Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 675 insertions, 0 deletions

diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
new file mode 100644
index 000000000..222efd4a0
--- /dev/null
+++ b/arch/x86/kernel/head_64.S
@@ -0,0 +1,675 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  linux/arch/x86/kernel/head_64.S -- start in 32bit and switch to 64bit
+ *
+ *  Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
+ *  Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
+ *  Copyright (C) 2000 Karsten Keil <kkeil@suse.de>
+ *  Copyright (C) 2001,2002 Andi Kleen <ak@suse.de>
+ *  Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com>
+ */
+
+
+#include <linux/linkage.h>
+#include <linux/threads.h>
+#include <linux/init.h>
+#include <linux/pgtable.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/msr.h>
+#include <asm/cache.h>
+#include <asm/processor-flags.h>
+#include <asm/percpu.h>
+#include <asm/nops.h>
+#include "../entry/calling.h"
+#include <asm/export.h>
+#include <asm/nospec-branch.h>
+#include <asm/fixmap.h>
+
+/*
+ * We are not able to switch in one step to the final KERNEL ADDRESS SPACE
+ * because we need identity-mapped pages.
+ */
+#define l4_index(x)	(((x) >> 39) & 511)
+#define pud_index(x)	(((x) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+
+L4_PAGE_OFFSET = l4_index(__PAGE_OFFSET_BASE_L4)
+L4_START_KERNEL = l4_index(__START_KERNEL_map)
+
+L3_START_KERNEL = pud_index(__START_KERNEL_map)
+
+	.text
+	__HEAD
+	.code64
+SYM_CODE_START_NOALIGN(startup_64)
+	UNWIND_HINT_EMPTY
+	/*
+	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
+	 * and someone has loaded an identity mapped page table
+	 * for us.  These identity mapped page tables map all of the
+	 * kernel pages and possibly all of memory.
+	 *
+	 * %rsi holds a physical pointer to real_mode_data.
+	 *
+	 * We come here either directly from a 64bit bootloader, or from
+	 * arch/x86/boot/compressed/head_64.S.
+	 *
+	 * We only come here initially at boot nothing else comes here.
+	 *
+	 * Since we may be loaded at an address different from what we were
+	 * compiled to run at we first fixup the physical addresses in our page
+	 * tables and then reload them.
+	 */
+
+	/* Set up the stack for verify_cpu(), similar to initial_stack below */
+	leaq	(__end_init_task - FRAME_SIZE)(%rip), %rsp
+
+	leaq	_text(%rip), %rdi
+
+	/*
+	 * initial_gs points to initial fixed_percpu_data struct with storage for
+	 * the stack protector canary. Global pointer fixups are needed at this
+	 * stage, so apply them as is done in fixup_pointer(), and initialize %gs
+	 * such that the canary can be accessed at %gs:40 for subsequent C calls.
+	 */
+	movl	$MSR_GS_BASE, %ecx
+	movq	initial_gs(%rip), %rax
+	movq	$_text, %rdx
+	subq	%rdx, %rax
+	addq	%rdi, %rax
+	movq	%rax, %rdx
+	shrq	$32,  %rdx
+	wrmsr
+
+	pushq	%rsi
+	call	startup_64_setup_env
+	popq	%rsi
+
+#ifdef CONFIG_AMD_MEM_ENCRYPT
+	/*
+	 * Activate SEV/SME memory encryption if supported/enabled. This needs to
+	 * be done now, since this also includes setup of the SEV-SNP CPUID table,
+	 * which needs to be done before any CPUID instructions are executed in
+	 * subsequent code.
+	 */
+	movq	%rsi, %rdi
+	pushq	%rsi
+	call	sme_enable
+	popq	%rsi
+#endif
+
+	/* Now switch to __KERNEL_CS so IRET works reliably */
+	pushq	$__KERNEL_CS
+	leaq	.Lon_kernel_cs(%rip), %rax
+	pushq	%rax
+	lretq
+
+.Lon_kernel_cs:
+	UNWIND_HINT_EMPTY
+
+	/* Sanitize CPU configuration */
+	call verify_cpu
+
+	/*
+	 * Perform pagetable fixups. Additionally, if SME is active, encrypt
+	 * the kernel and retrieve the modifier (SME encryption mask if SME
+	 * is active) to be added to the initial pgdir entry that will be
+	 * programmed into CR3.
