Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 817 insertions, 0 deletions

diff --git a/arch/x86/coco/tdx/tdx.c b/arch/x86/coco/tdx/tdx.c
new file mode 100644
index 000000000..3bd111d5e
--- /dev/null
+++ b/arch/x86/coco/tdx/tdx.c
@@ -0,0 +1,817 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2021-2022 Intel Corporation */
+
+#undef pr_fmt
+#define pr_fmt(fmt)     "tdx: " fmt
+
+#include <linux/cpufeature.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <asm/coco.h>
+#include <asm/tdx.h>
+#include <asm/vmx.h>
+#include <asm/insn.h>
+#include <asm/insn-eval.h>
+#include <asm/pgtable.h>
+
+/* TDX module Call Leaf IDs */
+#define TDX_GET_INFO			1
+#define TDX_GET_VEINFO			3
+#define TDX_GET_REPORT			4
+#define TDX_ACCEPT_PAGE			6
+
+/* TDX hypercall Leaf IDs */
+#define TDVMCALL_MAP_GPA		0x10001
+
+/* MMIO direction */
+#define EPT_READ	0
+#define EPT_WRITE	1
+
+/* Port I/O direction */
+#define PORT_READ	0
+#define PORT_WRITE	1
+
+/* See Exit Qualification for I/O Instructions in VMX documentation */
+#define VE_IS_IO_IN(e)		((e) & BIT(3))
+#define VE_GET_IO_SIZE(e)	(((e) & GENMASK(2, 0)) + 1)
+#define VE_GET_PORT_NUM(e)	((e) >> 16)
+#define VE_IS_IO_STRING(e)	((e) & BIT(4))
+
+#define ATTR_SEPT_VE_DISABLE	BIT(28)
+
+/* TDX Module call error codes */
+#define TDCALL_RETURN_CODE(a)	((a) >> 32)
+#define TDCALL_INVALID_OPERAND	0xc0000100
+
+#define TDREPORT_SUBTYPE_0	0
+
+/*
+ * Wrapper for standard use of __tdx_hypercall with no output aside from
+ * return code.
+ */
+static inline u64 _tdx_hypercall(u64 fn, u64 r12, u64 r13, u64 r14, u64 r15)
+{
+	struct tdx_hypercall_args args = {
+		.r10 = TDX_HYPERCALL_STANDARD,
+		.r11 = fn,
+		.r12 = r12,
+		.r13 = r13,
+		.r14 = r14,
+		.r15 = r15,
+	};
+
+	return __tdx_hypercall(&args, 0);
+}
+
+/* Called from __tdx_hypercall() for unrecoverable failure */
+noinstr void __tdx_hypercall_failed(void)
+{
+	instrumentation_begin();
+	panic("TDVMCALL failed. TDX module bug?");
+}
+
+/*
+ * The TDG.VP.VMCALL-Instruction-execution sub-functions are defined
+ * independently from but are currently matched 1:1 with VMX EXIT_REASONs.
+ * Reusing the KVM EXIT_REASON macros makes it easier to connect the host and
+ * guest sides of these calls.
+ */
+static __always_inline u64 hcall_func(u64 exit_reason)
+{
+	return exit_reason;
+}
+
+#ifdef CONFIG_KVM_GUEST
+long tdx_kvm_hypercall(unsigned int nr, unsigned long p1, unsigned long p2,
+		       unsigned long p3, unsigned long p4)
+{
+	struct tdx_hypercall_args args = {
+		.r10 = nr,
+		.r11 = p1,
+		.r12 = p2,
+		.r13 = p3,
+		.r14 = p4,
+	};
+
+	return __tdx_hypercall(&args, 0);
+}
+EXPORT_SYMBOL_GPL(tdx_kvm_hypercall);
+#endif
+
+/*
+ * Used for TDX guests to make calls directly to the TD module.  This
+ * should only be used for calls that have no legitimate reason to fail
+ * or where the kernel can not survive the call failing.
+ */
+static inline void tdx_module_call(u64 fn, u64 rcx, u64 rdx, u64 r8, u64 r9,
+				   struct tdx_module_output *out)
+{
+	if (__tdx_module_call(fn, rcx, rdx, r8, r9, out))
+		panic("TDCALL %lld failed (Buggy TDX module!)\n", fn);
+}
+
+/**
+ * tdx_mcall_get_report0() - Wrapper to get TDREPORT0 (a.k.a. TDREPORT
+ *                           subtype 0) using TDG.MR.REPORT TDCALL.
