Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 185 insertions, 0 deletions

diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c
new file mode 100644
index 000000000..c4ea5258a
--- /dev/null
+++ b/arch/x86/boot/main.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * Main module for the real-mode kernel code
+ */
+#include <linux/build_bug.h>
+
+#include "boot.h"
+#include "string.h"
+
+struct boot_params boot_params __attribute__((aligned(16)));
+
+struct port_io_ops pio_ops;
+
+char *HEAP = _end;
+char *heap_end = _end;		/* Default end of heap = no heap */
+
+/*
+ * Copy the header into the boot parameter block.  Since this
+ * screws up the old-style command line protocol, adjust by
+ * filling in the new-style command line pointer instead.
+ */
+
+static void copy_boot_params(void)
+{
+	struct old_cmdline {
+		u16 cl_magic;
+		u16 cl_offset;
+	};
+	const struct old_cmdline * const oldcmd =
+		absolute_pointer(OLD_CL_ADDRESS);
+
+	BUILD_BUG_ON(sizeof(boot_params) != 4096);
+	memcpy(&boot_params.hdr, &hdr, sizeof(hdr));
+
+	if (!boot_params.hdr.cmd_line_ptr &&
+	    oldcmd->cl_magic == OLD_CL_MAGIC) {
+		/* Old-style command line protocol. */
+		u16 cmdline_seg;
+
+		/* Figure out if the command line falls in the region
+		   of memory that an old kernel would have copied up
+		   to 0x90000... */
+		if (oldcmd->cl_offset < boot_params.hdr.setup_move_size)
+			cmdline_seg = ds();
+		else
+			cmdline_seg = 0x9000;
+
+		boot_params.hdr.cmd_line_ptr =
+			(cmdline_seg << 4) + oldcmd->cl_offset;
+	}
+}
+
+/*
+ * Query the keyboard lock status as given by the BIOS, and
+ * set the keyboard repeat rate to maximum.  Unclear why the latter
+ * is done here; this might be possible to kill off as stale code.
+ */
+static void keyboard_init(void)
+{
+	struct biosregs ireg, oreg;
+	initregs(&ireg);
+
+	ireg.ah = 0x02;		/* Get keyboard status */
+	intcall(0x16, &ireg, &oreg);
+	boot_params.kbd_status = oreg.al;
+
+	ireg.ax = 0x0305;	/* Set keyboard repeat rate */
+	intcall(0x16, &ireg, NULL);
+}
+
+/*
+ * Get Intel SpeedStep (IST) information.
+ */
+static void query_ist(void)
+{
+	struct biosregs ireg, oreg;
+
+	/* Some older BIOSes apparently crash on this call, so filter
+	   it from machines too old to have SpeedStep at all. */
+	if (cpu.level < 6)
+		return;
+
+	initregs(&ireg);
+	ireg.ax  = 0xe980;	 /* IST Support */
+	ireg.edx = 0x47534943;	 /* Request value */
+	intcall(0x15, &ireg, &oreg);
+
+	boot_params.ist_info.signature  = oreg.eax;
+	boot_params.ist_info.command    = oreg.ebx;
+	boot_params.ist_info.event      = oreg.ecx;
+	boot_params.ist_info.perf_level = oreg.edx;
+}
+
+/*
+ * Tell the BIOS what CPU mode we intend to run in.
+ */
+static void set_bios_mode(void)
+{
+#ifdef CONFIG_X86_64
+	struct biosregs ireg;
+
+	initregs(&ireg);
+	ireg.ax = 0xec00;
+	ireg.bx = 2;
+	intcall(0x15, &ireg, NULL);
+#endif
+}
+
+static void init_heap(void)
+{
+	char *stack_end;
+
+	if (boot_params.hdr.loadflags & CAN_USE_HEAP) {
+		asm("leal %P1(%%esp),%0"
+		    : "=r" (stack_end) : "i" (-STACK_SIZE));
+
+		heap_end = (char *)
+			((size_t)boot_params.hdr.heap_end_ptr + 0x200);
+		if (heap_end > stack_end)
+			heap_end = stack_end;
+	} else {
+		/* Boot protocol 2.00 only, no heap available */
+		puts("WARNING: Ancient bootloader, some functionality "
+		     "may be limited!\n");
+	}
+}
+
+void main(void)
+{
+	init_default_io_ops();
+
+	/* First, copy the boot header into the "zeropage" */
+	copy_boot_params();
+
+	/* Initialize the early-boot console */
+	console_init();
+	if (cmdline_find_option_bool("debug"))
+		puts("early console in setup code\n");
+
+	/* End of heap check */
+	init_heap();
+
+	/* Make sure we have all the proper CPU support */
+	if (validate_cpu()) {
+		puts("Unable to boot - please use a kernel appropriate "
+		     "for your CPU.\n");
+		die();
+	}
+
+	/* Tell the BIOS what CPU mode we intend to run in. */
+	set_bios_mode();
+
+	/* Detect memory layout */
+	detect_memory();
+
+	/* Set keyboard repeat rate (why?) and query the lock flags */
+	keyboard_init();
+
+	/* Query Intel SpeedStep (IST) information */
+	query_ist();
+
+	/* Query APM information */
+#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
+	query_apm_bios();
+#endif
+
+	/* Query EDD information */
+#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
+	query_edd();
+#endif
+
+	/* Set the video mode */
+	set_video();
+
+	/* Do the last things and invoke protected mode */
+	go_to_protected_mode();
+}