SP0_SCK_FB, NULL);
+	gpio_request(GPIO_FN_SP0_SS0, NULL);
+	gpio_request(GPIO_FN_SP0_SS1, NULL);
+	gpio_request(GPIO_FN_SP0_SS2, NULL);
+	gpio_request(GPIO_FN_SP0_SS3, NULL);
+
+	/* RMII 0/1 (PTE, PTF) */
+	gpio_request(GPIO_FN_RMII0_CRS_DV, NULL);
+	gpio_request(GPIO_FN_RMII0_TXD1, NULL);
+	gpio_request(GPIO_FN_RMII0_TXD0, NULL);
+	gpio_request(GPIO_FN_RMII0_TXEN, NULL);
+	gpio_request(GPIO_FN_RMII0_REFCLK, NULL);
+	gpio_request(GPIO_FN_RMII0_RXD1, NULL);
+	gpio_request(GPIO_FN_RMII0_RXD0, NULL);
+	gpio_request(GPIO_FN_RMII0_RX_ER, NULL);
+	gpio_request(GPIO_FN_RMII1_CRS_DV, NULL);
+	gpio_request(GPIO_FN_RMII1_TXD1, NULL);
+	gpio_request(GPIO_FN_RMII1_TXD0, NULL);
+	gpio_request(GPIO_FN_RMII1_TXEN, NULL);
+	gpio_request(GPIO_FN_RMII1_REFCLK, NULL);
+	gpio_request(GPIO_FN_RMII1_RXD1, NULL);
+	gpio_request(GPIO_FN_RMII1_RXD0, NULL);
+	gpio_request(GPIO_FN_RMII1_RX_ER, NULL);
+
+	/* eMMC (PTG) */
+	gpio_request(GPIO_FN_MMCCLK, NULL);
+	gpio_request(GPIO_FN_MMCCMD, NULL);
+	gpio_request(GPIO_FN_MMCDAT7, NULL);
+	gpio_request(GPIO_FN_MMCDAT6, NULL);
+	gpio_request(GPIO_FN_MMCDAT5, NULL);
+	gpio_request(GPIO_FN_MMCDAT4, NULL);
+	gpio_request(GPIO_FN_MMCDAT3, NULL);
+	gpio_request(GPIO_FN_MMCDAT2, NULL);
+	gpio_request(GPIO_FN_MMCDAT1, NULL);
+	gpio_request(GPIO_FN_MMCDAT0, NULL);
+
+	/* LPC (PTG, PTH, PTQ, PTU) */
+	gpio_request(GPIO_FN_SERIRQ, NULL);
+	gpio_request(GPIO_FN_LPCPD, NULL);
+	gpio_request(GPIO_FN_LDRQ, NULL);
+	gpio_request(GPIO_FN_WP, NULL);
+	gpio_request(GPIO_FN_FMS0, NULL);
+	gpio_request(GPIO_FN_LAD3, NULL);
+	gpio_request(GPIO_FN_LAD2, NULL);
+	gpio_request(GPIO_FN_LAD1, NULL);
+	gpio_request(GPIO_FN_LAD0, NULL);
+	gpio_request(GPIO_FN_LFRAME, NULL);
+	gpio_request(GPIO_FN_LRESET, NULL);
+	gpio_request(GPIO_FN_LCLK, NULL);
+	gpio_request(GPIO_FN_LGPIO7, NULL);
+	gpio_request(GPIO_FN_LGPIO6, NULL);
+	gpio_request(GPIO_FN_LGPIO5, NULL);
+	gpio_request(GPIO_FN_LGPIO4, NULL);
+
+	/* SPI1 (PTH) */
+	gpio_request(GPIO_FN_SP1_MOSI, NULL);
+	gpio_request(GPIO_FN_SP1_MISO, NULL);
+	gpio_request(GPIO_FN_SP1_SCK, NULL);
+	gpio_request(GPIO_FN_SP1_SCK_FB, NULL);
+	gpio_request(GPIO_FN_SP1_SS0, NULL);
+	gpio_request(GPIO_FN_SP1_SS1, NULL);
+
+	/* SDHI (PTI) */
+	gpio_request(GPIO_FN_SD_WP, NULL);
+	gpio_request(GPIO_FN_SD_CD, NULL);
+	gpio_request(GPIO_FN_SD_CLK, NULL);
+	gpio_request(GPIO_FN_SD_CMD, NULL);
+	gpio_request(GPIO_FN_SD_D3, NULL);
+	gpio_request(GPIO_FN_SD_D2, NULL);
+	gpio_request(GPIO_FN_SD_D1, NULL);
