Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 256 insertions, 0 deletions

diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
new file mode 100644
index 000000000..70533fdcb
--- /dev/null
+++ b/arch/x86/include/asm/pci_x86.h
@@ -0,0 +1,256 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *	Low-Level PCI Access for i386 machines.
+ *
+ *	(c) 1999 Martin Mares <mj@ucw.cz>
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/spinlock.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, ...) printk(fmt, ##__VA_ARGS__)
+#else
+#define DBG(fmt, ...)				\
+do {						\
+	if (0)					\
+		printk(fmt, ##__VA_ARGS__);	\
+} while (0)
+#endif
+
+#define PCI_PROBE_BIOS		0x0001
+#define PCI_PROBE_CONF1		0x0002
+#define PCI_PROBE_CONF2		0x0004
+#define PCI_PROBE_MMCONF	0x0008
+#define PCI_PROBE_MASK		0x000f
+#define PCI_PROBE_NOEARLY	0x0010
+
+#define PCI_NO_CHECKS		0x0400
+#define PCI_USE_PIRQ_MASK	0x0800
+#define PCI_ASSIGN_ROMS		0x1000
+#define PCI_BIOS_IRQ_SCAN	0x2000
+#define PCI_ASSIGN_ALL_BUSSES	0x4000
+#define PCI_CAN_SKIP_ISA_ALIGN	0x8000
+#define PCI_USE__CRS		0x10000
+#define PCI_CHECK_ENABLE_AMD_MMCONF	0x20000
+#define PCI_HAS_IO_ECS		0x40000
+#define PCI_NOASSIGN_ROMS	0x80000
+#define PCI_ROOT_NO_CRS		0x100000
+#define PCI_NOASSIGN_BARS	0x200000
+#define PCI_BIG_ROOT_WINDOW	0x400000
+#define PCI_USE_E820		0x800000
+#define PCI_NO_E820		0x1000000
+
+extern unsigned int pci_probe;
+extern unsigned long pirq_table_addr;
+
+enum pci_bf_sort_state {
+	pci_bf_sort_default,
+	pci_force_nobf,
+	pci_force_bf,
+	pci_dmi_bf,
+};
+
+/* pci-i386.c */
+
+void pcibios_resource_survey(void);
+void pcibios_set_cache_line_size(void);
+
+/* pci-pc.c */
+
+extern int pcibios_last_bus;
+extern struct pci_ops pci_root_ops;
+
+void pcibios_scan_specific_bus(int busn);
+
+/* pci-irq.c */
+
+struct pci_dev;
+
+struct irq_info {
+	u8 bus, devfn;			/* Bus, device and function */
+	struct {
+		u8 link;		/* IRQ line ID, chipset dependent,
+					   0 = not routed */
+		u16 bitmap;		/* Available IRQs */
+	} __attribute__((packed)) irq[4];
+	u8 slot;			/* Slot number, 0=onboard */
+	u8 rfu;
+} __attribute__((packed));
+
+struct irq_routing_table {
+	u32 signature;			/* PIRQ_SIGNATURE should be here */
+	u16 version;			/* PIRQ_VERSION */
+	u16 size;			/* Table size in bytes */
+	u8 rtr_bus, rtr_devfn;		/* Where the interrupt router lies */
+	u16 exclusive_irqs;		/* IRQs devoted exclusively to
+					   PCI usage */
+	u16 rtr_vendor, rtr_device;	/* Vendor and device ID of
+					   interrupt router */
+	u32 miniport_data;		/* Crap */
+	u8 rfu[11];
+	u8 checksum;			/* Modulo 256 checksum must give 0 */
+	struct irq_info slots[];
+} __attribute__((packed));
+
+struct irt_routing_table {
+	u32 signature;			/* IRT_SIGNATURE should be here */
+	u8 size;			/* Number of entries provided */
+	u8 used;			/* Number of entries actually used */
+	u16 exclusive_irqs;		/* IRQs devoted exclusively to
+					   PCI usage */
+	struct irq_info slots[];
+} __attribute__((packed));
+
+extern unsigned int pcibios_irq_mask;
+
+extern raw_spinlock_t pci_config_lock;
+
+extern int (*pcibios_enable_irq)(struct pci_dev *dev);
+extern void (*pcibios_disable_irq)(struct pci_dev *dev);
+
+extern bool mp_should_keep_irq(struct device *dev);
+
+struct pci_raw_ops {
+	int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
+						int reg, int len, u32 *val);
+	int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn,
+						int reg, int len, u32 val);
+};
+
+extern const struct pci_raw_ops *raw_pci_ops;
+extern const struct pci_raw_ops *raw_pci_ext_ops;
+
+extern const struct pci_raw_ops pci_mmcfg;
+extern const struct pci_raw_ops pci_direct_conf1;
