Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 402 insertions, 0 deletions

diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S
new file mode 100644
index 000000000..f928c0315
--- /dev/null
+++ b/arch/sh/kernel/cpu/shmobile/sleep.S
@@ -0,0 +1,402 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S
+ *
+ * Sleep mode and Standby modes support for SuperH Mobile
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+
+/*
+ * Kernel mode register usage, see entry.S:
+ *	k0	scratch
+ *	k1	scratch
+ */
+#define k0	r0
+#define k1	r1
+
+/* manage self-refresh and enter standby mode. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(sh_mobile_sleep_enter_start)
+
+	/* save mode flags */
+	mov.l	r4, @(SH_SLEEP_MODE, r5)
+
+	/* save original vbr */
+	stc	vbr, r0
+	mov.l	r0, @(SH_SLEEP_VBR, r5)
+
+	/* point vbr to our on-chip memory page */
+	ldc	r5, vbr
+
+	/* save return address */
+	sts	pr, r0
+	mov.l	r0, @(SH_SLEEP_SPC, r5)
+
+	/* save sr */
+	stc	sr, r0
+	mov.l	r0, @(SH_SLEEP_SR, r5)
+
+	/* save general purpose registers to stack if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_REGS, r0
+	bt	skip_regs_save
+
+	sts.l	pr, @-r15
+	mov.l	r14, @-r15
+	mov.l	r13, @-r15
+	mov.l	r12, @-r15
+	mov.l	r11, @-r15
+	mov.l	r10, @-r15
+	mov.l	r9, @-r15
+	mov.l	r8, @-r15
+
+	/* make sure bank0 is selected, save low registers */
+	mov.l	rb_bit, r9
+	not	r9, r9
+	bsr	set_sr
+	 mov	#0, r10
+
+	bsr	save_low_regs
+	 nop
+
+	/* switch to bank 1, save low registers */
+	mov.l	rb_bit, r10
+	bsr	set_sr
+	 mov	#-1, r9
+
+	bsr	save_low_regs
+	 nop
+
+	/* switch back to bank 0 */
+	mov.l	rb_bit, r9
+	not	r9, r9
+	bsr	set_sr
+	 mov	#0, r10
+
+skip_regs_save:
+
+	/* save sp, also set to internal ram */
+	mov.l	r15, @(SH_SLEEP_SP, r5)
+	mov	r5, r15
+
+	/* save stbcr */
+	bsr     save_register
+	 mov    #SH_SLEEP_REG_STBCR, r0
+
+	/* save mmu and cache context if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_MMU, r0
+	bt	skip_mmu_save_disable
+
+	/* save mmu state */
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_PTEH, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_PTEL, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_TTB, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_TEA, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_MMUCR, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_PTEA, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_PASCR, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_IRMCR, r0
+
+	/* invalidate TLBs and disable the MMU */
+	bsr	get_register
+	 mov	#SH_SLEEP_REG_MMUCR, r0
+	mov	#4, r1
+	mov.l	r1, @r0
+	icbi	@r0
+
+	/* save cache registers and disable caches */
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_CCR, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_RAMCR, r0
+
+	bsr	get_register
+	 mov	#SH_SLEEP_REG_CCR, r0
+	mov	#0, r1
+	mov.l	r1, @r0
+	icbi	@r0
+
+skip_mmu_save_disable:
+	/* call self-refresh entering code if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_SF, r0
+	bt	skip_set_sf
+
+	mov.l	@(SH_SLEEP_SF_PRE, r5), r0
+	jsr	@r0
+	 nop
+
+skip_set_sf:
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_STANDBY, r0
+	bt	test_rstandby
+
+	/* set mode to "software standby mode" */
+	bra	do_sleep
+	 mov	#0x80, r1
+
+test_rstandby:
+	tst	#SUSP_SH_RSTANDBY, r0
+	bt	test_ustandby
+
+	/* setup BAR register */
+	bsr	get_register
+	 mov	#SH_SLEEP_REG_BAR, r0
+	mov.l	@(SH_SLEEP_RESUME, r5), r1
+	mov.l	r1, @r0
+
+	/* set mode to "r-standby mode" */
+	bra	do_sleep
+	 mov	#0x20, r1
+
+test_ustandby:
+	tst	#SUSP_SH_USTANDBY, r0
+	bt	force_sleep
+
+	/* set mode to "u-standby mode" */
+	bra	do_sleep
+	 mov	#0x10, r1
+
+force_sleep:
+
+	/* set mode to "sleep mode" */
+	mov	#0x00, r1
+
