Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 272 insertions, 0 deletions

diff --git a/arch/x86/boot/genimage.sh b/arch/x86/boot/genimage.sh
new file mode 100644
index 000000000..c9299aeb7
--- /dev/null
+++ b/arch/x86/boot/genimage.sh
@@ -0,0 +1,272 @@
+#!/bin/bash
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2017 by Changbin Du <changbin.du@intel.com>
+#
+# Adapted from code in arch/x86/boot/Makefile by H. Peter Anvin and others
+#
+# "make fdimage/fdimage144/fdimage288/hdimage/isoimage"
+# script for x86 architecture
+#
+# Arguments:
+#   $1  - fdimage format
+#   $2  - target image file
+#   $3  - kernel bzImage file
+#   $4  - mtools configuration file
+#   $5  - kernel cmdline
+#   $6+ - initrd image file(s)
+#
+# This script requires:
+#   bash
+#   syslinux
+#   mtools (for fdimage* and hdimage)
+#   edk2/OVMF (for hdimage)
+#
+# Otherwise try to stick to POSIX shell commands...
+#
+
+# Use "make V=1" to debug this script
+case "${KBUILD_VERBOSE}" in
+*1*)
+        set -x
+        ;;
+esac
+
+# Exit the top-level shell with an error
+topshell=$$
+trap 'exit 1' USR1
+die() {
+	echo ""        1>&2
+	echo " *** $*" 1>&2
+	echo ""        1>&2
+	kill -USR1 $topshell
+}
+
+# Verify the existence and readability of a file
+verify() {
+	if [ ! -f "$1" -o ! -r "$1" ]; then
+		die "Missing file: $1"
+	fi
+}
+
+diskfmt="$1"
+FIMAGE="$2"
+FBZIMAGE="$3"
+MTOOLSRC="$4"
+KCMDLINE="$5"
+shift 5				# Remaining arguments = initrd files
+
+export MTOOLSRC
+
+# common options for dd
+dd='dd iflag=fullblock'
+
+# Make sure the files actually exist
+verify "$FBZIMAGE"
+
+declare -a FDINITRDS
+irdpfx=' initrd='
+initrdopts_syslinux=''
+initrdopts_efi=''
+for f in "$@"; do
+	if [ -f "$f" -a -r "$f" ]; then
+	    FDINITRDS=("${FDINITRDS[@]}" "$f")
+	    fname="$(basename "$f")"
+	    initrdopts_syslinux="${initrdopts_syslinux}${irdpfx}${fname}"
+	    irdpfx=,
+	    initrdopts_efi="${initrdopts_efi} initrd=${fname}"
+	fi
+done
+
+# Read a $3-byte littleendian unsigned value at offset $2 from file $1
+le() {
+	local n=0
+	local m=1
+	for b in $(od -A n -v -j $2 -N $3 -t u1 "$1"); do
+		n=$((n + b*m))
+		m=$((m * 256))
+	done
+	echo $n
+}
+
+# Get the EFI architecture name such that boot{name}.efi is the default
+# boot file name. Returns false with no output if the file is not an
+# EFI image or otherwise unknown.
+efiarch() {
+	[ -f "$1" ] || return
+	[ $(le "$1" 0 2) -eq 23117 ] || return		# MZ magic
+	peoffs=$(le "$1" 60 4)				# PE header offset
+	[ $peoffs -ge 64 ] || return
+	[ $(le "$1" $peoffs 4) -eq 17744 ] || return	# PE magic
+	case $(le "$1" $((peoffs+4+20)) 2) in		# PE type
+		267)	;;				# PE32
+		523)	;;				# PE32+
+		*) return 1 ;;				# Invalid
+	esac
+	[ $(le "$1" $((peoffs+4+20+68)) 2) -eq 10 ] || return # EFI app
+	case $(le "$1" $((peoffs+4)) 2) in		# Machine type
+		 332)	echo i386	;;
+		 450)	echo arm	;;
+		 512)	echo ia64	;;
+		20530)	echo riscv32	;;
+		20580)	echo riscv64	;;
+		20776)	echo riscv128	;;
+		34404)	echo x64	;;
+		43620)	echo aa64	;;
+	esac
+}
+
+# Get the combined sizes in bytes of the files given, counting sparse
+# files as full length, and padding each file to cluster size
+cluster=16384
+filesizes() {
+	local t=0
+	local s
+	for s in $(ls -lnL "$@" 2>/dev/null | awk '/^-/{ print $5; }'); do
+		t=$((t + ((s+cluster-1)/cluster)*cluster))
+	done
+	echo $t
+}
+
+# Expand directory names which should be in /usr/share into a list
+# of possible alternatives
+sharedirs() {
+	local dir file
+	for dir in /usr/share /usr/lib64 /usr/lib; do
+		for file; do
+			echo "$dir/$file"
+			echo "$dir/${file^^}"
+		done
+	done
+}
+efidirs() {
+	local dir file
+	for dir in /usr/share /boot /usr/lib64 /usr/lib; do
+		for file; do
+			echo "$dir/$file"
+			echo "$dir/${file^^}"
+		done
+	done
+}
+
+findsyslinux() {
+	local f="$(find -L $(sharedirs syslinux isolinux) \
+		    -name "$1" -readable -type f -print -quit 2>/dev/null)"
+	if [ ! -f "$f" ]; then
+		die "Need a $1 file, please install syslinux/isolinux."