+ * @reportdata: Address of the input buffer which contains user-defined
+ *              REPORTDATA to be included into TDREPORT.
+ * @tdreport: Address of the output buffer to store TDREPORT.
+ *
+ * Refer to section titled "TDG.MR.REPORT leaf" in the TDX Module
+ * v1.0 specification for more information on TDG.MR.REPORT TDCALL.
+ * It is used in the TDX guest driver module to get the TDREPORT0.
+ *
+ * Return 0 on success, -EINVAL for invalid operands, or -EIO on
+ * other TDCALL failures.
+ */
+int tdx_mcall_get_report0(u8 *reportdata, u8 *tdreport)
+{
+	u64 ret;
+
+	ret = __tdx_module_call(TDX_GET_REPORT, virt_to_phys(tdreport),
+				virt_to_phys(reportdata), TDREPORT_SUBTYPE_0,
+				0, NULL);
+	if (ret) {
+		if (TDCALL_RETURN_CODE(ret) == TDCALL_INVALID_OPERAND)
+			return -EINVAL;
+		return -EIO;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(tdx_mcall_get_report0);
+
+static void tdx_parse_tdinfo(u64 *cc_mask)
+{
+	struct tdx_module_output out;
+	unsigned int gpa_width;
+	u64 td_attr;
+
+	/*
+	 * TDINFO TDX module call is used to get the TD execution environment
+	 * information like GPA width, number of available vcpus, debug mode
+	 * information, etc. More details about the ABI can be found in TDX
+	 * Guest-Host-Communication Interface (GHCI), section 2.4.2 TDCALL
+	 * [TDG.VP.INFO].
+	 */
+	tdx_module_call(TDX_GET_INFO, 0, 0, 0, 0, &out);
+
+	/*
+	 * The highest bit of a guest physical address is the "sharing" bit.
+	 * Set it for shared pages and clear it for private pages.
+	 *
+	 * The GPA width that comes out of this call is critical. TDX guests
+	 * can not meaningfully run without it.
+	 */
+	gpa_width = out.rcx & GENMASK(5, 0);
+	*cc_mask = BIT_ULL(gpa_width - 1);
+
+	/*
+	 * The kernel can not handle #VE's when accessing normal kernel
+	 * memory.  Ensure that no #VE will be delivered for accesses to
+	 * TD-private memory.  Only VMM-shared memory (MMIO) will #VE.
+	 */
+	td_attr = out.rdx;
+	if (!(td_attr & ATTR_SEPT_VE_DISABLE))
+		panic("TD misconfiguration: SEPT_VE_DISABLE attibute must be set.\n");
+}
+
+/*
+ * The TDX module spec states that #VE may be injected for a limited set of
+ * reasons:
+ *
+ *  - Emulation of the architectural #VE injection on EPT violation;
+ *
+ *  - As a result of guest TD execution of a disallowed instruction,
+ *    a disallowed MSR access, or CPUID virtualization;
+ *
+ *  - A notification to the guest TD about anomalous behavior;
+ *
+ * The last one is opt-in and is not used by the kernel.
+ *
+ * The Intel Software Developer's Manual describes cases when instruction
+ * length field can be used in section "Information for VM Exits Due to
+ * Instruction Execution".
+ *
+ * For TDX, it ultimately means GET_VEINFO provides reliable instruction length
+ * information if #VE occurred due to instruction execution, but not for EPT
+ * violations.
+ */
+static int ve_instr_len(struct ve_info *ve)
+{
+	switch (ve->exit_reason) {
+	case EXIT_REASON_HLT:
+	case EXIT_REASON_MSR_READ:
+	case EXIT_REASON_MSR_WRITE:
+	case EXIT_REASON_CPUID:
+	case EXIT_REASON_IO_INSTRUCTION:
+		/* It is safe to use ve->instr_len for #VE due instructions */
+		return ve->instr_len;
+	case EXIT_REASON_EPT_VIOLATION:
+		/*
+		 * For EPT violations, ve->insn_len is not defined. For those,
+		 * the kernel must decode instructions manually and should not
+		 * be using this function.
