Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 245 insertions, 0 deletions

diff --git a/arch/um/Kconfig b/arch/um/Kconfig
new file mode 100644
index 000000000..ad4ff3b0e
--- /dev/null
+++ b/arch/um/Kconfig
@@ -0,0 +1,245 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "UML-specific options"
+
+config UML
+	bool
+	default y
+	select ARCH_EPHEMERAL_INODES
+	select ARCH_HAS_FORTIFY_SOURCE
+	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_HAS_KCOV
+	select ARCH_HAS_STRNCPY_FROM_USER
+	select ARCH_HAS_STRNLEN_USER
+	select ARCH_NO_PREEMPT
+	select HAVE_ARCH_AUDITSYSCALL
+	select HAVE_ARCH_KASAN if X86_64
+	select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
+	select HAVE_ARCH_SECCOMP_FILTER
+	select HAVE_ASM_MODVERSIONS
+	select HAVE_UID16
+	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DEBUG_BUGVERBOSE
+	select NO_DMA if !UML_DMA_EMULATION
+	select OF_EARLY_FLATTREE if OF
+	select GENERIC_IRQ_SHOW
+	select GENERIC_CPU_DEVICES
+	select HAVE_GCC_PLUGINS
+	select TRACE_IRQFLAGS_SUPPORT
+	select TTY # Needed for line.c
+	select HAVE_ARCH_VMAP_STACK
+
+config MMU
+	bool
+	default y
+
+config UML_DMA_EMULATION
+	bool
+
+config NO_IOMEM
+	bool "disable IOMEM" if EXPERT
+	depends on !INDIRECT_IOMEM
+	default y
+
+config UML_IOMEM_EMULATION
+	bool
+	select INDIRECT_IOMEM
+	select GENERIC_PCI_IOMAP
+	select GENERIC_IOMAP
+	select NO_GENERIC_PCI_IOPORT_MAP
+
+config NO_IOPORT_MAP
+	def_bool y
+
+config ISA
+	bool
+
+config SBUS
+	bool
+
+config LOCKDEP_SUPPORT
+	bool
+	default y
+
+config STACKTRACE_SUPPORT
+	bool
+	default y
+	select STACKTRACE
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+config HZ
+	int
+	default 100
+
+config NR_CPUS
+	int
+	range 1 1
+	default 1
+
+config ARCH_HAS_CACHE_LINE_SIZE
+	def_bool y
+
+source "arch/$(HEADER_ARCH)/um/Kconfig"
+
+config MAY_HAVE_RUNTIME_DEPS
+	bool
+
+config STATIC_LINK
+	bool "Force a static link"
+	depends on CC_CAN_LINK_STATIC_NO_RUNTIME_DEPS || !MAY_HAVE_RUNTIME_DEPS
+	help
+	  This option gives you the ability to force a static link of UML.
+	  Normally, UML is linked as a shared binary.  This is inconvenient for
+	  use in a chroot jail.  So, if you intend to run UML inside a chroot,
+	  you probably want to say Y here.
+	  Additionally, this option enables using higher memory spaces (up to
+	  2.75G) for UML.
+
+	  NOTE: This option is incompatible with some networking features which
+	  depend on features that require being dynamically loaded (like NSS).
+
+config LD_SCRIPT_STATIC
+	bool
+	default y
+	depends on STATIC_LINK
+
+config LD_SCRIPT_DYN
+	bool
+	default y
+	depends on !LD_SCRIPT_STATIC
+
+config LD_SCRIPT_DYN_RPATH
+	bool "set rpath in the binary" if EXPERT
+	default y
+	depends on LD_SCRIPT_DYN
+	help
+	  Add /lib (and /lib64 for 64-bit) to the linux binary's rpath
+	  explicitly.
+
+	  You may need to turn this off if compiling for nix systems
+	  that have their libraries in random /nix directories and
+	  might otherwise unexpected use libraries from /lib or /lib64
+	  instead of the desired ones.
