Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 157 insertions, 0 deletions

diff --git a/arch/um/Makefile b/arch/um/Makefile
new file mode 100644
index 000000000..f1d4d6715
--- /dev/null
+++ b/arch/um/Makefile
@@ -0,0 +1,157 @@
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+# Licensed under the GPL
+#
+
+# select defconfig based on actual architecture
+ifeq ($(SUBARCH),x86)
+  ifeq ($(shell uname -m),x86_64)
+        KBUILD_DEFCONFIG := x86_64_defconfig
+  else
+        KBUILD_DEFCONFIG := i386_defconfig
+  endif
+else
+        KBUILD_DEFCONFIG := $(SUBARCH)_defconfig
+endif
+
+ARCH_DIR := arch/um
+OS := $(shell uname -s)
+# We require bash because the vmlinux link and loader script cpp use bash
+# features.
+SHELL := /bin/bash
+
+core-y			+= $(ARCH_DIR)/kernel/		\
+			   $(ARCH_DIR)/drivers/		\
+			   $(ARCH_DIR)/os-$(OS)/
+
+MODE_INCLUDE	+= -I$(srctree)/$(ARCH_DIR)/include/shared/skas
+
+HEADER_ARCH 	:= $(SUBARCH)
+
+ifneq ($(filter $(SUBARCH),x86 x86_64 i386),)
+	HEADER_ARCH := x86
+endif
+
+ifdef CONFIG_64BIT
+	KBUILD_CFLAGS += -mcmodel=large
+endif
+
+HOST_DIR := arch/$(HEADER_ARCH)
+
+include $(srctree)/$(ARCH_DIR)/Makefile-skas
+include $(srctree)/$(HOST_DIR)/Makefile.um
+
+core-y += $(HOST_DIR)/um/
+
+SHARED_HEADERS	:= $(ARCH_DIR)/include/shared
+ARCH_INCLUDE	:= -I$(srctree)/$(SHARED_HEADERS)
+ARCH_INCLUDE	+= -I$(srctree)/$(HOST_DIR)/um/shared
+KBUILD_CPPFLAGS += -I$(srctree)/$(HOST_DIR)/um
+
+# -Dvmap=kernel_vmap prevents anything from referencing the libpcap.o symbol so
+# named - it's a common symbol in libpcap, so we get a binary which crashes.
+#
+# Same things for in6addr_loopback and mktime - found in libc. For these two we
+# only get link-time error, luckily.
+#
+# -Dlongjmp=kernel_longjmp prevents anything from referencing the libpthread.a
+# embedded copy of longjmp, same thing for setjmp.
+#
+# These apply to USER_CFLAGS to.
+
+KBUILD_CFLAGS += $(CFLAGS) $(CFLAGS-y) -D__arch_um__ \
+	$(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap	\
+	-Dlongjmp=kernel_longjmp -Dsetjmp=kernel_setjmp \
+	-Din6addr_loopback=kernel_in6addr_loopback \
+	-Din6addr_any=kernel_in6addr_any -Dstrrchr=kernel_strrchr
+
+KBUILD_AFLAGS += $(ARCH_INCLUDE)
+
+USER_CFLAGS = $(patsubst $(KERNEL_DEFINES),,$(patsubst -I%,,$(KBUILD_CFLAGS))) \
+		$(ARCH_INCLUDE) $(MODE_INCLUDE) $(filter -I%,$(CFLAGS)) \
+		-D_FILE_OFFSET_BITS=64 -idirafter $(srctree)/include \
+		-idirafter $(objtree)/include -D__KERNEL__ -D__UM_HOST__
+
+#This will adjust *FLAGS accordingly to the platform.
+include $(srctree)/$(ARCH_DIR)/Makefile-os-$(OS)
+
+KBUILD_CPPFLAGS += -I$(srctree)/$(HOST_DIR)/include \
+		   -I$(srctree)/$(HOST_DIR)/include/uapi \
+		   -I$(objtree)/$(HOST_DIR)/include/generated \
+		   -I$(objtree)/$(HOST_DIR)/include/generated/uapi
+
+# -Derrno=kernel_errno - This turns all kernel references to errno into
+# kernel_errno to separate them from the libc errno.  This allows -fno-common
+# in KBUILD_CFLAGS.  Otherwise, it would cause ld to complain about the two different
+# errnos.
+# These apply to kernelspace only.
+#
+# strip leading and trailing whitespace to make the USER_CFLAGS removal of these
+# defines more robust
+
+KERNEL_DEFINES = $(strip -Derrno=kernel_errno -Dsigprocmask=kernel_sigprocmask \
+			 -Dmktime=kernel_mktime $(ARCH_KERNEL_DEFINES))
+KBUILD_CFLAGS += $(KERNEL_DEFINES)
+
+PHONY += linux
+
+all: linux
+
+linux: vmlinux
+	@echo '  LINK $@'
+	$(Q)ln -f $< $@
+
+define archhelp
+  echo '* linux		- Binary kernel image (./linux) - for backward'
+  echo '		   compatibility only, this creates a hard link to the'
+  echo '		   real kernel binary, the "vmlinux" binary you'
+  echo '		   find in the kernel root.'
+endef
+
+archheaders:
+	$(Q)$(MAKE) -f $(srctree)/Makefile ARCH=$(HEADER_ARCH) asm-generic archheaders
+
+archprepare:
+	$(Q)$(MAKE) $(build)=$(HOST_DIR)/um include/generated/user_constants.h
+
+LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static
+LINK-$(CONFIG_LD_SCRIPT_DYN) += $(call cc-option, -no-pie)
+LINK-$(CONFIG_LD_SCRIPT_DYN_RPATH) += -Wl,-rpath,/lib
+
+CFLAGS_NO_HARDENING := $(call cc-option, -fno-PIC,) $(call cc-option, -fno-pic,) \
+	-fno-stack-protector $(call cc-option, -fno-stack-protector-all)
+
+# Options used by linker script
+export LDS_START      := $(START)
+export LDS_ELF_ARCH   := $(ELF_ARCH)
+export LDS_ELF_FORMAT := $(ELF_FORMAT)
+
+# The wrappers will select whether using "malloc" or the kernel allocator.
+LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc
+
+# Avoid binutils 2.39+ warnings by marking the stack non-executable and
+# ignorning warnings for the kallsyms sections.
+LDFLAGS_EXECSTACK = -z noexecstack
+ifeq ($(CONFIG_LD_IS_BFD),y)
+LDFLAGS_EXECSTACK += $(call ld-option,--no-warn-rwx-segments)
+endif
+
+LD_FLAGS_CMDLINE = $(foreach opt,$(KBUILD_LDFLAGS),-Wl,$(opt))
+
+# Used by link-vmlinux.sh which has special support for um link
+export CFLAGS_vmlinux := $(LINK-y) $(LINK_WRAPS) $(LD_FLAGS_CMDLINE)
+export LDFLAGS_vmlinux := $(LDFLAGS_EXECSTACK)
+
+# When cleaning we don't include .config, so we don't include
+# TT or skas makefiles and don't clean skas_ptregs.h.
+CLEAN_FILES += linux x.i gmon.out
+MRPROPER_FILES += arch/$(SUBARCH)/include/generated
+
+archclean:
+	@find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \
+		-o -name '*.gcov' \) -type f -print | xargs rm -f
+
+export HEADER_ARCH SUBARCH USER_CFLAGS CFLAGS_NO_HARDENING OS DEV_NULL_PATH