+	 */
+	leaq	_text(%rip), %rdi
+	pushq	%rsi
+	call	__startup_64
+	popq	%rsi
+
+	/* Form the CR3 value being sure to include the CR3 modifier */
+	addq	$(early_top_pgt - __START_KERNEL_map), %rax
+	jmp 1f
+SYM_CODE_END(startup_64)
+
+SYM_CODE_START(secondary_startup_64)
+	UNWIND_HINT_EMPTY
+	ANNOTATE_NOENDBR
+	/*
+	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
+	 * and someone has loaded a mapped page table.
+	 *
+	 * %rsi holds a physical pointer to real_mode_data.
+	 *
+	 * We come here either from startup_64 (using physical addresses)
+	 * or from trampoline.S (using virtual addresses).
+	 *
+	 * Using virtual addresses from trampoline.S removes the need
+	 * to have any identity mapped pages in the kernel page table
+	 * after the boot processor executes this code.
+	 */
+
+	/* Sanitize CPU configuration */
+	call verify_cpu
+
+	/*
+	 * The secondary_startup_64_no_verify entry point is only used by
+	 * SEV-ES guests. In those guests the call to verify_cpu() would cause
+	 * #VC exceptions which can not be handled at this stage of secondary
+	 * CPU bringup.
+	 *
+	 * All non SEV-ES systems, especially Intel systems, need to execute
+	 * verify_cpu() above to make sure NX is enabled.
+	 */
+SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
+	UNWIND_HINT_EMPTY
+	ANNOTATE_NOENDBR
+
+	/*
+	 * Retrieve the modifier (SME encryption mask if SME is active) to be
+	 * added to the initial pgdir entry that will be programmed into CR3.
+	 */
+#ifdef CONFIG_AMD_MEM_ENCRYPT
+	movq	sme_me_mask, %rax
+#else
+	xorq	%rax, %rax
+#endif
+
+	/* Form the CR3 value being sure to include the CR3 modifier */
+	addq	$(init_top_pgt - __START_KERNEL_map), %rax
+1:
+
+#ifdef CONFIG_X86_MCE
+	/*
+	 * Preserve CR4.MCE if the kernel will enable #MC support.
+	 * Clearing MCE may fault in some environments (that also force #MC
+	 * support). Any machine check that occurs before #MC support is fully
+	 * configured will crash the system regardless of the CR4.MCE value set
+	 * here.
+	 */
+	movq	%cr4, %rcx
+	andl	$X86_CR4_MCE, %ecx
+#else
+	movl	$0, %ecx
+#endif
+
+	/* Enable PAE mode, PGE and LA57 */
+	orl	$(X86_CR4_PAE | X86_CR4_PGE), %ecx
+#ifdef CONFIG_X86_5LEVEL
+	testl	$1, __pgtable_l5_enabled(%rip)
+	jz	1f
+	orl	$X86_CR4_LA57, %ecx
+1:
+#endif
+	movq	%rcx, %cr4
+
+	/* Setup early boot stage 4-/5-level pagetables. */
+	addq	phys_base(%rip), %rax
+
+	/*
+	 * For SEV guests: Verify that the C-bit is correct. A malicious
+	 * hypervisor could lie about the C-bit position to perform a ROP
+	 * attack on the guest by writing to the unencrypted stack and wait for
+	 * the next RET instruction.
+	 * %rsi carries pointer to realmode data and is callee-clobbered. Save
+	 * and restore it.
+	 */
+	pushq	%rsi
+	movq	%rax, %rdi
+	call	sev_verify_cbit
+	popq	%rsi
+
+	/*
+	 * Switch to new page-table
+	 *
+	 * For the boot CPU this switches to early_top_pgt which still has the
+	 * indentity mappings present. The secondary CPUs will switch to the
+	 * init_top_pgt here, away from the trampoline_pgd and unmap the
+	 * indentity mapped ranges.
+	 */
+	movq	%rax, %cr3
+
+	/*
+	 * Do a global TLB flush after the CR3 switch to make sure the TLB
+	 * entries from the identity mapping are flushed.
+	 */
+	movq	%cr4, %rcx
+	movq	%rcx, %rax
+	xorq	$X86_CR4_PGE, %rcx
+	movq	%rcx, %cr4
+	movq	%rax, %cr4
+
+	/* Ensure I am executing from virtual addresses */
+	movq	$1f, %rax
+	ANNOTATE_RETPOLINE_SAFE
+	jmp	*%rax
+1:
+	UNWIND_HINT_EMPTY
+	ANNOTATE_NOENDBR // above
+
+	/*
+	 * We must switch to a new descriptor in kernel space for the GDT
+	 * because soon the kernel won't have access anymore to the userspace
+	 * addresses where we're currently running on. We have to do that here
+	 * because in 32bit we couldn't load a 64bit linear address.
