Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 271 insertions, 0 deletions

diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c
new file mode 100644
index 000000000..4c9576452
--- /dev/null
+++ b/arch/um/drivers/net_user.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ */
+
+#include <stdio.h>
+#include <unistd.h>
+#include <stdarg.h>
+#include <errno.h>
+#include <stddef.h>
+#include <string.h>
+#include <sys/socket.h>
+#include <sys/wait.h>
+#include <net_user.h>
+#include <os.h>
+#include <um_malloc.h>
+
+int tap_open_common(void *dev, char *gate_addr)
+{
+	int tap_addr[4];
+
+	if (gate_addr == NULL)
+		return 0;
+	if (sscanf(gate_addr, "%d.%d.%d.%d", &tap_addr[0],
+		  &tap_addr[1], &tap_addr[2], &tap_addr[3]) != 4) {
+		printk(UM_KERN_ERR "Invalid tap IP address - '%s'\n",
+		       gate_addr);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+void tap_check_ips(char *gate_addr, unsigned char *eth_addr)
+{
+	int tap_addr[4];
+
+	if ((gate_addr != NULL) &&
+	    (sscanf(gate_addr, "%d.%d.%d.%d", &tap_addr[0],
+		    &tap_addr[1], &tap_addr[2], &tap_addr[3]) == 4) &&
+	    (eth_addr[0] == tap_addr[0]) &&
+	    (eth_addr[1] == tap_addr[1]) &&
+	    (eth_addr[2] == tap_addr[2]) &&
+	    (eth_addr[3] == tap_addr[3])) {
+		printk(UM_KERN_ERR "The tap IP address and the UML eth IP "
+		       "address must be different\n");
+	}
+}
+
+/* Do reliable error handling as this fails frequently enough. */
+void read_output(int fd, char *output, int len)
+{
+	int remain, ret, expected;
+	char c;
+	char *str;
+
+	if (output == NULL) {
+		output = &c;
+		len = sizeof(c);
+	}
+
+	*output = '\0';
+	ret = read(fd, &remain, sizeof(remain));
+
+	if (ret != sizeof(remain)) {
+		if (ret < 0)
+			ret = -errno;
+		expected = sizeof(remain);
+		str = "length";
+		goto err;
+	}
+
+	while (remain != 0) {
+		expected = (remain < len) ? remain : len;
+		ret = read(fd, output, expected);
+		if (ret != expected) {
+			if (ret < 0)
+				ret = -errno;
+			str = "data";
+			goto err;
+		}
+		remain -= ret;
+	}
+
+	return;
+
+err:
+	if (ret < 0)
+		printk(UM_KERN_ERR "read_output - read of %s failed, "
+		       "errno = %d\n", str, -ret);
+	else
+		printk(UM_KERN_ERR "read_output - read of %s failed, read only "
+		       "%d of %d bytes\n", str, ret, expected);
+}
+
+int net_read(int fd, void *buf, int len)
+{
+	int n;
+
+	n = read(fd,  buf,  len);
+
+	if ((n < 0) && (errno == EAGAIN))
+		return 0;
+	else if (n == 0)
+		return -ENOTCONN;
+	return n;
+}
+
+int net_recvfrom(int fd, void *buf, int len)
+{
+	int n;
+
+	CATCH_EINTR(n = recvfrom(fd,  buf,  len, 0, NULL, NULL));
+	if (n < 0) {
+		if (errno == EAGAIN)
+			return 0;
+		return -errno;
+	}
+	else if (n == 0)
+		return -ENOTCONN;
+	return n;
+}
+
+int net_write(int fd, void *buf, int len)
+{
+	int n;
+
+	n = write(fd, buf, len);
+
+	if ((n < 0) && (errno == EAGAIN))
+		return 0;
+	else if (n == 0)
+		return -ENOTCONN;