+		 */
+		WARN_ONCE(1, "ve->instr_len is not defined for EPT violations");
+		return 0;
+	default:
+		WARN_ONCE(1, "Unexpected #VE-type: %lld\n", ve->exit_reason);
+		return ve->instr_len;
+	}
+}
+
+static u64 __cpuidle __halt(const bool irq_disabled)
+{
+	struct tdx_hypercall_args args = {
+		.r10 = TDX_HYPERCALL_STANDARD,
+		.r11 = hcall_func(EXIT_REASON_HLT),
+		.r12 = irq_disabled,
+	};
+
+	/*
+	 * Emulate HLT operation via hypercall. More info about ABI
+	 * can be found in TDX Guest-Host-Communication Interface
+	 * (GHCI), section 3.8 TDG.VP.VMCALL<Instruction.HLT>.
+	 *
+	 * The VMM uses the "IRQ disabled" param to understand IRQ
+	 * enabled status (RFLAGS.IF) of the TD guest and to determine
+	 * whether or not it should schedule the halted vCPU if an
+	 * IRQ becomes pending. E.g. if IRQs are disabled, the VMM
+	 * can keep the vCPU in virtual HLT, even if an IRQ is
+	 * pending, without hanging/breaking the guest.
+	 */
+	return __tdx_hypercall(&args, 0);
+}
+
+static int handle_halt(struct ve_info *ve)
+{
+	const bool irq_disabled = irqs_disabled();
+
+	if (__halt(irq_disabled))
+		return -EIO;
+
+	return ve_instr_len(ve);
+}
+
+void __cpuidle tdx_safe_halt(void)
+{
+	const bool irq_disabled = false;
+
+	/*
+	 * Use WARN_ONCE() to report the failure.
+	 */
+	if (__halt(irq_disabled))
+		WARN_ONCE(1, "HLT instruction emulation failed\n");
+}
+
+static int read_msr(struct pt_regs *regs, struct ve_info *ve)
+{
+	struct tdx_hypercall_args args = {
+		.r10 = TDX_HYPERCALL_STANDARD,
+		.r11 = hcall_func(EXIT_REASON_MSR_READ),
+		.r12 = regs->cx,
+	};
+
+	/*
+	 * Emulate the MSR read via hypercall. More info about ABI
+	 * can be found in TDX Guest-Host-Communication Interface
+	 * (GHCI), section titled "TDG.VP.VMCALL<Instruction.RDMSR>".
+	 */
+	if (__tdx_hypercall(&args, TDX_HCALL_HAS_OUTPUT))
+		return -EIO;
+
+	regs->ax = lower_32_bits(args.r11);
+	regs->dx = upper_32_bits(args.r11);
+	return ve_instr_len(ve);
+}
+
+static int write_msr(struct pt_regs *regs, struct ve_info *ve)
+{
+	struct tdx_hypercall_args args = {
+		.r10 = TDX_HYPERCALL_STANDARD,
+		.r11 = hcall_func(EXIT_REASON_MSR_WRITE),
+		.r12 = regs->cx,
+		.r13 = (u64)regs->dx << 32 | regs->ax,
+	};
+
+	/*
+	 * Emulate the MSR write via hypercall. More info about ABI
+	 * can be found in TDX Guest-Host-Communication Interface
+	 * (GHCI) section titled "TDG.VP.VMCALL<Instruction.WRMSR>".
+	 */
+	if (__tdx_hypercall(&args, 0))
+		return -EIO;
+
+	return ve_instr_len(ve);
+}
+
+static int handle_cpuid(struct pt_regs *regs, struct ve_info *ve)
+{
+	struct tdx_hypercall_args args = {
+		.r10 = TDX_HYPERCALL_STANDARD,
+		.r11 = hcall_func(EXIT_REASON_CPUID),
+		.r12 = regs->ax,
+		.r13 = regs->cx,
+	};
+
+	/*
+	 * Only allow VMM to control range reserved for hypervisor
+	 * communication.
+	 *
+	 * Return all-zeros for any CPUID outside the range. It matches CPU
+	 * behaviour for non-supported leaf.
+	 */
+	if (regs->ax < 0x40000000 || regs->ax > 0x4FFFFFFF) {
+		regs->ax = regs->bx = regs->cx = regs->dx = 0;
+		return ve_instr_len(ve);
+	}
+
+	/*
+	 * Emulate the CPUID instruction via a hypercall. More info about
+	 * ABI can be found in TDX Guest-Host-Communication Interface
+	 * (GHCI), section titled "VP.VMCALL<Instruction.CPUID>".