+	 */
+	lgdt	early_gdt_descr(%rip)
+
+	/* set up data segments */
+	xorl %eax,%eax
+	movl %eax,%ds
+	movl %eax,%ss
+	movl %eax,%es
+
+	/*
+	 * We don't really need to load %fs or %gs, but load them anyway
+	 * to kill any stale realmode selectors.  This allows execution
+	 * under VT hardware.
+	 */
+	movl %eax,%fs
+	movl %eax,%gs
+
+	/* Set up %gs.
+	 *
+	 * The base of %gs always points to fixed_percpu_data. If the
+	 * stack protector canary is enabled, it is located at %gs:40.
+	 * Note that, on SMP, the boot cpu uses init data section until
+	 * the per cpu areas are set up.
+	 */
+	movl	$MSR_GS_BASE,%ecx
+	movl	initial_gs(%rip),%eax
+	movl	initial_gs+4(%rip),%edx
+	wrmsr
+
+	/*
+	 * Setup a boot time stack - Any secondary CPU will have lost its stack
+	 * by now because the cr3-switch above unmaps the real-mode stack
+	 */
+	movq initial_stack(%rip), %rsp
+
+	/* Setup and Load IDT */
+	pushq	%rsi
+	call	early_setup_idt
+	popq	%rsi
+
+	/* Check if nx is implemented */
+	movl	$0x80000001, %eax
+	cpuid
+	movl	%edx,%edi
+
+	/* Setup EFER (Extended Feature Enable Register) */
+	movl	$MSR_EFER, %ecx
+	rdmsr
+	/*
+	 * Preserve current value of EFER for comparison and to skip
+	 * EFER writes if no change was made (for TDX guest)
+	 */
+	movl    %eax, %edx
+	btsl	$_EFER_SCE, %eax	/* Enable System Call */
+	btl	$20,%edi		/* No Execute supported? */
+	jnc     1f
+	btsl	$_EFER_NX, %eax
+	btsq	$_PAGE_BIT_NX,early_pmd_flags(%rip)
+
+	/* Avoid writing EFER if no change was made (for TDX guest) */
+1:	cmpl	%edx, %eax
+	je	1f
+	xor	%edx, %edx
+	wrmsr				/* Make changes effective */
+1:
+	/* Setup cr0 */
+	movl	$CR0_STATE, %eax
+	/* Make changes effective */
+	movq	%rax, %cr0
+
+	/* zero EFLAGS after setting rsp */
+	pushq $0
+	popfq
+
+	/* rsi is pointer to real mode structure with interesting info.
+	   pass it to C */
+	movq	%rsi, %rdi
+
+.Ljump_to_C_code:
+	/*
+	 * Jump to run C code and to be on a real kernel address.
+	 * Since we are running on identity-mapped space we have to jump
+	 * to the full 64bit address, this is only possible as indirect
+	 * jump.  In addition we need to ensure %cs is set so we make this
+	 * a far return.
+	 *
+	 * Note: do not change to far jump indirect with 64bit offset.
+	 *
+	 * AMD does not support far jump indirect with 64bit offset.
+	 * AMD64 Architecture Programmer's Manual, Volume 3: states only
+	 *	JMP FAR mem16:16 FF /5 Far jump indirect,
+	 *		with the target specified by a far pointer in memory.
+	 *	JMP FAR mem16:32 FF /5 Far jump indirect,
+	 *		with the target specified by a far pointer in memory.
+	 *
+	 * Intel64 does support 64bit offset.
+	 * Software Developer Manual Vol 2: states:
+	 *	FF /5 JMP m16:16 Jump far, absolute indirect,
+	 *		address given in m16:16
+	 *	FF /5 JMP m16:32 Jump far, absolute indirect,
+	 *		address given in m16:32.
+	 *	REX.W + FF /5 JMP m16:64 Jump far, absolute indirect,
+	 *		address given in m16:64.
