Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 406 insertions, 0 deletions

diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
new file mode 100644
index 000000000..8edd62206
--- /dev/null
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel MID PCI support
+ *   Copyright (c) 2008 Intel Corporation
+ *     Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Moorestown has an interesting PCI implementation:
+ *   - configuration space is memory mapped (as defined by MCFG)
+ *   - Lincroft devices also have a real, type 1 configuration space
+ *   - Early Lincroft silicon has a type 1 access bug that will cause
+ *     a hang if non-existent devices are accessed
+ *   - some devices have the "fixed BAR" capability, which means
+ *     they can't be relocated or modified; check for that during
+ *     BAR sizing
+ *
+ * So, we use the MCFG space for all reads and writes, but also send
+ * Lincroft writes to type 1 space.  But only read/write if the device
+ * actually exists, otherwise return all 1s for reads and bit bucket
+ * the writes.
+ */
+
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/segment.h>
+#include <asm/pci_x86.h>
+#include <asm/hw_irq.h>
+#include <asm/io_apic.h>
+#include <asm/intel-family.h>
+#include <asm/intel-mid.h>
+#include <asm/acpi.h>
+
+#define PCIE_CAP_OFFSET	0x100
+
+/* Quirks for the listed devices */
+#define PCI_DEVICE_ID_INTEL_MRFLD_MMC	0x1190
+#define PCI_DEVICE_ID_INTEL_MRFLD_HSU	0x1191
+
+/* Fixed BAR fields */
+#define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00	/* Fixed BAR (TBD) */
+#define PCI_FIXED_BAR_0_SIZE	0x04
+#define PCI_FIXED_BAR_1_SIZE	0x08
+#define PCI_FIXED_BAR_2_SIZE	0x0c
+#define PCI_FIXED_BAR_3_SIZE	0x10
+#define PCI_FIXED_BAR_4_SIZE	0x14
+#define PCI_FIXED_BAR_5_SIZE	0x1c
+
+static int pci_soc_mode;
+
+/**
+ * fixed_bar_cap - return the offset of the fixed BAR cap if found
+ * @bus: PCI bus
+ * @devfn: device in question
+ *
+ * Look for the fixed BAR cap on @bus and @devfn, returning its offset
+ * if found or 0 otherwise.
+ */
+static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
+{
+	int pos;
+	u32 pcie_cap = 0, cap_data;
+
+	pos = PCIE_CAP_OFFSET;
+
+	if (!raw_pci_ext_ops)
+		return 0;
+
+	while (pos) {
+		if (raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
+					  devfn, pos, 4, &pcie_cap))
+			return 0;
+
+		if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
+			PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
+			break;
+
+		if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
+			raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
+					      devfn, pos + 4, 4, &cap_data);
+			if ((cap_data & 0xffff) == PCIE_VNDR_CAP_ID_FIXED_BAR)
+				return pos;
+		}
+
+		pos = PCI_EXT_CAP_NEXT(pcie_cap);
+	}
+
+	return 0;
+}
+
+static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
+				   int reg, int len, u32 val, int offset)
+{
+	u32 size;
+	unsigned int domain, busnum;
+	int bar = (reg - PCI_BASE_ADDRESS_0) >> 2;
+
+	domain = pci_domain_nr(bus);
+	busnum = bus->number;
+
+	if (val == ~0 && len == 4) {
+		unsigned long decode;
+
+		raw_pci_ext_ops->read(domain, busnum, devfn,
+			       offset + 8 + (bar * 4), 4, &size);
+
+		/* Turn the size into a decode pattern for the sizing code */
+		if (size) {
+			decode = size - 1;
+			decode |= decode >> 1;
+			decode |= decode >> 2;
+			decode |= decode >> 4;
+			decode |= decode >> 8;
+			decode |= decode >> 16;
+			decode++;
+			decode = ~(decode - 1);
+		} else {
+			decode = 0;
+		}
+
+		/*
+		 * If val is all ones, the core code is trying to size the reg,
+		 * so update the mmconfig space with the real size.
+		 *
+		 * Note: this assumes the fixed size we got is a power of two.
