Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 214 insertions, 0 deletions

diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
new file mode 100644
index 000000000..16b8a6273
--- /dev/null
+++ b/arch/xtensa/kernel/time.c
@@ -0,0 +1,214 @@
+/*
+ * arch/xtensa/kernel/time.c
+ *
+ * Timer and clock support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Tensilica Inc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ */
+
+#include <linux/clk.h>
+#include <linux/of_clk.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/delay.h>
+#include <linux/irqdomain.h>
+#include <linux/sched_clock.h>
+
+#include <asm/timex.h>
+#include <asm/platform.h>
+
+unsigned long ccount_freq;		/* ccount Hz */
+EXPORT_SYMBOL(ccount_freq);
+
+static u64 ccount_read(struct clocksource *cs)
+{
+	return (u64)get_ccount();
+}
+
+static u64 notrace ccount_sched_clock_read(void)
+{
+	return get_ccount();
+}
+
+static struct clocksource ccount_clocksource = {
+	.name = "ccount",
+	.rating = 200,
+	.read = ccount_read,
+	.mask = CLOCKSOURCE_MASK(32),
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+struct ccount_timer {
+	struct clock_event_device evt;
+	int irq_enabled;
+	char name[24];
+};
+
+static int ccount_timer_set_next_event(unsigned long delta,
+		struct clock_event_device *dev)
+{
+	unsigned long flags, next;
+	int ret = 0;
+
+	local_irq_save(flags);
+	next = get_ccount() + delta;
+	set_linux_timer(next);
+	if (next - get_ccount() > delta)
+		ret = -ETIME;
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+/*
+ * There is no way to disable the timer interrupt at the device level,
+ * only at the intenable register itself. Since enable_irq/disable_irq
+ * calls are nested, we need to make sure that these calls are
+ * balanced.
+ */
+static int ccount_timer_shutdown(struct clock_event_device *evt)
+{
+	struct ccount_timer *timer =
+		container_of(evt, struct ccount_timer, evt);
+
+	if (timer->irq_enabled) {
+		disable_irq_nosync(evt->irq);
+		timer->irq_enabled = 0;
+	}
+	return 0;
+}
+
+static int ccount_timer_set_oneshot(struct clock_event_device *evt)
+{
+	struct ccount_timer *timer =
+		container_of(evt, struct ccount_timer, evt);
+
+	if (!timer->irq_enabled) {
+		enable_irq(evt->irq);
+		timer->irq_enabled = 1;
+	}
+	return 0;
+}
+
+static DEFINE_PER_CPU(struct ccount_timer, ccount_timer) = {
+	.evt = {
+		.features = CLOCK_EVT_FEAT_ONESHOT,
+		.rating = 300,
+		.set_next_event = ccount_timer_set_next_event,
+		.set_state_shutdown = ccount_timer_shutdown,
+		.set_state_oneshot = ccount_timer_set_oneshot,
+		.tick_resume = ccount_timer_set_oneshot,
+	},
+};
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &this_cpu_ptr(&ccount_timer)->evt;
+
+	set_linux_timer(get_linux_timer());
+	evt->event_handler(evt);
+
+	/* Allow platform to do something useful (Wdog). */
+	platform_heartbeat();
+
+	return IRQ_HANDLED;
+}
+
+void local_timer_setup(unsigned cpu)
+{
+	struct ccount_timer *timer = &per_cpu(ccount_timer, cpu);
+	struct clock_event_device *clockevent = &timer->evt;
+
+	timer->irq_enabled = 1;
+	snprintf(timer->name, sizeof(timer->name), "ccount_clockevent_%u", cpu);
+	clockevent->name = timer->name;
+	clockevent->cpumask = cpumask_of(cpu);
+	clockevent->irq = irq_create_mapping(NULL, LINUX_TIMER_INT);
+	if (WARN(!clockevent->irq, "error: can't map timer irq"))
+		return;
+	clockevents_config_and_register(clockevent, ccount_freq,
+					0xf, 0xffffffff);
+}
+
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
+#ifdef CONFIG_OF
+static void __init calibrate_ccount(void)
+{
+	struct device_node *cpu;
+	struct clk *clk;
+
+	cpu = of_find_compatible_node(NULL, NULL, "cdns,xtensa-cpu");
+	if (cpu) {
+		clk = of_clk_get(cpu, 0);
+		of_node_put(cpu);
+		if (!IS_ERR(clk)) {
+			ccount_freq = clk_get_rate(clk);
+			return;
+		} else {
+			pr_warn("%s: CPU input clock not found\n",
+				__func__);
+		}
+	} else {
+		pr_warn("%s: CPU node not found in the device tree\n",
+			__func__);
+	}
+
+	platform_calibrate_ccount();
+}
+#else
+static inline void calibrate_ccount(void)
+{
+	platform_calibrate_ccount();
+}
+#endif
+#endif
+
+void __init time_init(void)
+{
+	int irq;
+
+	of_clk_init(NULL);
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
+	pr_info("Calibrating CPU frequency ");
+	calibrate_ccount();
+	pr_cont("%d.%02d MHz\n",
+		(int)ccount_freq / 1000000,
+		(int)(ccount_freq / 10000) % 100);
+#else
+	ccount_freq = CONFIG_XTENSA_CPU_CLOCK*1000000UL;
+#endif
+	WARN(!ccount_freq,
+	     "%s: CPU clock frequency is not set up correctly\n",
+	     __func__);
+	clocksource_register_hz(&ccount_clocksource, ccount_freq);
+	local_timer_setup(0);
+	irq = this_cpu_ptr(&ccount_timer)->evt.irq;
+	if (request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL))
+		pr_err("Failed to request irq %d (timer)\n", irq);
+	sched_clock_register(ccount_sched_clock_read, 32, ccount_freq);
+	timer_probe();
+}
+
+#ifndef CONFIG_GENERIC_CALIBRATE_DELAY
+void calibrate_delay(void)
+{
+	loops_per_jiffy = ccount_freq / HZ;
+	pr_info("Calibrating delay loop (skipped)... %lu.%02lu BogoMIPS preset\n",
+		loops_per_jiffy / (1000000 / HZ),
+		(loops_per_jiffy / (10000 / HZ)) % 100);
+}
+#endif