Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 424 insertions, 0 deletions

diff --git a/arch/xtensa/variants/dc232b/include/variant/core.h b/arch/xtensa/variants/dc232b/include/variant/core.h
new file mode 100644
index 000000000..525bd3d90
--- /dev/null
+++ b/arch/xtensa/variants/dc232b/include/variant/core.h
@@ -0,0 +1,424 @@
+/*
+ * Xtensa processor core configuration information.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1999-2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_CONFIGURATION_H
+#define _XTENSA_CORE_CONFIGURATION_H
+
+
+/****************************************************************************
+	    Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ *  Note:  Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ *  configured, and a value of 0 otherwise.  These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+				ISA
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE			0	/* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED		1	/* windowed registers option */
+#define XCHAL_NUM_AREGS			32	/* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2		5	/* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE	3	/* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG		1	/* debug option */
+#define XCHAL_HAVE_DENSITY		1	/* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS		1	/* zero-overhead loops */
+#define XCHAL_HAVE_NSA			1	/* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX		1	/* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT			1	/* SEXT instruction */
+#define XCHAL_HAVE_CLAMPS		1	/* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16		1	/* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32		1	/* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH		0	/* MULUH/MULSH instructions */
+#define XCHAL_HAVE_DIV32		1	/* QUOS/QUOU/REMS/REMU instructions */
+#define XCHAL_HAVE_L32R			1	/* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS	1	/* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16		0	/* CONST16 instruction */
+#define XCHAL_HAVE_ADDX			1	/* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES	0	/* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES	0	/* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12		1	/* (obsolete option) */
+#define XCHAL_HAVE_ABS			1	/* ABS instruction */
+/*#define XCHAL_HAVE_POPC		0*/	/* POPC instruction */
+/*#define XCHAL_HAVE_CRC		0*/	/* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC		1	/* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I		1	/* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION		0	/* speculation */
+#define XCHAL_HAVE_FULL_RESET		1	/* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS		1	/* */
+#define XCHAL_NUM_MISC_REGS		2	/* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER		0	/* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID			1	/* processor ID register */
+#define XCHAL_HAVE_THREADPTR		1	/* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS		0	/* boolean registers */
+#define XCHAL_HAVE_CP			1	/* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG			8	/* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16		1	/* MAC16 package */
+#define XCHAL_HAVE_VECTORFPU2005	0	/* vector floating-point pkg */
+#define XCHAL_HAVE_FP			0	/* floating point pkg */
+#define XCHAL_HAVE_VECTRA1		0	/* Vectra I  pkg */
+#define XCHAL_HAVE_VECTRALX		0	/* Vectra LX pkg */
+#define XCHAL_HAVE_HIFI2		0	/* HiFi2 Audio Engine pkg */
+
+
+/*----------------------------------------------------------------------
+				MISC
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES	8	/* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH		4	/* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH		4	/* data width in bytes */
+/*  In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION	1	/* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION	1	/* unaligned stores cause exc.*/
+
+#define XCHAL_SW_VERSION		701001	/* sw version of this header */
+
