Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 232 insertions, 0 deletions

diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
new file mode 100644
index 000000000..8530b2e08
--- /dev/null
+++ b/arch/um/os-Linux/mem.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ */
+
+#include <stdio.h>
+#include <stddef.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+#include <sys/vfs.h>
+#include <linux/magic.h>
+#include <init.h>
+#include <os.h>
+
+/*
+ * kasan_map_memory - maps memory from @start with a size of @len.
+ * The allocated memory is filled with zeroes upon success.
+ * @start: the start address of the memory to be mapped
+ * @len: the length of the memory to be mapped
+ *
+ * This function is used to map shadow memory for KASAN in uml
+ */
+void kasan_map_memory(void *start, size_t len)
+{
+	if (mmap(start,
+		 len,
+		 PROT_READ|PROT_WRITE,
+		 MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE|MAP_NORESERVE,
+		 -1,
+		 0) == MAP_FAILED) {
+		os_info("Couldn't allocate shadow memory: %s\n.",
+			strerror(errno));
+		exit(1);
+	}
+}
+
+/* Set by make_tempfile() during early boot. */
+static char *tempdir = NULL;
+
+/* Check if dir is on tmpfs. Return 0 if yes, -1 if no or error. */
+static int __init check_tmpfs(const char *dir)
+{
+	struct statfs st;
+
+	os_info("Checking if %s is on tmpfs...", dir);
+	if (statfs(dir, &st) < 0) {
+		os_info("%s\n", strerror(errno));
+	} else if (st.f_type != TMPFS_MAGIC) {
+		os_info("no\n");
+	} else {
+		os_info("OK\n");
+		return 0;
+	}
+	return -1;
+}
+
+/*
+ * Choose the tempdir to use. We want something on tmpfs so that our memory is
+ * not subject to the host's vm.dirty_ratio. If a tempdir is specified in the
+ * environment, we use that even if it's not on tmpfs, but we warn the user.
+ * Otherwise, we try common tmpfs locations, and if no tmpfs directory is found
+ * then we fall back to /tmp.
+ */
+static char * __init choose_tempdir(void)
+{
+	static const char * const vars[] = {
+		"TMPDIR",
+		"TMP",
+		"TEMP",
+		NULL
+	};
+	static const char fallback_dir[] = "/tmp";
+	static const char * const tmpfs_dirs[] = {
+		"/dev/shm",
+		fallback_dir,
+		NULL
+	};
+	int i;
+	const char *dir;
+
+	os_info("Checking environment variables for a tempdir...");
+	for (i = 0; vars[i]; i++) {
+		dir = getenv(vars[i]);
+		if ((dir != NULL) && (*dir != '\0')) {
+			os_info("%s\n", dir);
+			if (check_tmpfs(dir) >= 0)
+				goto done;
+			else
+				goto warn;
+		}
+	}
+	os_info("none found\n");
+
+	for (i = 0; tmpfs_dirs[i]; i++) {
+		dir = tmpfs_dirs[i];
+		if (check_tmpfs(dir) >= 0)
+			goto done;
+	}
+
+	dir = fallback_dir;
+warn:
+	os_warn("Warning: tempdir %s is not on tmpfs\n", dir);
+done:
+	/* Make a copy since getenv results may not remain valid forever. */
+	return strdup(dir);
+}
+
+/*
+ * Create an unlinked tempfile in a suitable tempdir. template must be the
+ * basename part of the template with a leading '/'.
+ */
+static int __init make_tempfile(const char *template)
+{
+	char *tempname;
+	int fd;
+
+	if (tempdir == NULL) {
+		tempdir = choose_tempdir();
+		if (tempdir == NULL) {
+			os_warn("Failed to choose tempdir: %s\n",
+				strerror(errno));
+			return -1;
+		}
+	}
+
+#ifdef O_TMPFILE
+	fd = open(tempdir, O_CLOEXEC | O_RDWR | O_EXCL | O_TMPFILE, 0700);
+	/*
+	 * If the running system does not support O_TMPFILE flag then retry
+	 * without it.
+	 */
+	if (fd != -1 || (errno != EINVAL && errno != EISDIR &&
+			errno != EOPNOTSUPP))
+		return fd;
+#endif
+
+	tempname = malloc(strlen(tempdir) + strlen(template) + 1);
+	if (tempname == NULL)
+		return -1;
+
+	strcpy(tempname, tempdir);
+	strcat(tempname, template);
+	fd = mkstemp(tempname);
+	if (fd < 0) {
+		os_warn("open - cannot create %s: %s\n", tempname,
+			strerror(errno));
+		goto out;
+	}
+	if (unlink(tempname) < 0) {
+		perror("unlink");
+		goto close;
+	}
+	free(tempname);
+	return fd;
+close:
+	close(fd);
+out:
+	free(tempname);
+	return -1;
+}
+
+#define TEMPNAME_TEMPLATE "/vm_file-XXXXXX"
+
+static int __init create_tmp_file(unsigned long long len)
+{
+	int fd, err;
+	char zero;
+
+	fd = make_tempfile(TEMPNAME_TEMPLATE);
+	if (fd < 0)
+		exit(1);
+
+	/*
+	 * Seek to len - 1 because writing a character there will
+	 * increase the file size by one byte, to the desired length.
+	 */
+	if (lseek64(fd, len - 1, SEEK_SET) < 0) {
+		perror("lseek64");
+		exit(1);
+	}
+
+	zero = 0;
+
+	err = write(fd, &zero, 1);
+	if (err != 1) {
+		perror("write");
+		exit(1);
+	}
+
+	return fd;
+}
+
+int __init create_mem_file(unsigned long long len)
+{
+	int err, fd;
+
+	fd = create_tmp_file(len);
+
+	err = os_set_exec_close(fd);
+	if (err < 0) {
+		errno = -err;
+		perror("exec_close");
+	}
+	return fd;
+}
+
+void __init check_tmpexec(void)
+{
+	void *addr;
+	int err, fd = create_tmp_file(UM_KERN_PAGE_SIZE);
+
+	addr = mmap(NULL, UM_KERN_PAGE_SIZE,
+		    PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE, fd, 0);
+	os_info("Checking PROT_EXEC mmap in %s...", tempdir);
+	if (addr == MAP_FAILED) {
+		err = errno;
+		os_warn("%s\n", strerror(err));
+		close(fd);
+		if (err == EPERM)
+			os_warn("%s must be not mounted noexec\n", tempdir);
+		exit(1);
+	}
+	os_info("OK\n");
+	munmap(addr, UM_KERN_PAGE_SIZE);
+
+	close(fd);
+}