aboutsummaryrefslogtreecommitdiff
path: root/arch/sparc/vdso/vdso2c.h
diff options
context:
space:
mode:
authorLibravatar Linus Torvalds <torvalds@linux-foundation.org>2023-02-21 18:24:12 -0800
committerLibravatar Linus Torvalds <torvalds@linux-foundation.org>2023-02-21 18:24:12 -0800
commit5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 (patch)
treecc5c2d0a898769fd59549594fedb3ee6f84e59a0 /arch/sparc/vdso/vdso2c.h
downloadlinux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.tar.gz
linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.zip
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted
Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
Diffstat (limited to 'arch/sparc/vdso/vdso2c.h')
-rw-r--r--arch/sparc/vdso/vdso2c.h142
1 files changed, 142 insertions, 0 deletions
diff --git a/arch/sparc/vdso/vdso2c.h b/arch/sparc/vdso/vdso2c.h
new file mode 100644
index 000000000..60d69acc7
--- /dev/null
+++ b/arch/sparc/vdso/vdso2c.h
@@ -0,0 +1,142 @@
+/*
+ * Copyright (c) 2017 Oracle and/or its affiliates. All rights reserved.
+ */
+
+/*
+ * This file is included up to twice from vdso2c.c. It generates code for
+ * 32-bit and 64-bit vDSOs. We will eventually need both for 64-bit builds,
+ * since 32-bit vDSOs will then be built for 32-bit userspace.
+ */
+
+static void BITSFUNC(go)(void *raw_addr, size_t raw_len,
+ void *stripped_addr, size_t stripped_len,
+ FILE *outfile, const char *name)
+{
+ int found_load = 0;
+ unsigned long load_size = -1; /* Work around bogus warning */
+ unsigned long mapping_size;
+ int i;
+ unsigned long j;
+ ELF(Shdr) *symtab_hdr = NULL, *strtab_hdr;
+ ELF(Ehdr) *hdr = (ELF(Ehdr) *)raw_addr;
+ ELF(Dyn) *dyn = 0, *dyn_end = 0;
+ INT_BITS syms[NSYMS] = {};
+
+ ELF(Phdr) *pt = (ELF(Phdr) *)(raw_addr + GET_BE(&hdr->e_phoff));
+
+ /* Walk the segment table. */
+ for (i = 0; i < GET_BE(&hdr->e_phnum); i++) {
+ if (GET_BE(&pt[i].p_type) == PT_LOAD) {
+ if (found_load)
+ fail("multiple PT_LOAD segs\n");
+
+ if (GET_BE(&pt[i].p_offset) != 0 ||
+ GET_BE(&pt[i].p_vaddr) != 0)
+ fail("PT_LOAD in wrong place\n");
+
+ if (GET_BE(&pt[i].p_memsz) != GET_BE(&pt[i].p_filesz))
+ fail("cannot handle memsz != filesz\n");
+
+ load_size = GET_BE(&pt[i].p_memsz);
+ found_load = 1;
+ } else if (GET_BE(&pt[i].p_type) == PT_DYNAMIC) {
+ dyn = raw_addr + GET_BE(&pt[i].p_offset);
+ dyn_end = raw_addr + GET_BE(&pt[i].p_offset) +
+ GET_BE(&pt[i].p_memsz);
+ }
+ }
+ if (!found_load)
+ fail("no PT_LOAD seg\n");
+
+ if (stripped_len < load_size)
+ fail("stripped input is too short\n");
+
+ /* Walk the dynamic table */
+ for (i = 0; dyn + i < dyn_end &&
+ GET_BE(&dyn[i].d_tag) != DT_NULL; i++) {
+ typeof(dyn[i].d_tag) tag = GET_BE(&dyn[i].d_tag);
+ typeof(dyn[i].d_un.d_val) val = GET_BE(&dyn[i].d_un.d_val);
+
+ if ((tag == DT_RELSZ || tag == DT_RELASZ) && (val != 0))
+ fail("vdso image contains dynamic relocations\n");
+ }
+
+ /* Walk the section table */
+ for (i = 0; i < GET_BE(&hdr->e_shnum); i++) {
+ ELF(Shdr) *sh = raw_addr + GET_BE(&hdr->e_shoff) +
+ GET_BE(&hdr->e_shentsize) * i;
+ if (GET_BE(&sh->sh_type) == SHT_SYMTAB)
+ symtab_hdr = sh;
+ }
+
+ if (!symtab_hdr)
+ fail("no symbol table\n");
+
+ strtab_hdr = raw_addr + GET_BE(&hdr->e_shoff) +
+ GET_BE(&hdr->e_shentsize) * GET_BE(&symtab_hdr->sh_link);
+
+ /* Walk the symbol table */
+ for (i = 0;
+ i < GET_BE(&symtab_hdr->sh_size) / GET_BE(&symtab_hdr->sh_entsize);
+ i++) {
+ int k;
+
+ ELF(Sym) *sym = raw_addr + GET_BE(&symtab_hdr->sh_offset) +
+ GET_BE(&symtab_hdr->sh_entsize) * i;
+ const char *name = raw_addr + GET_BE(&strtab_hdr->sh_offset) +
+ GET_BE(&sym->st_name);
+
+ for (k = 0; k < NSYMS; k++) {
+ if (!strcmp(name, required_syms[k].name)) {
+ if (syms[k]) {
+ fail("duplicate symbol %s\n",
+ required_syms[k].name);
+ }
+
+ /*
+ * Careful: we use negative addresses, but
+ * st_value is unsigned, so we rely
+ * on syms[k] being a signed type of the
+ * correct width.
+ */
+ syms[k] = GET_BE(&sym->st_value);
+ }
+ }
+ }
+
+ /* Validate mapping addresses. */
+ if (syms[sym_vvar_start] % 8192)
+ fail("vvar_begin must be a multiple of 8192\n");
+
+ if (!name) {
+ fwrite(stripped_addr, stripped_len, 1, outfile);
+ return;
+ }
+
+ mapping_size = (stripped_len + 8191) / 8192 * 8192;
+
+ fprintf(outfile, "/* AUTOMATICALLY GENERATED -- DO NOT EDIT */\n\n");
+ fprintf(outfile, "#include <linux/cache.h>\n");
+ fprintf(outfile, "#include <asm/vdso.h>\n");
+ fprintf(outfile, "\n");
+ fprintf(outfile,
+ "static unsigned char raw_data[%lu] __ro_after_init __aligned(8192)= {",
+ mapping_size);
+ for (j = 0; j < stripped_len; j++) {
+ if (j % 10 == 0)
+ fprintf(outfile, "\n\t");
+ fprintf(outfile, "0x%02X, ",
+ (int)((unsigned char *)stripped_addr)[j]);
+ }
+ fprintf(outfile, "\n};\n\n");
+
+ fprintf(outfile, "const struct vdso_image %s_builtin = {\n", name);
+ fprintf(outfile, "\t.data = raw_data,\n");
+ fprintf(outfile, "\t.size = %lu,\n", mapping_size);
+ for (i = 0; i < NSYMS; i++) {
+ if (required_syms[i].export && syms[i])
+ fprintf(outfile, "\t.sym_%s = %" PRIi64 ",\n",
+ required_syms[i].name, (int64_t)syms[i]);
+ }
+ fprintf(outfile, "};\n");
+}