+	 */
+	pushq	$.Lafter_lret	# put return address on stack for unwinder
+	xorl	%ebp, %ebp	# clear frame pointer
+	movq	initial_code(%rip), %rax
+	pushq	$__KERNEL_CS	# set correct cs
+	pushq	%rax		# target address in negative space
+	lretq
+.Lafter_lret:
+	ANNOTATE_NOENDBR
+SYM_CODE_END(secondary_startup_64)
+
+#include "verify_cpu.S"
+#include "sev_verify_cbit.S"
+
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * Boot CPU0 entry point. It's called from play_dead(). Everything has been set
+ * up already except stack. We just set up stack here. Then call
+ * start_secondary() via .Ljump_to_C_code.
+ */
+SYM_CODE_START(start_cpu0)
+	ANNOTATE_NOENDBR
+	UNWIND_HINT_EMPTY
+	movq	initial_stack(%rip), %rsp
+	jmp	.Ljump_to_C_code
+SYM_CODE_END(start_cpu0)
+#endif
+
+#ifdef CONFIG_AMD_MEM_ENCRYPT
+/*
+ * VC Exception handler used during early boot when running on kernel
+ * addresses, but before the switch to the idt_table can be made.
+ * The early_idt_handler_array can't be used here because it calls into a lot
+ * of __init code and this handler is also used during CPU offlining/onlining.
+ * Therefore this handler ends up in the .text section so that it stays around
+ * when .init.text is freed.
+ */
+SYM_CODE_START_NOALIGN(vc_boot_ghcb)
+	UNWIND_HINT_IRET_REGS offset=8
+	ENDBR
+
+	ANNOTATE_UNRET_END
+
+	/* Build pt_regs */
+	PUSH_AND_CLEAR_REGS
+
+	/* Call C handler */
+	movq    %rsp, %rdi
+	movq	ORIG_RAX(%rsp), %rsi
+	movq	initial_vc_handler(%rip), %rax
+	ANNOTATE_RETPOLINE_SAFE
+	call	*%rax
+
+	/* Unwind pt_regs */
+	POP_REGS
+
+	/* Remove Error Code */
+	addq    $8, %rsp
+
+	iretq
+SYM_CODE_END(vc_boot_ghcb)
+#endif
+
+	/* Both SMP bootup and ACPI suspend change these variables */
+	__REFDATA
+	.balign	8
+SYM_DATA(initial_code,	.quad x86_64_start_kernel)
+SYM_DATA(initial_gs,	.quad INIT_PER_CPU_VAR(fixed_percpu_data))
+#ifdef CONFIG_AMD_MEM_ENCRYPT
+SYM_DATA(initial_vc_handler,	.quad handle_vc_boot_ghcb)
+#endif
+
+/*
+ * The FRAME_SIZE gap is a convention which helps the in-kernel unwinder
+ * reliably detect the end of the stack.
+ */
+SYM_DATA(initial_stack, .quad init_thread_union + THREAD_SIZE - FRAME_SIZE)
+	__FINITDATA
+
+	__INIT
+SYM_CODE_START(early_idt_handler_array)
+	i = 0
+	.rept NUM_EXCEPTION_VECTORS
+	.if ((EXCEPTION_ERRCODE_MASK >> i) & 1) == 0
+		UNWIND_HINT_IRET_REGS
+		ENDBR
+		pushq $0	# Dummy error code, to make stack frame uniform
+	.else
+		UNWIND_HINT_IRET_REGS offset=8
+		ENDBR
+	.endif
+	pushq $i		# 72(%rsp) Vector number
+	jmp early_idt_handler_common
+	UNWIND_HINT_IRET_REGS
+	i = i + 1
+	.fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
+	.endr
+SYM_CODE_END(early_idt_handler_array)
+	ANNOTATE_NOENDBR // early_idt_handler_array[NUM_EXCEPTION_VECTORS]
+
+SYM_CODE_START_LOCAL(early_idt_handler_common)
+	UNWIND_HINT_IRET_REGS offset=16
+	ANNOTATE_UNRET_END
+	/*
+	 * The stack is the hardware frame, an error code or zero, and the
+	 * vector number.