+	gpio_request(GPIO_FN_SD_D0, NULL);
+
+	/* SCIF3/4 (PTJ, PTW) */
+	gpio_request(GPIO_FN_RTS3, NULL);
+	gpio_request(GPIO_FN_CTS3, NULL);
+	gpio_request(GPIO_FN_TXD3, NULL);
+	gpio_request(GPIO_FN_RXD3, NULL);
+	gpio_request(GPIO_FN_RTS4, NULL);
+	gpio_request(GPIO_FN_RXD4, NULL);
+	gpio_request(GPIO_FN_TXD4, NULL);
+	gpio_request(GPIO_FN_CTS4, NULL);
+
+	/* SERMUX (PTK, PTL, PTO, PTV) */
+	gpio_request(GPIO_FN_COM2_TXD, NULL);
+	gpio_request(GPIO_FN_COM2_RXD, NULL);
+	gpio_request(GPIO_FN_COM2_RTS, NULL);
+	gpio_request(GPIO_FN_COM2_CTS, NULL);
+	gpio_request(GPIO_FN_COM2_DTR, NULL);
+	gpio_request(GPIO_FN_COM2_DSR, NULL);
+	gpio_request(GPIO_FN_COM2_DCD, NULL);
+	gpio_request(GPIO_FN_COM2_RI, NULL);
+	gpio_request(GPIO_FN_RAC_RXD, NULL);
+	gpio_request(GPIO_FN_RAC_RTS, NULL);
+	gpio_request(GPIO_FN_RAC_CTS, NULL);
+	gpio_request(GPIO_FN_RAC_DTR, NULL);
+	gpio_request(GPIO_FN_RAC_DSR, NULL);
+	gpio_request(GPIO_FN_RAC_DCD, NULL);
+	gpio_request(GPIO_FN_RAC_TXD, NULL);
+	gpio_request(GPIO_FN_COM1_TXD, NULL);
+	gpio_request(GPIO_FN_COM1_RXD, NULL);
+	gpio_request(GPIO_FN_COM1_RTS, NULL);
+	gpio_request(GPIO_FN_COM1_CTS, NULL);
+
+	writeb(0x10, 0xfe470000);	/* SMR0: SerMux mode 0 */
+
+	/* IIC (PTM, PTR, PTS) */
+	gpio_request(GPIO_FN_SDA7, NULL);
+	gpio_request(GPIO_FN_SCL7, NULL);
+	gpio_request(GPIO_FN_SDA6, NULL);
+	gpio_request(GPIO_FN_SCL6, NULL);
+	gpio_request(GPIO_FN_SDA5, NULL);
+	gpio_request(GPIO_FN_SCL5, NULL);
+	gpio_request(GPIO_FN_SDA4, NULL);
+	gpio_request(GPIO_FN_SCL4, NULL);
+	gpio_request(GPIO_FN_SDA3, NULL);
+	gpio_request(GPIO_FN_SCL3, NULL);
+	gpio_request(GPIO_FN_SDA2, NULL);
+	gpio_request(GPIO_FN_SCL2, NULL);
+	gpio_request(GPIO_FN_SDA1, NULL);
+	gpio_request(GPIO_FN_SCL1, NULL);
+	gpio_request(GPIO_FN_SDA0, NULL);
+	gpio_request(GPIO_FN_SCL0, NULL);
+
+	/* USB (PTN) */
+	gpio_request(GPIO_FN_VBUS_EN, NULL);
+	gpio_request(GPIO_FN_VBUS_OC, NULL);
+
+	/* SGPIO1/0 (PTN, PTO) */
+	gpio_request(GPIO_FN_SGPIO1_CLK, NULL);
+	gpio_request(GPIO_FN_SGPIO1_LOAD, NULL);
+	gpio_request(GPIO_FN_SGPIO1_DI, NULL);
+	gpio_request(GPIO_FN_SGPIO1_DO, NULL);
+	gpio_request(GPIO_FN_SGPIO0_CLK, NULL);
+	gpio_request(GPIO_FN_SGPIO0_LOAD, NULL);
+	gpio_request(GPIO_FN_SGPIO0_DI, NULL);
+	gpio_request(GPIO_FN_SGPIO0_DO, NULL);
+
+	/* WDT (PTN) */
+	gpio_request(GPIO_FN_SUB_CLKIN, NULL);
+
+	/* System (PTT) */
+	gpio_request(GPIO_FN_STATUS1, NULL);
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* PWMX (PTT) */