+
+config HOSTFS
+	tristate "Host filesystem"
+	help
+	  While the User-Mode Linux port uses its own root file system for
+	  booting and normal file access, this module lets the UML user
+	  access files stored on the host.  It does not require any
+	  network connection between the Host and UML.  An example use of
+	  this might be:
+
+	  mount none /tmp/fromhost -t hostfs -o /tmp/umlshare
+
+	  where /tmp/fromhost is an empty directory inside UML and
+	  /tmp/umlshare is a directory on the host with files the UML user
+	  wishes to access.
+
+	  For more information, see
+	  <http://user-mode-linux.sourceforge.net/hostfs.html>.
+
+	  If you'd like to be able to work with files stored on the host,
+	  say Y or M here; otherwise say N.
+
+config MCONSOLE
+	bool "Management console"
+	depends on PROC_FS
+	default y
+	help
+	  The user mode linux management console is a low-level interface to
+	  the kernel, somewhat like the i386 SysRq interface.  Since there is
+	  a full-blown operating system running under every user mode linux
+	  instance, there is much greater flexibility possible than with the
+	  SysRq mechanism.
+
+	  If you answer 'Y' to this option, to use this feature, you need the
+	  mconsole client (called uml_mconsole) which is present in CVS in
+	  2.4.5-9um and later (path /tools/mconsole), and is also in the
+	  distribution RPM package in 2.4.6 and later.
+
+	  It is safe to say 'Y' here.
+
+config MAGIC_SYSRQ
+	bool "Magic SysRq key"
+	depends on MCONSOLE
+	help
+	  If you say Y here, you will have some control over the system even
+	  if the system crashes for example during kernel debugging (e.g., you
+	  will be able to flush the buffer cache to disk, reboot the system
+	  immediately or dump some status information). A key for each of the
+	  possible requests is provided.
+
+	  This is the feature normally accomplished by pressing a key
+	  while holding SysRq (Alt+PrintScreen).
+
+	  On UML, this is accomplished by sending a "sysrq" command with
+	  mconsole, followed by the letter for the requested command.
+
+	  The keys are documented in <file:Documentation/admin-guide/sysrq.rst>. Don't say Y
+	  unless you really know what this hack does.
+
+config KERNEL_STACK_ORDER
+	int "Kernel stack size order"
+	default 2 if 64BIT
+	range 2 10 if 64BIT
+	default 1 if !64BIT
+	help
+	  This option determines the size of UML kernel stacks.  They will
+	  be 1 << order pages.  The default is OK unless you're running Valgrind
+	  on UML, in which case, set this to 3.
+	  It is possible to reduce the stack to 1 for 64BIT and 0 for 32BIT on
+	  older (pre-2017) CPUs. It is not recommended on newer CPUs due to the
+	  increase in the size of the state which needs to be saved when handling
+	  signals.
+
+config MMAPPER
+	tristate "iomem emulation driver"
+	help
+	  This driver allows a host file to be used as emulated IO memory inside
+	  UML.
+
+config PGTABLE_LEVELS
+	int
+	default 3 if 3_LEVEL_PGTABLES
+	default 2
+
+config UML_TIME_TRAVEL_SUPPORT
+	bool
+	prompt "Support time-travel mode (e.g. for test execution)"
+	# inf-cpu mode is incompatible with the benchmarking
+	depends on !RAID6_PQ_BENCHMARK
+	depends on !SMP
+	help
+	  Enable this option to support time travel inside the UML instance.
+
+	  After enabling this option, two modes are accessible at runtime
+	  (selected by the kernel command line), see the kernel's command-
+	  line help for more details.
+
+	  It is safe to say Y, but you probably don't need this.
+
+config KASAN_SHADOW_OFFSET
+	hex
+	depends on KASAN
+	default 0x100000000000
+	help
+	  This is the offset at which the ~16TB of shadow memory is
+	  mapped and used by KASAN for memory debugging. This can be any
+	  address that has at least KASAN_SHADOW_SIZE (total address space divided
+	  by 8) amount of space so that the KASAN shadow memory does not conflict
+	  with anything. The default is 0x100000000000, which works even if mem is
+	  set to a large value. On low-memory systems, try 0x7fff8000, as it fits
+	  into the immediate of most instructions, improving performance.
+
+endmenu
+
+source "arch/um/drivers/Kconfig"
+
+config ARCH_SUSPEND_POSSIBLE
+	def_bool y
+
+source "kernel/power/Kconfig"