+		 */
+		return raw_pci_ext_ops->write(domain, busnum, devfn, reg, 4,
+				       decode);
+	}
+
+	/* This is some other kind of BAR write, so just do it. */
+	return raw_pci_ext_ops->write(domain, busnum, devfn, reg, len, val);
+}
+
+/**
+ * type1_access_ok - check whether to use type 1
+ * @bus: bus number
+ * @devfn: device & function in question
+ * @reg: configuration register offset
+ *
+ * If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at
+ * all, the we can go ahead with any reads & writes.  If it's on a Lincroft,
+ * but doesn't exist, avoid the access altogether to keep the chip from
+ * hanging.
+ */
+static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
+{
+	/*
+	 * This is a workaround for A0 LNC bug where PCI status register does
+	 * not have new CAP bit set. can not be written by SW either.
+	 *
+	 * PCI header type in real LNC indicates a single function device, this
+	 * will prevent probing other devices under the same function in PCI
+	 * shim. Therefore, use the header type in shim instead.
+	 */
+	if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
+		return false;
+	if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
+				|| devfn == PCI_DEVFN(0, 0)
+				|| devfn == PCI_DEVFN(3, 0)))
+		return true;
+	return false; /* Langwell on others */
+}
+
+static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+		    int size, u32 *value)
+{
+	if (type1_access_ok(bus->number, devfn, where))
+		return pci_direct_conf1.read(pci_domain_nr(bus), bus->number,
+					devfn, where, size, value);
+	return raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
+			      devfn, where, size, value);
+}
+
+static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+		     int size, u32 value)
+{
+	int offset;
+
+	/*
+	 * On MRST, there is no PCI ROM BAR, this will cause a subsequent read
+	 * to ROM BAR return 0 then being ignored.
+	 */
+	if (where == PCI_ROM_ADDRESS)
+		return 0;
+
+	/*
+	 * Devices with fixed BARs need special handling:
+	 *   - BAR sizing code will save, write ~0, read size, restore
+	 *   - so writes to fixed BARs need special handling
+	 *   - other writes to fixed BAR devices should go through mmconfig
+	 */
+	offset = fixed_bar_cap(bus, devfn);
+	if (offset &&
+	    (where >= PCI_BASE_ADDRESS_0 && where <= PCI_BASE_ADDRESS_5)) {
+		return pci_device_update_fixed(bus, devfn, where, size, value,
+					       offset);
+	}
+
+	/*
+	 * On Moorestown update both real & mmconfig space
+	 * Note: early Lincroft silicon can't handle type 1 accesses to
+	 *       non-existent devices, so just eat the write in that case.
+	 */
+	if (type1_access_ok(bus->number, devfn, where))
+		return pci_direct_conf1.write(pci_domain_nr(bus), bus->number,
+					      devfn, where, size, value);
+	return raw_pci_ext_ops->write(pci_domain_nr(bus), bus->number, devfn,
+			       where, size, value);
+}
+
+static const struct x86_cpu_id intel_mid_cpu_ids[] = {
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_MID, NULL),
+	{}
+};
+
+static int intel_mid_pci_irq_enable(struct pci_dev *dev)
+{
+	const struct x86_cpu_id *id;
+	struct irq_alloc_info info;
+	bool polarity_low;
+	u16 model = 0;
+	int ret;
+	u8 gsi;
+
+	if (dev->irq_managed && dev->irq > 0)
+		return 0;
+
+	ret = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi);
+	if (ret < 0) {
+		dev_warn(&dev->dev, "Failed to read interrupt line: %d\n", ret);
+		return ret;
+	}
+
+	id = x86_match_cpu(intel_mid_cpu_ids);
+	if (id)
+		model = id->model;
+
+	switch (model) {
+	case INTEL_FAM6_ATOM_SILVERMONT_MID:
+		polarity_low = false;
+
+		/* Special treatment for IRQ0 */
+		if (gsi == 0) {
+			/*
+			 * Skip HS UART common registers device since it has
+			 * IRQ0 assigned and not used by the kernel.
+			 */
+			if (dev->device == PCI_DEVICE_ID_INTEL_MRFLD_HSU)
+				return -EBUSY;
+			/*
+			 * TNG has IRQ0 assigned to eMMC controller. But there
+			 * are also other devices with bogus PCI configuration
+			 * that have IRQ0 assigned. This check ensures that
+			 * eMMC gets it. The rest of devices still could be
+			 * enabled without interrupt line being allocated.