+	fi
+	echo "$f"
+	return 0
+}
+
+findovmf() {
+	local arch="$1"
+	shift
+	local -a names=(-false)
+	local name f
+	for name; do
+		names=("${names[@]}" -or -iname "$name")
+	done
+	for f in $(find -L $(efidirs edk2 ovmf) \
+			\( "${names[@]}" \) -readable -type f \
+			-print 2>/dev/null); do
+		if [ "$(efiarch "$f")" = "$arch" ]; then
+			echo "$f"
+			return 0
+		fi
+	done
+	die "Need a $1 file for $arch, please install EDK2/OVMF."
+}
+
+do_mcopy() {
+	if [ ${#FDINITRDS[@]} -gt 0 ]; then
+		mcopy "${FDINITRDS[@]}" "$1"
+	fi
+	if [ -n "$efishell" ]; then
+		mmd "$1"EFI "$1"EFI/Boot
+		mcopy "$efishell" "$1"EFI/Boot/boot${kefiarch}.efi
+	fi
+	if [ -n "$kefiarch" ]; then
+		echo linux "$KCMDLINE$initrdopts_efi" | \
+			mcopy - "$1"startup.nsh
+	fi
+	echo default linux "$KCMDLINE$initrdopts_syslinux" | \
+		mcopy - "$1"syslinux.cfg
+	mcopy "$FBZIMAGE" "$1"linux
+}
+
+genbzdisk() {
+	verify "$MTOOLSRC"
+	mformat -v 'LINUX_BOOT' a:
+	syslinux "$FIMAGE"
+	do_mcopy a:
+}
+
+genfdimage144() {
+	verify "$MTOOLSRC"
+	$dd if=/dev/zero of="$FIMAGE" bs=1024 count=1440 2>/dev/null
+	mformat -v 'LINUX_BOOT' v:
+	syslinux "$FIMAGE"
+	do_mcopy v:
+}
+
+genfdimage288() {
+	verify "$MTOOLSRC"
+	$dd if=/dev/zero of="$FIMAGE" bs=1024 count=2880 2>/dev/null
+	mformat -v 'LINUX_BOOT' w:
+	syslinux "$FIMAGE"
+	do_mcopy w:
+}
+
+genhdimage() {
+	verify "$MTOOLSRC"
+	mbr="$(findsyslinux mbr.bin)"
+	kefiarch="$(efiarch "$FBZIMAGE")"
+	if [ -n "$kefiarch" ]; then
+		# The efishell provides command line handling
+		efishell="$(findovmf $kefiarch shell.efi shell${kefiarch}.efi)"
+		ptype='-T 0xef'	# EFI system partition, no GPT
+	fi
+	sizes=$(filesizes "$FBZIMAGE" "${FDINITRDS[@]}" "$efishell")
+	# Allow 1% + 2 MiB for filesystem and partition table overhead,
+	# syslinux, and config files; this is probably excessive...
+	megs=$(((sizes + sizes/100 + 2*1024*1024 - 1)/(1024*1024)))
+	$dd if=/dev/zero of="$FIMAGE" bs=$((1024*1024)) count=$megs 2>/dev/null
+	mpartition -I -c -s 32 -h 64 $ptype -b 64 -a p:
+	$dd if="$mbr" of="$FIMAGE" bs=440 count=1 conv=notrunc 2>/dev/null
+	mformat -v 'LINUX_BOOT' -s 32 -h 64 -c $((cluster/512)) -t $megs h:
+	syslinux --offset $((64*512)) "$FIMAGE"
+	do_mcopy h:
+}
+
+geniso() {
+	tmp_dir="$(dirname "$FIMAGE")/isoimage"
+	rm -rf "$tmp_dir"
+	mkdir "$tmp_dir"
+	isolinux=$(findsyslinux isolinux.bin)
+	ldlinux=$(findsyslinux  ldlinux.c32)
+	cp "$isolinux" "$ldlinux" "$tmp_dir"
+	cp "$FBZIMAGE" "$tmp_dir"/linux
+	echo default linux "$KCMDLINE" > "$tmp_dir"/isolinux.cfg
+	cp "${FDINITRDS[@]}" "$tmp_dir"/
+	genisoimage -J -r -appid 'LINUX_BOOT' -input-charset=utf-8 \
+		    -quiet -o "$FIMAGE" -b isolinux.bin \
+		    -c boot.cat -no-emul-boot -boot-load-size 4 \
+		    -boot-info-table "$tmp_dir"
+	isohybrid "$FIMAGE" 2>/dev/null || true
+	rm -rf "$tmp_dir"
+}
+
+rm -f "$FIMAGE"
+
+case "$diskfmt" in
+	bzdisk)     genbzdisk;;
+	fdimage144) genfdimage144;;
+	fdimage288) genfdimage288;;
+	hdimage)    genhdimage;;
+	isoimage)   geniso;;
+	*)          die "Unknown image format: $diskfmt";;
+esac