+	 */
+	if (__tdx_hypercall(&args, TDX_HCALL_HAS_OUTPUT))
+		return -EIO;
+
+	/*
+	 * As per TDX GHCI CPUID ABI, r12-r15 registers contain contents of
+	 * EAX, EBX, ECX, EDX registers after the CPUID instruction execution.
+	 * So copy the register contents back to pt_regs.
+	 */
+	regs->ax = args.r12;
+	regs->bx = args.r13;
+	regs->cx = args.r14;
+	regs->dx = args.r15;
+
+	return ve_instr_len(ve);
+}
+
+static bool mmio_read(int size, unsigned long addr, unsigned long *val)
+{
+	struct tdx_hypercall_args args = {
+		.r10 = TDX_HYPERCALL_STANDARD,
+		.r11 = hcall_func(EXIT_REASON_EPT_VIOLATION),
+		.r12 = size,
+		.r13 = EPT_READ,
+		.r14 = addr,
+		.r15 = *val,
+	};
+
+	if (__tdx_hypercall(&args, TDX_HCALL_HAS_OUTPUT))
+		return false;
+	*val = args.r11;
+	return true;
+}
+
+static bool mmio_write(int size, unsigned long addr, unsigned long val)
+{
+	return !_tdx_hypercall(hcall_func(EXIT_REASON_EPT_VIOLATION), size,
+			       EPT_WRITE, addr, val);
+}
+
+static int handle_mmio(struct pt_regs *regs, struct ve_info *ve)
+{
+	unsigned long *reg, val, vaddr;
+	char buffer[MAX_INSN_SIZE];
+	enum insn_mmio_type mmio;
+	struct insn insn = {};
+	int size, extend_size;
+	u8 extend_val = 0;
+
+	/* Only in-kernel MMIO is supported */
+	if (WARN_ON_ONCE(user_mode(regs)))
+		return -EFAULT;
+
+	if (copy_from_kernel_nofault(buffer, (void *)regs->ip, MAX_INSN_SIZE))
+		return -EFAULT;
+
+	if (insn_decode(&insn, buffer, MAX_INSN_SIZE, INSN_MODE_64))
+		return -EINVAL;
+
+	mmio = insn_decode_mmio(&insn, &size);
+	if (WARN_ON_ONCE(mmio == INSN_MMIO_DECODE_FAILED))
+		return -EINVAL;
+
+	if (mmio != INSN_MMIO_WRITE_IMM && mmio != INSN_MMIO_MOVS) {
+		reg = insn_get_modrm_reg_ptr(&insn, regs);
+		if (!reg)
+			return -EINVAL;
+	}
+
+	/*
+	 * Reject EPT violation #VEs that split pages.
+	 *
+	 * MMIO accesses are supposed to be naturally aligned and therefore
+	 * never cross page boundaries. Seeing split page accesses indicates
+	 * a bug or a load_unaligned_zeropad() that stepped into an MMIO page.
+	 *
+	 * load_unaligned_zeropad() will recover using exception fixups.
+	 */
+	vaddr = (unsigned long)insn_get_addr_ref(&insn, regs);
+	if (vaddr / PAGE_SIZE != (vaddr + size - 1) / PAGE_SIZE)
+		return -EFAULT;
+
+	/* Handle writes first */
+	switch (mmio) {
+	case INSN_MMIO_WRITE:
+		memcpy(&val, reg, size);
+		if (!mmio_write(size, ve->gpa, val))
+			return -EIO;
+		return insn.length;
+	case INSN_MMIO_WRITE_IMM:
+		val = insn.immediate.value;
+		if (!mmio_write(size, ve->gpa, val))
+			return -EIO;
+		return insn.length;
+	case INSN_MMIO_READ:
+	case INSN_MMIO_READ_ZERO_EXTEND:
+	case INSN_MMIO_READ_SIGN_EXTEND:
+		/* Reads are handled below */
+		break;
+	case INSN_MMIO_MOVS:
+	case INSN_MMIO_DECODE_FAILED:
+		/*
+		 * MMIO was accessed with an instruction that could not be
+		 * decoded or handled properly. It was likely not using io.h
+		 * helpers or accessed MMIO accidentally.