+	 */
+	cld
+
+	incl early_recursion_flag(%rip)
+
+	/* The vector number is currently in the pt_regs->di slot. */
+	pushq %rsi				/* pt_regs->si */
+	movq 8(%rsp), %rsi			/* RSI = vector number */
+	movq %rdi, 8(%rsp)			/* pt_regs->di = RDI */
+	pushq %rdx				/* pt_regs->dx */
+	pushq %rcx				/* pt_regs->cx */
+	pushq %rax				/* pt_regs->ax */
+	pushq %r8				/* pt_regs->r8 */
+	pushq %r9				/* pt_regs->r9 */
+	pushq %r10				/* pt_regs->r10 */
+	pushq %r11				/* pt_regs->r11 */
+	pushq %rbx				/* pt_regs->bx */
+	pushq %rbp				/* pt_regs->bp */
+	pushq %r12				/* pt_regs->r12 */
+	pushq %r13				/* pt_regs->r13 */
+	pushq %r14				/* pt_regs->r14 */
+	pushq %r15				/* pt_regs->r15 */
+	UNWIND_HINT_REGS
+
+	movq %rsp,%rdi		/* RDI = pt_regs; RSI is already trapnr */
+	call do_early_exception
+
+	decl early_recursion_flag(%rip)
+	jmp restore_regs_and_return_to_kernel
+SYM_CODE_END(early_idt_handler_common)
+
+#ifdef CONFIG_AMD_MEM_ENCRYPT
+/*
+ * VC Exception handler used during very early boot. The
+ * early_idt_handler_array can't be used because it returns via the
+ * paravirtualized INTERRUPT_RETURN and pv-ops don't work that early.
+ *
+ * XXX it does, fix this.
+ *
+ * This handler will end up in the .init.text section and not be
+ * available to boot secondary CPUs.
+ */
+SYM_CODE_START_NOALIGN(vc_no_ghcb)
+	UNWIND_HINT_IRET_REGS offset=8
+	ENDBR
+
+	ANNOTATE_UNRET_END
+
+	/* Build pt_regs */
+	PUSH_AND_CLEAR_REGS
+
+	/* Call C handler */
+	movq    %rsp, %rdi
+	movq	ORIG_RAX(%rsp), %rsi
+	call    do_vc_no_ghcb
+
+	/* Unwind pt_regs */
+	POP_REGS
+
+	/* Remove Error Code */
+	addq    $8, %rsp
+
+	/* Pure iret required here - don't use INTERRUPT_RETURN */
+	iretq
+SYM_CODE_END(vc_no_ghcb)
+#endif
+
+#define SYM_DATA_START_PAGE_ALIGNED(name)			\
+	SYM_START(name, SYM_L_GLOBAL, .balign PAGE_SIZE)
+
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+/*
+ * Each PGD needs to be 8k long and 8k aligned.  We do not
+ * ever go out to userspace with these, so we do not
+ * strictly *need* the second page, but this allows us to
+ * have a single set_pgd() implementation that does not
+ * need to worry about whether it has 4k or 8k to work
+ * with.
+ *
+ * This ensures PGDs are 8k long:
+ */
+#define PTI_USER_PGD_FILL	512
+/* This ensures they are 8k-aligned: */
+#define SYM_DATA_START_PTI_ALIGNED(name) \
+	SYM_START(name, SYM_L_GLOBAL, .balign 2 * PAGE_SIZE)
+#else
+#define SYM_DATA_START_PTI_ALIGNED(name) \
+	SYM_DATA_START_PAGE_ALIGNED(name)
+#define PTI_USER_PGD_FILL	0
+#endif
+
+/* Automate the creation of 1 to 1 mapping pmd entries */
+#define PMDS(START, PERM, COUNT)			\
+	i = 0 ;						\
+	.rept (COUNT) ;					\
+	.quad	(START) + (i << PMD_SHIFT) + (PERM) ;	\
+	i = i + 1 ;					\
+	.endr
+
+	__INITDATA
+	.balign 4
+
+SYM_DATA_START_PTI_ALIGNED(early_top_pgt)
+	.fill	512,8,0
+	.fill	PTI_USER_PGD_FILL,8,0
+SYM_DATA_END(early_top_pgt)
+
+SYM_DATA_START_PAGE_ALIGNED(early_dynamic_pgts)
+	.fill	512*EARLY_DYNAMIC_PAGE_TABLES,8,0
+SYM_DATA_END(early_dynamic_pgts)
+
+SYM_DATA(early_recursion_flag, .long 0)
+
+	.data
+
+#if defined(CONFIG_XEN_PV) || defined(CONFIG_PVH)
+SYM_DATA_START_PTI_ALIGNED(init_top_pgt)
+	.quad   level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC
+	.org    init_top_pgt + L4_PAGE_OFFSET*8, 0
+	.quad   level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC
+	.org    init_top_pgt + L4_START_KERNEL*8, 0
+	/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
+	.quad   level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC
+	.fill	PTI_USER_PGD_FILL,8,0
+SYM_DATA_END(init_top_pgt)
+
+SYM_DATA_START_PAGE_ALIGNED(level3_ident_pgt)
+	.quad	level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC
+	.fill	511, 8, 0
+SYM_DATA_END(level3_ident_pgt)
+SYM_DATA_START_PAGE_ALIGNED(level2_ident_pgt)
+	/*
+	 * Since I easily can, map the first 1G.
