Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 196 insertions, 0 deletions

diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c
new file mode 100644
index 000000000..5b2c1fd25
--- /dev/null
+++ b/arch/sh/drivers/dma/dmabrg.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SH7760 DMABRG IRQ handling
+ *
+ * (c) 2007 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <asm/dma.h>
+#include <asm/dmabrg.h>
+#include <asm/io.h>
+
+/*
+ * The DMABRG is a special DMA unit within the SH7760. It does transfers
+ * from USB-SRAM/Audio units to main memory (and also the LCDC; but that
+ * part is sensibly placed  in the LCDC  registers and requires no irqs)
+ * It has 3 IRQ lines which trigger 10 events, and works independently
+ * from the traditional SH DMAC (although it blocks usage of DMAC 0)
+ *
+ * BRGIRQID   | component | dir | meaning      | source
+ * -----------------------------------------------------
+ *     0      | USB-DMA   | ... | xfer done    | DMABRGI1
+ *     1      | USB-UAE   | ... | USB addr err.| DMABRGI0
+ *     2      | HAC0/SSI0 | play| all done     | DMABRGI1
+ *     3      | HAC0/SSI0 | play| half done    | DMABRGI2
+ *     4      | HAC0/SSI0 | rec | all done     | DMABRGI1
+ *     5      | HAC0/SSI0 | rec | half done    | DMABRGI2
+ *     6      | HAC1/SSI1 | play| all done     | DMABRGI1
+ *     7      | HAC1/SSI1 | play| half done    | DMABRGI2
+ *     8      | HAC1/SSI1 | rec | all done     | DMABRGI1
+ *     9      | HAC1/SSI1 | rec | half done    | DMABRGI2
+ *
+ * all can be enabled/disabled in the DMABRGCR register,
+ * as well as checked if they occurred.
+ *
+ * DMABRGI0 services  USB  DMA  Address  errors,  but it still must be
+ * enabled/acked in the DMABRGCR register.  USB-DMA complete indicator
+ * is grouped together with the audio buffer end indicators, too bad...
+ *
+ * DMABRGCR:	Bits 31-24: audio-dma ENABLE flags,
+ *		Bits 23-16: audio-dma STATUS flags,
+ *		Bits  9-8:  USB error/xfer ENABLE,
+ *		Bits  1-0:  USB error/xfer STATUS.
+ *	Ack an IRQ by writing 0 to the STATUS flag.
+ *	Mask IRQ by writing 0 to ENABLE flag.
+ *
+ * Usage is almost like with any other IRQ:
+ *  dmabrg_request_irq(BRGIRQID, handler, data)
+ *  dmabrg_free_irq(BRGIRQID)
+ *
+ * handler prototype:  void brgirqhandler(void *data)
+ */
+
+#define DMARSRA		0xfe090000
+#define DMAOR		0xffa00040
+#define DMACHCR0	0xffa0000c
+#define DMABRGCR	0xfe3c0000
+
+#define DMAOR_BRG	0x0000c000
+#define DMAOR_DMEN	0x00000001
+
+#define DMABRGI0	68
+#define DMABRGI1	69
+#define DMABRGI2	70
+
+struct dmabrg_handler {
+	void (*handler)(void *);
+	void *data;
+} *dmabrg_handlers;
+
+static inline void dmabrg_call_handler(int i)
+{
+	dmabrg_handlers[i].handler(dmabrg_handlers[i].data);
+}
+
+/*
+ * main DMABRG irq handler. It acks irqs and then
+ * handles every set and unmasked bit sequentially.
+ * No locking and no validity checks; it should be
+ * as fast as possible (audio!)
+ */
+static irqreturn_t dmabrg_irq(int irq, void *data)
+{
+	unsigned long dcr;
+	unsigned int i;
+
+	dcr = __raw_readl(DMABRGCR);
+	__raw_writel(dcr & ~0x00ff0003, DMABRGCR);	/* ack all */
+	dcr &= dcr >> 8;	/* ignore masked */
+
+	/* USB stuff, get it out of the way first */
+	if (dcr & 1)
+		dmabrg_call_handler(DMABRGIRQ_USBDMA);
+	if (dcr & 2)
+		dmabrg_call_handler(DMABRGIRQ_USBDMAERR);
+
+	/* Audio */
+	dcr >>= 16;
+	while (dcr) {
+		i = __ffs(dcr);
+		dcr &= dcr - 1;
+		dmabrg_call_handler(i + DMABRGIRQ_A0TXF);
+	}
+	return IRQ_HANDLED;
+}
+
+static void dmabrg_disable_irq(unsigned int dmairq)
+{
+	unsigned long dcr;
+	dcr = __raw_readl(DMABRGCR);
+	dcr &= ~(1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
+	__raw_writel(dcr, DMABRGCR);
+}
+
+static void dmabrg_enable_irq(unsigned int dmairq)
+{
+	unsigned long dcr;
+	dcr = __raw_readl(DMABRGCR);
+	dcr |= (1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
+	__raw_writel(dcr, DMABRGCR);
+}
+
+int dmabrg_request_irq(unsigned int dmairq, void(*handler)(void*),
+		       void *data)
+{
+	if ((dmairq > 9) || !handler)
+		return -ENOENT;
+	if (dmabrg_handlers[dmairq].handler)
+		return -EBUSY;
+
+	dmabrg_handlers[dmairq].handler = handler;
+	dmabrg_handlers[dmairq].data = data;
+	
+	dmabrg_enable_irq(dmairq);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dmabrg_request_irq);
+
+void dmabrg_free_irq(unsigned int dmairq)
+{
+	if (likely(dmairq < 10)) {
+		dmabrg_disable_irq(dmairq);
+		dmabrg_handlers[dmairq].handler = NULL;
+		dmabrg_handlers[dmairq].data = NULL;
+	}
+}
+EXPORT_SYMBOL_GPL(dmabrg_free_irq);
+
+static int __init dmabrg_init(void)
+{
+	unsigned long or;
+	int ret;
+
+	dmabrg_handlers = kcalloc(10, sizeof(struct dmabrg_handler),
+				  GFP_KERNEL);
+	if (!dmabrg_handlers)
+		return -ENOMEM;
+
+#ifdef CONFIG_SH_DMA
+	/* request DMAC channel 0 before anyone else can get it */
+	ret = request_dma(0, "DMAC 0 (DMABRG)");
+	if (ret < 0)
+		printk(KERN_INFO "DMABRG: DMAC ch0 not reserved!\n");
+#endif
+
+	__raw_writel(0, DMABRGCR);
+	__raw_writel(0, DMACHCR0);
+	__raw_writel(0x94000000, DMARSRA);	/* enable DMABRG in DMAC 0 */
+
+	/* enable DMABRG mode, enable the DMAC */
+	or = __raw_readl(DMAOR);
+	__raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
+
+	ret = request_irq(DMABRGI0, dmabrg_irq, 0,
+			"DMABRG USB address error", NULL);
+	if (ret)
+		goto out0;
+
+	ret = request_irq(DMABRGI1, dmabrg_irq, 0,
+			"DMABRG Transfer End", NULL);
+	if (ret)
+		goto out1;
+
+	ret = request_irq(DMABRGI2, dmabrg_irq, 0,
+			"DMABRG Transfer Half", NULL);
+	if (ret == 0)
+		return ret;
+
+	free_irq(DMABRGI1, NULL);
+out1:	free_irq(DMABRGI0, NULL);
+out0:	kfree(dmabrg_handlers);
+	return ret;
+}
+subsys_initcall(dmabrg_init);