+		 */
+		return -EINVAL;
+	default:
+		WARN_ONCE(1, "Unknown insn_decode_mmio() decode value?");
+		return -EINVAL;
+	}
+
+	/* Handle reads */
+	if (!mmio_read(size, ve->gpa, &val))
+		return -EIO;
+
+	switch (mmio) {
+	case INSN_MMIO_READ:
+		/* Zero-extend for 32-bit operation */
+		extend_size = size == 4 ? sizeof(*reg) : 0;
+		break;
+	case INSN_MMIO_READ_ZERO_EXTEND:
+		/* Zero extend based on operand size */
+		extend_size = insn.opnd_bytes;
+		break;
+	case INSN_MMIO_READ_SIGN_EXTEND:
+		/* Sign extend based on operand size */
+		extend_size = insn.opnd_bytes;
+		if (size == 1 && val & BIT(7))
+			extend_val = 0xFF;
+		else if (size > 1 && val & BIT(15))
+			extend_val = 0xFF;
+		break;
+	default:
+		/* All other cases has to be covered with the first switch() */
+		WARN_ON_ONCE(1);
+		return -EINVAL;
+	}
+
+	if (extend_size)
+		memset(reg, extend_val, extend_size);
+	memcpy(reg, &val, size);
+	return insn.length;
+}
+
+static bool handle_in(struct pt_regs *regs, int size, int port)
+{
+	struct tdx_hypercall_args args = {
+		.r10 = TDX_HYPERCALL_STANDARD,
+		.r11 = hcall_func(EXIT_REASON_IO_INSTRUCTION),
+		.r12 = size,
+		.r13 = PORT_READ,
+		.r14 = port,
+	};
+	u64 mask = GENMASK(BITS_PER_BYTE * size, 0);
+	bool success;
+
+	/*
+	 * Emulate the I/O read via hypercall. More info about ABI can be found
+	 * in TDX Guest-Host-Communication Interface (GHCI) section titled
+	 * "TDG.VP.VMCALL<Instruction.IO>".
+	 */
+	success = !__tdx_hypercall(&args, TDX_HCALL_HAS_OUTPUT);
+
+	/* Update part of the register affected by the emulated instruction */
+	regs->ax &= ~mask;
+	if (success)
+		regs->ax |= args.r11 & mask;
+
+	return success;
+}
+
+static bool handle_out(struct pt_regs *regs, int size, int port)
+{
+	u64 mask = GENMASK(BITS_PER_BYTE * size, 0);
+
+	/*
+	 * Emulate the I/O write via hypercall. More info about ABI can be found
+	 * in TDX Guest-Host-Communication Interface (GHCI) section titled
+	 * "TDG.VP.VMCALL<Instruction.IO>".
+	 */
+	return !_tdx_hypercall(hcall_func(EXIT_REASON_IO_INSTRUCTION), size,
+			       PORT_WRITE, port, regs->ax & mask);
+}
+
+/*
+ * Emulate I/O using hypercall.
+ *
+ * Assumes the IO instruction was using ax, which is enforced
+ * by the standard io.h macros.
+ *
+ * Return True on success or False on failure.
+ */
+static int handle_io(struct pt_regs *regs, struct ve_info *ve)
+{
+	u32 exit_qual = ve->exit_qual;
+	int size, port;
+	bool in, ret;
+
+	if (VE_IS_IO_STRING(exit_qual))
+		return -EIO;
+
+	in   = VE_IS_IO_IN(exit_qual);
+	size = VE_GET_IO_SIZE(exit_qual);
+	port = VE_GET_PORT_NUM(exit_qual);
+
+
+	if (in)
+		ret = handle_in(regs, size, port);
+	else
+		ret = handle_out(regs, size, port);
+	if (!ret)
+		return -EIO;
+
+	return ve_instr_len(ve);
+}
+
+/*
+ * Early #VE exception handler. Only handles a subset of port I/O.
+ * Intended only for earlyprintk. If failed, return false.