+extern bool port_cf9_safe;
+
+/* arch_initcall level */
+#ifdef CONFIG_PCI_DIRECT
+extern int pci_direct_probe(void);
+extern void pci_direct_init(int type);
+#else
+static inline int pci_direct_probe(void) { return -1; }
+static inline  void pci_direct_init(int type) { }
+#endif
+
+#ifdef CONFIG_PCI_BIOS
+extern void pci_pcbios_init(void);
+#else
+static inline void pci_pcbios_init(void) { }
+#endif
+
+extern void __init dmi_check_pciprobe(void);
+extern void __init dmi_check_skip_isa_align(void);
+
+/* some common used subsys_initcalls */
+#ifdef CONFIG_PCI
+extern int __init pci_acpi_init(void);
+#else
+static inline int  __init pci_acpi_init(void)
+{
+	return -EINVAL;
+}
+#endif
+extern void __init pcibios_irq_init(void);
+extern int __init pcibios_init(void);
+extern int pci_legacy_init(void);
+extern void pcibios_fixup_irqs(void);
+
+/* pci-mmconfig.c */
+
+/* "PCI MMCONFIG %04x [bus %02x-%02x]" */
+#define PCI_MMCFG_RESOURCE_NAME_LEN (22 + 4 + 2 + 2)
+
+struct pci_mmcfg_region {
+	struct list_head list;
+	struct resource res;
+	u64 address;
+	char __iomem *virt;
+	u16 segment;
+	u8 start_bus;
+	u8 end_bus;
+	char name[PCI_MMCFG_RESOURCE_NAME_LEN];
+};
+
+extern int __init pci_mmcfg_arch_init(void);
+extern void __init pci_mmcfg_arch_free(void);
+extern int pci_mmcfg_arch_map(struct pci_mmcfg_region *cfg);
+extern void pci_mmcfg_arch_unmap(struct pci_mmcfg_region *cfg);
+extern int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end,
+			       phys_addr_t addr);
+extern int pci_mmconfig_delete(u16 seg, u8 start, u8 end);
+extern struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus);
+extern struct pci_mmcfg_region *__init pci_mmconfig_add(int segment, int start,
+							int end, u64 addr);
+
+extern struct list_head pci_mmcfg_list;
+
+#define PCI_MMCFG_BUS_OFFSET(bus)      ((bus) << 20)
+
+/*
+ * On AMD Fam10h CPUs, all PCI MMIO configuration space accesses must use
+ * %eax.  No other source or target registers may be used.  The following
+ * mmio_config_* accessors enforce this.  See "BIOS and Kernel Developer's
+ * Guide (BKDG) For AMD Family 10h Processors", rev. 3.48, sec 2.11.1,
+ * "MMIO Configuration Coding Requirements".
+ */
+static inline unsigned char mmio_config_readb(void __iomem *pos)
+{
+	u8 val;
+	asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos));
+	return val;
+}
+
+static inline unsigned short mmio_config_readw(void __iomem *pos)
+{
+	u16 val;
+	asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos));
+	return val;
+}
+
+static inline unsigned int mmio_config_readl(void __iomem *pos)
+{
+	u32 val;
+	asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos));
+	return val;
+}
+
+static inline void mmio_config_writeb(void __iomem *pos, u8 val)
+{
+	asm volatile("movb %%al,(%1)" : : "a" (val), "r" (pos) : "memory");
+}
+
+static inline void mmio_config_writew(void __iomem *pos, u16 val)
+{
+	asm volatile("movw %%ax,(%1)" : : "a" (val), "r" (pos) : "memory");
+}
+
+static inline void mmio_config_writel(void __iomem *pos, u32 val)
+{
+	asm volatile("movl %%eax,(%1)" : : "a" (val), "r" (pos) : "memory");
+}
+
+#ifdef CONFIG_PCI
+# ifdef CONFIG_ACPI
+#  define x86_default_pci_init		pci_acpi_init
+# else
+#  define x86_default_pci_init		pci_legacy_init
+# endif
+# define x86_default_pci_init_irq	pcibios_irq_init
+# define x86_default_pci_fixup_irqs	pcibios_fixup_irqs
+#else
+# define x86_default_pci_init		NULL
+# define x86_default_pci_init_irq	NULL
+# define x86_default_pci_fixup_irqs	NULL
+#endif
+
+#if defined(CONFIG_PCI) && defined(CONFIG_ACPI)
+extern bool pci_use_e820;
+#else
+#define pci_use_e820 false
+#endif