+	 * Don't set NX because code runs from these pages.
+	 *
+	 * Note: This sets _PAGE_GLOBAL despite whether
+	 * the CPU supports it or it is enabled.  But,
+	 * the CPU should ignore the bit.
+	 */
+	PMDS(0, __PAGE_KERNEL_IDENT_LARGE_EXEC, PTRS_PER_PMD)
+SYM_DATA_END(level2_ident_pgt)
+#else
+SYM_DATA_START_PTI_ALIGNED(init_top_pgt)
+	.fill	512,8,0
+	.fill	PTI_USER_PGD_FILL,8,0
+SYM_DATA_END(init_top_pgt)
+#endif
+
+#ifdef CONFIG_X86_5LEVEL
+SYM_DATA_START_PAGE_ALIGNED(level4_kernel_pgt)
+	.fill	511,8,0
+	.quad	level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC
+SYM_DATA_END(level4_kernel_pgt)
+#endif
+
+SYM_DATA_START_PAGE_ALIGNED(level3_kernel_pgt)
+	.fill	L3_START_KERNEL,8,0
+	/* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
+	.quad	level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC
+	.quad	level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC
+SYM_DATA_END(level3_kernel_pgt)
+
+SYM_DATA_START_PAGE_ALIGNED(level2_kernel_pgt)
+	/*
+	 * Kernel high mapping.
+	 *
+	 * The kernel code+data+bss must be located below KERNEL_IMAGE_SIZE in
+	 * virtual address space, which is 1 GiB if RANDOMIZE_BASE is enabled,
+	 * 512 MiB otherwise.
+	 *
+	 * (NOTE: after that starts the module area, see MODULES_VADDR.)
+	 *
+	 * This table is eventually used by the kernel during normal runtime.
+	 * Care must be taken to clear out undesired bits later, like _PAGE_RW
+	 * or _PAGE_GLOBAL in some cases.
+	 */
+	PMDS(0, __PAGE_KERNEL_LARGE_EXEC, KERNEL_IMAGE_SIZE/PMD_SIZE)
+SYM_DATA_END(level2_kernel_pgt)
+
+SYM_DATA_START_PAGE_ALIGNED(level2_fixmap_pgt)
+	.fill	(512 - 4 - FIXMAP_PMD_NUM),8,0
+	pgtno = 0
+	.rept (FIXMAP_PMD_NUM)
+	.quad level1_fixmap_pgt + (pgtno << PAGE_SHIFT) - __START_KERNEL_map \
+		+ _PAGE_TABLE_NOENC;
+	pgtno = pgtno + 1
+	.endr
+	/* 6 MB reserved space + a 2MB hole */
+	.fill	4,8,0
+SYM_DATA_END(level2_fixmap_pgt)
+
+SYM_DATA_START_PAGE_ALIGNED(level1_fixmap_pgt)
+	.rept (FIXMAP_PMD_NUM)
+	.fill	512,8,0
+	.endr
+SYM_DATA_END(level1_fixmap_pgt)
+
+#undef PMDS
+
+	.data
+	.align 16
+
+SYM_DATA(early_gdt_descr,		.word GDT_ENTRIES*8-1)
+SYM_DATA_LOCAL(early_gdt_descr_base,	.quad INIT_PER_CPU_VAR(gdt_page))
+
+	.align 16
+/* This must match the first entry in level2_kernel_pgt */
+SYM_DATA(phys_base, .quad 0x0)
+EXPORT_SYMBOL(phys_base)
+
+#include "../../x86/xen/xen-head.S"
+
+	__PAGE_ALIGNED_BSS
+SYM_DATA_START_PAGE_ALIGNED(empty_zero_page)
+	.skip PAGE_SIZE
+SYM_DATA_END(empty_zero_page)
+EXPORT_SYMBOL(empty_zero_page)
+