+ */
+__init bool tdx_early_handle_ve(struct pt_regs *regs)
+{
+	struct ve_info ve;
+	int insn_len;
+
+	tdx_get_ve_info(&ve);
+
+	if (ve.exit_reason != EXIT_REASON_IO_INSTRUCTION)
+		return false;
+
+	insn_len = handle_io(regs, &ve);
+	if (insn_len < 0)
+		return false;
+
+	regs->ip += insn_len;
+	return true;
+}
+
+void tdx_get_ve_info(struct ve_info *ve)
+{
+	struct tdx_module_output out;
+
+	/*
+	 * Called during #VE handling to retrieve the #VE info from the
+	 * TDX module.
+	 *
+	 * This has to be called early in #VE handling.  A "nested" #VE which
+	 * occurs before this will raise a #DF and is not recoverable.
+	 *
+	 * The call retrieves the #VE info from the TDX module, which also
+	 * clears the "#VE valid" flag. This must be done before anything else
+	 * because any #VE that occurs while the valid flag is set will lead to
+	 * #DF.
+	 *
+	 * Note, the TDX module treats virtual NMIs as inhibited if the #VE
+	 * valid flag is set. It means that NMI=>#VE will not result in a #DF.
+	 */
+	tdx_module_call(TDX_GET_VEINFO, 0, 0, 0, 0, &out);
+
+	/* Transfer the output parameters */
+	ve->exit_reason = out.rcx;
+	ve->exit_qual   = out.rdx;
+	ve->gla         = out.r8;
+	ve->gpa         = out.r9;
+	ve->instr_len   = lower_32_bits(out.r10);
+	ve->instr_info  = upper_32_bits(out.r10);
+}
+
+/*
+ * Handle the user initiated #VE.
+ *
+ * On success, returns the number of bytes RIP should be incremented (>=0)
+ * or -errno on error.
+ */
+static int virt_exception_user(struct pt_regs *regs, struct ve_info *ve)
+{
+	switch (ve->exit_reason) {
+	case EXIT_REASON_CPUID:
+		return handle_cpuid(regs, ve);
+	default:
+		pr_warn("Unexpected #VE: %lld\n", ve->exit_reason);
+		return -EIO;
+	}
+}
+
+/*
+ * Handle the kernel #VE.
+ *
+ * On success, returns the number of bytes RIP should be incremented (>=0)
+ * or -errno on error.
+ */
+static int virt_exception_kernel(struct pt_regs *regs, struct ve_info *ve)
+{
+	switch (ve->exit_reason) {
+	case EXIT_REASON_HLT:
+		return handle_halt(ve);
+	case EXIT_REASON_MSR_READ:
+		return read_msr(regs, ve);
+	case EXIT_REASON_MSR_WRITE:
+		return write_msr(regs, ve);
+	case EXIT_REASON_CPUID:
+		return handle_cpuid(regs, ve);
+	case EXIT_REASON_EPT_VIOLATION:
+		return handle_mmio(regs, ve);
+	case EXIT_REASON_IO_INSTRUCTION:
+		return handle_io(regs, ve);
+	default:
+		pr_warn("Unexpected #VE: %lld\n", ve->exit_reason);
+		return -EIO;
+	}
+}
+
+bool tdx_handle_virt_exception(struct pt_regs *regs, struct ve_info *ve)
+{
+	int insn_len;
+
+	if (user_mode(regs))
+		insn_len = virt_exception_user(regs, ve);
+	else
+		insn_len = virt_exception_kernel(regs, ve);
+	if (insn_len < 0)
+		return false;
+
+	/* After successful #VE handling, move the IP */
+	regs->ip += insn_len;
+
+	return true;
+}
+
+static bool tdx_tlb_flush_required(bool private)
+{
+	/*
+	 * TDX guest is responsible for flushing TLB on private->shared
+	 * transition. VMM is responsible for flushing on shared->private.
+	 *
+	 * The VMM _can't_ flush private addresses as it can't generate PAs
+	 * with the guest's HKID.  Shared memory isn't subject to integrity
+	 * checking, i.e. the VMM doesn't need to flush for its own protection.
+	 *
+	 * There's no need to flush when converting from shared to private,
+	 * as flushing is the VMM's responsibility in this case, e.g. it must
+	 * flush to avoid integrity failures in the face of a buggy or
+	 * malicious guest.
+	 */
+	return !private;
+}
+
+static bool tdx_cache_flush_required(void)
+{
+	/*
+	 * AMD SME/SEV can avoid cache flushing if HW enforces cache coherence.