+#define XCHAL_CORE_ID			"dc232b"	/* alphanum core name
+						   (CoreID) set in the Xtensa
+						   Processor Generator */
+
+#define XCHAL_CORE_DESCRIPTION		"Diamond 232L Standard Core Rev.B (LE)"
+#define XCHAL_BUILD_UNIQUE_ID		0x0000BEEF	/* 22-bit sw build ID */
+
+/*
+ *  These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0		0xC56307FE	/* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1		0x0D40BEEF	/* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME		"LX2.1.1"	/* full version name */
+#define XCHAL_HW_VERSION_MAJOR		2210	/* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR		1	/* minor ver# of targeted hw */
+#define XCHAL_HW_VERSION		221001	/* major*100+minor */
+#define XCHAL_HW_REL_LX2		1
+#define XCHAL_HW_REL_LX2_1		1
+#define XCHAL_HW_REL_LX2_1_1		1
+#define XCHAL_HW_CONFIGID_RELIABLE	1
+/*  If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR	2210	/* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR	1	/* minor v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION		221001	/* earliest targeted hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR	2210	/* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR	1	/* minor v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION		221001	/* latest targeted hw */
+
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE		32	/* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE		32	/* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH		5	/* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH		5	/* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE		16384	/* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE		16384	/* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK	1	/* writeback feature */
+
+
+
+
+/****************************************************************************
+    Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF			1	/* any outbound PIF present */
+
+/*  If present, cache size in bytes == (ways * 2^(linewidth + setwidth)).  */
+
+/*  Number of cache sets in log2(lines per way):  */
+#define XCHAL_ICACHE_SETWIDTH		7
+#define XCHAL_DCACHE_SETWIDTH		7
+
+/*  Cache set associativity (number of ways):  */
+#define XCHAL_ICACHE_WAYS		4
+#define XCHAL_DCACHE_WAYS		4
+
+/*  Cache features:  */
+#define XCHAL_ICACHE_LINE_LOCKABLE	1
+#define XCHAL_DCACHE_LINE_LOCKABLE	1
+#define XCHAL_ICACHE_ECC_PARITY		0
+#define XCHAL_DCACHE_ECC_PARITY		0
+
+/*  Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits):  */
+#define XCHAL_CA_BITS			4
+
+
+/*----------------------------------------------------------------------
+			INTERNAL I/D RAM/ROMs and XLMI
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_INSTROM		0	/* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM		0	/* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM		0	/* number of core data ROMs */
+#define XCHAL_NUM_DATARAM		0	/* number of core data RAMs */
+#define XCHAL_NUM_URAM			0	/* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI			0	/* number of core XLMI ports */
+
+
+/*----------------------------------------------------------------------
+			INTERRUPTS and TIMERS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS		1	/* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS	1	/* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI			1	/* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT		1	/* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS		3	/* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS		22	/* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2	5	/* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS		17	/* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS		6	/* number of interrupt levels
+						   (not including level zero) */
+#define XCHAL_EXCM_LEVEL		3	/* level masked by PS.EXCM */
+	/* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/*  Masks of interrupts at each interrupt level:  */
+#define XCHAL_INTLEVEL1_MASK		0x001F80FF
+#define XCHAL_INTLEVEL2_MASK		0x00000100
+#define XCHAL_INTLEVEL3_MASK		0x00200E00