+	return n;
+}
+
+int net_send(int fd, void *buf, int len)
+{
+	int n;
+
+	CATCH_EINTR(n = send(fd, buf, len, 0));
+	if (n < 0) {
+		if (errno == EAGAIN)
+			return 0;
+		return -errno;
+	}
+	else if (n == 0)
+		return -ENOTCONN;
+	return n;
+}
+
+int net_sendto(int fd, void *buf, int len, void *to, int sock_len)
+{
+	int n;
+
+	CATCH_EINTR(n = sendto(fd, buf, len, 0, (struct sockaddr *) to,
+			       sock_len));
+	if (n < 0) {
+		if (errno == EAGAIN)
+			return 0;
+		return -errno;
+	}
+	else if (n == 0)
+		return -ENOTCONN;
+	return n;
+}
+
+struct change_pre_exec_data {
+	int close_me;
+	int stdout_fd;
+};
+
+static void change_pre_exec(void *arg)
+{
+	struct change_pre_exec_data *data = arg;
+
+	close(data->close_me);
+	dup2(data->stdout_fd, 1);
+}
+
+static int change_tramp(char **argv, char *output, int output_len)
+{
+	int pid, fds[2], err;
+	struct change_pre_exec_data pe_data;
+
+	err = os_pipe(fds, 1, 0);
+	if (err < 0) {
+		printk(UM_KERN_ERR "change_tramp - pipe failed, err = %d\n",
+		       -err);
+		return err;
+	}
+	pe_data.close_me = fds[0];
+	pe_data.stdout_fd = fds[1];
+	pid = run_helper(change_pre_exec, &pe_data, argv);
+
+	if (pid > 0)	/* Avoid hang as we won't get data in failure case. */
+		read_output(fds[0], output, output_len);
+
+	close(fds[0]);
+	close(fds[1]);
+
+	if (pid > 0)
+		helper_wait(pid);
+	return pid;
+}
+
+static void change(char *dev, char *what, unsigned char *addr,
+		   unsigned char *netmask)
+{
+	char addr_buf[sizeof("255.255.255.255\0")];
+	char netmask_buf[sizeof("255.255.255.255\0")];
+	char version[sizeof("nnnnn\0")];
+	char *argv[] = { "uml_net", version, what, dev, addr_buf,
+			 netmask_buf, NULL };
+	char *output;
+	int output_len, pid;
+
+	sprintf(version, "%d", UML_NET_VERSION);
+	sprintf(addr_buf, "%d.%d.%d.%d", addr[0], addr[1], addr[2], addr[3]);
+	sprintf(netmask_buf, "%d.%d.%d.%d", netmask[0], netmask[1],
+		netmask[2], netmask[3]);
+
+	output_len = UM_KERN_PAGE_SIZE;
+	output = uml_kmalloc(output_len, UM_GFP_KERNEL);
+	if (output == NULL)
+		printk(UM_KERN_ERR "change : failed to allocate output "
+		       "buffer\n");
+
+	pid = change_tramp(argv, output, output_len);
+	if (pid < 0) {
+		kfree(output);
+		return;
+	}
+
+	if (output != NULL) {
+		printk("%s", output);
+		kfree(output);
+	}
+}
+
+void open_addr(unsigned char *addr, unsigned char *netmask, void *arg)
+{
+	change(arg, "add", addr, netmask);
+}
+
+void close_addr(unsigned char *addr, unsigned char *netmask, void *arg)
+{
+	change(arg, "del", addr, netmask);
+}
+
+char *split_if_spec(char *str, ...)
+{
+	char **arg, *end, *ret = NULL;
+	va_list ap;
+
+	va_start(ap, str);
+	while ((arg = va_arg(ap, char **)) != NULL) {
+		if (*str == '\0')
+			goto out;
+		end = strchr(str, ',');
+		if (end != str)
+			*arg = str;
+		if (end == NULL)
+			goto out;
+		*end++ = '\0';
+		str = end;
+	}
+	ret = str;
+out:
+	va_end(ap);
+	return ret;
+}