+	 * TDX doesn't have such capability.
+	 *
+	 * Flush cache unconditionally.
+	 */
+	return true;
+}
+
+static bool try_accept_one(phys_addr_t *start, unsigned long len,
+			  enum pg_level pg_level)
+{
+	unsigned long accept_size = page_level_size(pg_level);
+	u64 tdcall_rcx;
+	u8 page_size;
+
+	if (!IS_ALIGNED(*start, accept_size))
+		return false;
+
+	if (len < accept_size)
+		return false;
+
+	/*
+	 * Pass the page physical address to the TDX module to accept the
+	 * pending, private page.
+	 *
+	 * Bits 2:0 of RCX encode page size: 0 - 4K, 1 - 2M, 2 - 1G.
+	 */
+	switch (pg_level) {
+	case PG_LEVEL_4K:
+		page_size = 0;
+		break;
+	case PG_LEVEL_2M:
+		page_size = 1;
+		break;
+	case PG_LEVEL_1G:
+		page_size = 2;
+		break;
+	default:
+		return false;
+	}
+
+	tdcall_rcx = *start | page_size;
+	if (__tdx_module_call(TDX_ACCEPT_PAGE, tdcall_rcx, 0, 0, 0, NULL))
+		return false;
+
+	*start += accept_size;
+	return true;
+}
+
+/*
+ * Inform the VMM of the guest's intent for this physical page: shared with
+ * the VMM or private to the guest.  The VMM is expected to change its mapping
+ * of the page in response.
+ */
+static bool tdx_enc_status_changed(unsigned long vaddr, int numpages, bool enc)
+{
+	phys_addr_t start = __pa(vaddr);
+	phys_addr_t end   = __pa(vaddr + numpages * PAGE_SIZE);
+
+	if (!enc) {
+		/* Set the shared (decrypted) bits: */
+		start |= cc_mkdec(0);
+		end   |= cc_mkdec(0);
+	}
+
+	/*
+	 * Notify the VMM about page mapping conversion. More info about ABI
+	 * can be found in TDX Guest-Host-Communication Interface (GHCI),
+	 * section "TDG.VP.VMCALL<MapGPA>"
+	 */
+	if (_tdx_hypercall(TDVMCALL_MAP_GPA, start, end - start, 0, 0))
+		return false;
+
+	/* private->shared conversion  requires only MapGPA call */
+	if (!enc)
+		return true;
+
+	/*
+	 * For shared->private conversion, accept the page using
+	 * TDX_ACCEPT_PAGE TDX module call.
+	 */
+	while (start < end) {
+		unsigned long len = end - start;
+
+		/*
+		 * Try larger accepts first. It gives chance to VMM to keep
+		 * 1G/2M SEPT entries where possible and speeds up process by
+		 * cutting number of hypercalls (if successful).
+		 */
+
+		if (try_accept_one(&start, len, PG_LEVEL_1G))
+			continue;
+
+		if (try_accept_one(&start, len, PG_LEVEL_2M))
+			continue;
+
+		if (!try_accept_one(&start, len, PG_LEVEL_4K))
+			return false;
+	}
+
+	return true;
+}
+
+void __init tdx_early_init(void)
+{
+	u64 cc_mask;
+	u32 eax, sig[3];
+
+	cpuid_count(TDX_CPUID_LEAF_ID, 0, &eax, &sig[0], &sig[2],  &sig[1]);
+
+	if (memcmp(TDX_IDENT, sig, sizeof(sig)))
+		return;
+
+	setup_force_cpu_cap(X86_FEATURE_TDX_GUEST);
+
+	cc_set_vendor(CC_VENDOR_INTEL);
+	tdx_parse_tdinfo(&cc_mask);
+	cc_set_mask(cc_mask);
+
+	/*
+	 * All bits above GPA width are reserved and kernel treats shared bit
+	 * as flag, not as part of physical address.
+	 *
+	 * Adjust physical mask to only cover valid GPA bits.
+	 */
+	physical_mask &= cc_mask - 1;
+
+	x86_platform.guest.enc_cache_flush_required = tdx_cache_flush_required;
+	x86_platform.guest.enc_tlb_flush_required   = tdx_tlb_flush_required;
+	x86_platform.guest.enc_status_change_finish = tdx_enc_status_changed;
+
+	pr_info("Guest detected\n");
+}