+#define XCHAL_INTLEVEL4_MASK		0x00001000
+#define XCHAL_INTLEVEL5_MASK		0x00002000
+#define XCHAL_INTLEVEL6_MASK		0x00000000
+#define XCHAL_INTLEVEL7_MASK		0x00004000
+
+/*  Masks of interrupts at each range 1..n of interrupt levels:  */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK	0x001F80FF
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK	0x001F81FF
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK	0x003F8FFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK	0x003F9FFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK	0x003FBFFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK	0x003FBFFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK	0x003FFFFF
+
+/*  Level of each interrupt:  */
+#define XCHAL_INT0_LEVEL		1
+#define XCHAL_INT1_LEVEL		1
+#define XCHAL_INT2_LEVEL		1
+#define XCHAL_INT3_LEVEL		1
+#define XCHAL_INT4_LEVEL		1
+#define XCHAL_INT5_LEVEL		1
+#define XCHAL_INT6_LEVEL		1
+#define XCHAL_INT7_LEVEL		1
+#define XCHAL_INT8_LEVEL		2
+#define XCHAL_INT9_LEVEL		3
+#define XCHAL_INT10_LEVEL		3
+#define XCHAL_INT11_LEVEL		3
+#define XCHAL_INT12_LEVEL		4
+#define XCHAL_INT13_LEVEL		5
+#define XCHAL_INT14_LEVEL		7
+#define XCHAL_INT15_LEVEL		1
+#define XCHAL_INT16_LEVEL		1
+#define XCHAL_INT17_LEVEL		1
+#define XCHAL_INT18_LEVEL		1
+#define XCHAL_INT19_LEVEL		1
+#define XCHAL_INT20_LEVEL		1
+#define XCHAL_INT21_LEVEL		3
+#define XCHAL_DEBUGLEVEL		6	/* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT	1	/* OCD external db interrupt */
+#define XCHAL_NMILEVEL			7	/* NMI "level" (for use with
+						   EXCSAVE/EPS/EPC_n, RFI n) */
+
+/*  Type of each interrupt:  */
+#define XCHAL_INT0_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT3_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT7_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT8_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT9_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT10_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT11_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT12_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT13_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT14_TYPE 	XTHAL_INTTYPE_NMI
+#define XCHAL_INT15_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT16_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT17_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT18_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT19_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT20_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT21_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+
+/*  Masks of interrupts for each type of interrupt:  */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED	0xFFC00000
+#define XCHAL_INTTYPE_MASK_SOFTWARE	0x00000880
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE	0x003F8000
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL	0x0000133F
+#define XCHAL_INTTYPE_MASK_TIMER	0x00002440
+#define XCHAL_INTTYPE_MASK_NMI		0x00004000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR	0x00000000
+
+/*  Interrupt numbers assigned to specific interrupt sources:  */
+#define XCHAL_TIMER0_INTERRUPT		6	/* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT		10	/* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT		13	/* CCOMPARE2 */
+#define XCHAL_TIMER3_INTERRUPT		XTHAL_TIMER_UNCONFIGURED
+#define XCHAL_NMI_INTERRUPT		14	/* non-maskable interrupt */
+
+/*  Interrupt numbers for levels at which only one interrupt is configured:  */
+#define XCHAL_INTLEVEL2_NUM		8
+#define XCHAL_INTLEVEL4_NUM		12
+#define XCHAL_INTLEVEL5_NUM		13
+#define XCHAL_INTLEVEL7_NUM		14
+/*  (There are many interrupts each at level(s) 1, 3.)  */
+
+
+/*
+ *  External interrupt vectors/levels.
+ *  These macros describe how Xtensa processor interrupt numbers
+ *  (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ *  map to external BInterrupt<n> pins, for those interrupts
+ *  configured as external (level-triggered, edge-triggered, or NMI).