+	gpio_request(GPIO_FN_PWMX1, NULL);
+	gpio_request(GPIO_FN_PWMX0, NULL);
+
+	/* R-SPI (PTV) */
+	gpio_request(GPIO_FN_R_SPI_MOSI, NULL);
+	gpio_request(GPIO_FN_R_SPI_MISO, NULL);
+	gpio_request(GPIO_FN_R_SPI_RSPCK, NULL);
+	gpio_request(GPIO_FN_R_SPI_SSL0, NULL);
+	gpio_request(GPIO_FN_R_SPI_SSL1, NULL);
+
+	/* EVC (PTV, PTW) */
+	gpio_request(GPIO_FN_EVENT7, NULL);
+	gpio_request(GPIO_FN_EVENT6, NULL);
+	gpio_request(GPIO_FN_EVENT5, NULL);
+	gpio_request(GPIO_FN_EVENT4, NULL);
+	gpio_request(GPIO_FN_EVENT3, NULL);
+	gpio_request(GPIO_FN_EVENT2, NULL);
+	gpio_request(GPIO_FN_EVENT1, NULL);
+	gpio_request(GPIO_FN_EVENT0, NULL);
+
+	/* LED for heartbeat */
+	gpio_request(GPIO_PTU3, NULL);
+	gpio_direction_output(GPIO_PTU3, 1);
+	gpio_request(GPIO_PTU2, NULL);
+	gpio_direction_output(GPIO_PTU2, 1);
+	gpio_request(GPIO_PTU1, NULL);
+	gpio_direction_output(GPIO_PTU1, 1);
+	gpio_request(GPIO_PTU0, NULL);
+	gpio_direction_output(GPIO_PTU0, 1);
+
+	/* control for MDIO of Gigabit Ethernet */
+	gpio_request(GPIO_PTT4, NULL);
+	gpio_direction_output(GPIO_PTT4, 1);
+
+	/* control for eMMC */
+	gpio_request(GPIO_PTT7, NULL);		/* eMMC_RST# */
+	gpio_direction_output(GPIO_PTT7, 0);
+	gpio_request(GPIO_PTT6, NULL);		/* eMMC_INDEX# */
+	gpio_direction_output(GPIO_PTT6, 0);
+	gpio_request(GPIO_PTT5, NULL);		/* eMMC_PRST# */
+	gpio_direction_output(GPIO_PTT5, 1);
+
+	/* register SPI device information */
+	spi_register_board_info(spi_board_info,
+				ARRAY_SIZE(spi_board_info));
+
+	/* General platform */
+	return platform_add_devices(sh7757lcr_devices,
+				    ARRAY_SIZE(sh7757lcr_devices));
+}
+arch_initcall(sh7757lcr_devices_setup);
+
+/* Initialize IRQ setting */
+void __init init_sh7757lcr_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+/* Initialize the board */
+static void __init sh7757lcr_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "Renesas R0P7757LC0012RL support.\n");
+}
+
+static int sh7757lcr_mode_pins(void)
+{
+	int value = 0;
+
+	/* These are the factory default settings of S3 (Low active).
+	 * If you change these dip switches then you will need to
+	 * adjust the values below as well.
+	 */
+	value |= MODE_PIN0;	/* Clock Mode: 1 */
+
+	return value;
+}
+
+/* The Machine Vector */
+static struct sh_machine_vector mv_sh7757lcr __initmv = {
+	.mv_name		= "SH7757LCR",
+	.mv_setup		= sh7757lcr_setup,
+	.mv_init_irq		= init_sh7757lcr_IRQ,
+	.mv_mode_pins		= sh7757lcr_mode_pins,
+};
+