+do_sleep:
+	/* setup and enter selected standby mode */
+	bsr     get_register
+	 mov    #SH_SLEEP_REG_STBCR, r0
+	mov.l	r1, @r0
+again:
+	sleep
+	bra	again
+	 nop
+
+save_register:
+	add	#SH_SLEEP_BASE_ADDR, r0
+	mov.l	@(r0, r5), r1
+	add	#-SH_SLEEP_BASE_ADDR, r0
+	mov.l	@r1, r1
+	add	#SH_SLEEP_BASE_DATA, r0
+	mov.l	r1, @(r0, r5)
+	add	#-SH_SLEEP_BASE_DATA, r0
+	rts
+	 nop
+
+get_register:
+	add	#SH_SLEEP_BASE_ADDR, r0
+	mov.l	@(r0, r5), r0
+	rts
+	 nop
+
+set_sr:
+	stc	sr, r8
+	and	r9, r8
+	or	r10, r8
+	ldc	r8, sr
+	rts
+	 nop
+
+save_low_regs:
+	mov.l	r7, @-r15
+	mov.l	r6, @-r15
+	mov.l	r5, @-r15
+	mov.l	r4, @-r15
+	mov.l	r3, @-r15
+	mov.l	r2, @-r15
+	mov.l	r1, @-r15
+	rts
+	 mov.l	r0, @-r15
+
+	.balign 4
+rb_bit:	.long	0x20000000 ! RB=1
+
+ENTRY(sh_mobile_sleep_enter_end)
+
+	.balign 4
+ENTRY(sh_mobile_sleep_resume_start)
+
+	/* figure out start address */
+	bsr	0f
+	 nop
+0:
+	sts	pr, k1
+	mov.l	1f, k0
+	and	k0, k1
+
+	/* store pointer to data area in VBR */
+	ldc	k1, vbr
+
+	/* setup sr with saved sr */
+	mov.l	@(SH_SLEEP_SR, k1), k0
+	ldc	k0, sr
+
+	/* now: user register set! */
+	stc	vbr, r5
+
+	/* setup spc with return address to c code */
+	mov.l	@(SH_SLEEP_SPC, r5), r0
+	ldc	r0, spc
+
+	/* restore vbr */
+	mov.l	@(SH_SLEEP_VBR, r5), r0
+	ldc	r0, vbr
+
+	/* setup ssr with saved sr */
+	mov.l	@(SH_SLEEP_SR, r5), r0
+	ldc	r0, ssr
+
+	/* restore sp */
+	mov.l   @(SH_SLEEP_SP, r5), r15
+
+	/* restore sleep mode register */
+	bsr     restore_register
+	 mov    #SH_SLEEP_REG_STBCR, r0
+
+	/* call self-refresh resume code if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_SF, r0
+	bt	skip_restore_sf
+
+	mov.l	@(SH_SLEEP_SF_POST, r5), r0
+	jsr	@r0
+	 nop
+
+skip_restore_sf:
+	/* restore mmu and cache state if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_MMU, r0
+	bt	skip_restore_mmu
+
+	/* restore mmu state */
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_PTEH, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_PTEL, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_TTB, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_TEA, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_PTEA, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_PASCR, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_IRMCR, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_MMUCR, r0
+	icbi	@r0
+
+	/* restore cache settings */
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_RAMCR, r0
+	icbi	@r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_CCR, r0
+	icbi	@r0
+
+skip_restore_mmu:
+
+	/* restore general purpose registers if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_REGS, r0
+	bt	skip_restore_regs
+
+	/* switch to bank 1, restore low registers */
+	mov.l	_rb_bit, r10
+	bsr	_set_sr
+	 mov	#-1, r9
+
+	bsr	restore_low_regs
+	 nop
+
+	/* switch to bank0, restore low registers */
+	mov.l	_rb_bit, r9
+	not	r9, r9
+	bsr	_set_sr
+	 mov	#0, r10
+
+	bsr	restore_low_regs
+	 nop
+
+	/* restore the rest of the registers */
+	mov.l	@r15+, r8
+	mov.l	@r15+, r9
+	mov.l	@r15+, r10
+	mov.l	@r15+, r11
+	mov.l	@r15+, r12
+	mov.l	@r15+, r13
+	mov.l	@r15+, r14
+	lds.l	@r15+, pr
+
+skip_restore_regs:
+	rte
+	 nop
+
+restore_register:
+	add	#SH_SLEEP_BASE_DATA, r0
+	mov.l	@(r0, r5), r1
+	add	#-SH_SLEEP_BASE_DATA, r0
+	add	#SH_SLEEP_BASE_ADDR, r0
+	mov.l	@(r0, r5), r0
+	mov.l	r1, @r0
+	rts
+	 nop
+
+_set_sr:
+	stc	sr, r8
+	and	r9, r8
+	or	r10, r8
+	ldc	r8, sr
+	rts
+	 nop
+
+restore_low_regs:
+	mov.l	@r15+, r0
+	mov.l	@r15+, r1
+	mov.l	@r15+, r2
+	mov.l	@r15+, r3
+	mov.l	@r15+, r4
+	mov.l	@r15+, r5
+	mov.l	@r15+, r6
+	rts
+	 mov.l	@r15+, r7
+
+	.balign 4
+_rb_bit:	.long	0x20000000 ! RB=1
+1:	.long	~0x7ff
+ENTRY(sh_mobile_sleep_resume_end)