+			 */
+			if (dev->device != PCI_DEVICE_ID_INTEL_MRFLD_MMC)
+				return 0;
+		}
+		break;
+	default:
+		polarity_low = true;
+		break;
+	}
+
+	ioapic_set_alloc_attr(&info, dev_to_node(&dev->dev), 1, polarity_low);
+
+	/*
+	 * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
+	 * IOAPIC RTE entries, so we just enable RTE for the device.
+	 */
+	ret = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC, &info);
+	if (ret < 0)
+		return ret;
+
+	dev->irq = ret;
+	dev->irq_managed = 1;
+
+	return 0;
+}
+
+static void intel_mid_pci_irq_disable(struct pci_dev *dev)
+{
+	if (!mp_should_keep_irq(&dev->dev) && dev->irq_managed &&
+	    dev->irq > 0) {
+		mp_unmap_irq(dev->irq);
+		dev->irq_managed = 0;
+	}
+}
+
+static const struct pci_ops intel_mid_pci_ops __initconst = {
+	.read = pci_read,
+	.write = pci_write,
+};
+
+/**
+ * intel_mid_pci_init - installs intel_mid_pci_ops
+ *
+ * Moorestown has an interesting PCI implementation (see above).
+ * Called when the early platform detection installs it.
+ */
+int __init intel_mid_pci_init(void)
+{
+	pr_info("Intel MID platform detected, using MID PCI ops\n");
+	pci_mmcfg_late_init();
+	pcibios_enable_irq = intel_mid_pci_irq_enable;
+	pcibios_disable_irq = intel_mid_pci_irq_disable;
+	pci_root_ops = intel_mid_pci_ops;
+	pci_soc_mode = 1;
+	/* Continue with standard init */
+	acpi_noirq_set();
+	return 1;
+}
+
+/*
+ * Langwell devices are not true PCI devices; they are not subject to 10 ms
+ * d3 to d0 delay required by PCI spec.
+ */
+static void pci_d3delay_fixup(struct pci_dev *dev)
+{
+	/*
+	 * PCI fixups are effectively decided compile time. If we have a dual
+	 * SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices.
+	 */
+	if (!pci_soc_mode)
+		return;
+	/*
+	 * True PCI devices in Lincroft should allow type 1 access, the rest
+	 * are Langwell fake PCI devices.
+	 */
+	if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
+		return;
+	dev->d3hot_delay = 0;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup);
+
+static void mid_power_off_one_device(struct pci_dev *dev)
+{
+	u16 pmcsr;
+
+	/*
+	 * Update current state first, otherwise PCI core enforces PCI_D0 in
+	 * pci_set_power_state() for devices which status was PCI_UNKNOWN.
+	 */
+	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+	dev->current_state = (pci_power_t __force)(pmcsr & PCI_PM_CTRL_STATE_MASK);
+
+	pci_set_power_state(dev, PCI_D3hot);
+}
+
+static void mid_power_off_devices(struct pci_dev *dev)
+{
+	int id;
+
+	if (!pci_soc_mode)
+		return;
+
+	id = intel_mid_pwr_get_lss_id(dev);
+	if (id < 0)
+		return;
+
+	/*
+	 * This sets only PMCSR bits. The actual power off will happen in
+	 * arch/x86/platform/intel-mid/pwr.c.
+	 */
+	mid_power_off_one_device(dev);
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, mid_power_off_devices);
+
+/*
+ * Langwell devices reside at fixed offsets, don't try to move them.
+ */
+static void pci_fixed_bar_fixup(struct pci_dev *dev)
+{
+	unsigned long offset;
+	u32 size;
+	int i;
+
+	if (!pci_soc_mode)
+		return;
+
+	/* Must have extended configuration space */
+	if (dev->cfg_size < PCIE_CAP_OFFSET + 4)
+		return;
+
+	/* Fixup the BAR sizes for fixed BAR devices and make them unmoveable */
+	offset = fixed_bar_cap(dev->bus, dev->devfn);
+	if (!offset || PCI_DEVFN(2, 0) == dev->devfn ||
+	    PCI_DEVFN(2, 2) == dev->devfn)
+		return;
+
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+		pci_read_config_dword(dev, offset + 8 + (i * 4), &size);
+		dev->resource[i].end = dev->resource[i].start + size - 1;
+		dev->resource[i].flags |= IORESOURCE_PCI_FIXED;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixed_bar_fixup);