+ *  See the Xtensa processor databook for more details.
+ */
+
+/*  Core interrupt numbers mapped to each EXTERNAL interrupt number:  */
+#define XCHAL_EXTINT0_NUM		0	/* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM		1	/* (intlevel 1) */
+#define XCHAL_EXTINT2_NUM		2	/* (intlevel 1) */
+#define XCHAL_EXTINT3_NUM		3	/* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM		4	/* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM		5	/* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM		8	/* (intlevel 2) */
+#define XCHAL_EXTINT7_NUM		9	/* (intlevel 3) */
+#define XCHAL_EXTINT8_NUM		12	/* (intlevel 4) */
+#define XCHAL_EXTINT9_NUM		14	/* (intlevel 7) */
+#define XCHAL_EXTINT10_NUM		15	/* (intlevel 1) */
+#define XCHAL_EXTINT11_NUM		16	/* (intlevel 1) */
+#define XCHAL_EXTINT12_NUM		17	/* (intlevel 1) */
+#define XCHAL_EXTINT13_NUM		18	/* (intlevel 1) */
+#define XCHAL_EXTINT14_NUM		19	/* (intlevel 1) */
+#define XCHAL_EXTINT15_NUM		20	/* (intlevel 1) */
+#define XCHAL_EXTINT16_NUM		21	/* (intlevel 3) */
+
+
+/*----------------------------------------------------------------------
+			EXCEPTIONS and VECTORS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION		2	/* Xtensa Exception Architecture
+						   number: 1 == XEA1 (old)
+							   2 == XEA2 (new)
+							   0 == XEAX (extern) */
+#define XCHAL_HAVE_XEA1			0	/* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2			1	/* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX			0	/* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS		1	/* exception option */
+#define XCHAL_HAVE_MEM_ECC_PARITY	0	/* local memory ECC/parity */
+#define XCHAL_HAVE_VECTOR_SELECT	1	/* relocatable vectors */
+#define XCHAL_HAVE_VECBASE		1	/* relocatable vectors */
+#define XCHAL_VECBASE_RESET_VADDR	0xD0000000  /* VECBASE reset value */
+#define XCHAL_VECBASE_RESET_PADDR	0x00000000
+#define XCHAL_RESET_VECBASE_OVERLAP	0
+
+#define XCHAL_RESET_VECTOR0_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR0_PADDR	0xFE000000
+#define XCHAL_RESET_VECTOR1_VADDR	0xD8000500
+#define XCHAL_RESET_VECTOR1_PADDR	0x00000500
+#define XCHAL_RESET_VECTOR_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR_PADDR	0xFE000000
+#define XCHAL_USER_VECOFS		0x00000340
+#define XCHAL_USER_VECTOR_VADDR		0xD0000340
+#define XCHAL_USER_VECTOR_PADDR		0x00000340
+#define XCHAL_KERNEL_VECOFS		0x00000300
+#define XCHAL_KERNEL_VECTOR_VADDR	0xD0000300
+#define XCHAL_KERNEL_VECTOR_PADDR	0x00000300
+#define XCHAL_DOUBLEEXC_VECOFS		0x000003C0
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR	0xD00003C0
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR	0x000003C0
+#define XCHAL_WINDOW_OF4_VECOFS		0x00000000
+#define XCHAL_WINDOW_UF4_VECOFS		0x00000040
+#define XCHAL_WINDOW_OF8_VECOFS		0x00000080
+#define XCHAL_WINDOW_UF8_VECOFS		0x000000C0
+#define XCHAL_WINDOW_OF12_VECOFS	0x00000100
+#define XCHAL_WINDOW_UF12_VECOFS	0x00000140
+#define XCHAL_WINDOW_VECTORS_VADDR	0xD0000000
+#define XCHAL_WINDOW_VECTORS_PADDR	0x00000000
+#define XCHAL_INTLEVEL2_VECOFS		0x00000180
+#define XCHAL_INTLEVEL2_VECTOR_VADDR	0xD0000180
+#define XCHAL_INTLEVEL2_VECTOR_PADDR	0x00000180
+#define XCHAL_INTLEVEL3_VECOFS		0x000001C0
+#define XCHAL_INTLEVEL3_VECTOR_VADDR	0xD00001C0
+#define XCHAL_INTLEVEL3_VECTOR_PADDR	0x000001C0
+#define XCHAL_INTLEVEL4_VECOFS		0x00000200
+#define XCHAL_INTLEVEL4_VECTOR_VADDR	0xD0000200
+#define XCHAL_INTLEVEL4_VECTOR_PADDR	0x00000200
+#define XCHAL_INTLEVEL5_VECOFS		0x00000240
+#define XCHAL_INTLEVEL5_VECTOR_VADDR	0xD0000240
+#define XCHAL_INTLEVEL5_VECTOR_PADDR	0x00000240
+#define XCHAL_INTLEVEL6_VECOFS		0x00000280
+#define XCHAL_INTLEVEL6_VECTOR_VADDR	0xD0000280
+#define XCHAL_INTLEVEL6_VECTOR_PADDR	0x00000280
+#define XCHAL_DEBUG_VECOFS		XCHAL_INTLEVEL6_VECOFS
+#define XCHAL_DEBUG_VECTOR_VADDR	XCHAL_INTLEVEL6_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR	XCHAL_INTLEVEL6_VECTOR_PADDR
+#define XCHAL_NMI_VECOFS		0x000002C0
+#define XCHAL_NMI_VECTOR_VADDR		0xD00002C0
+#define XCHAL_NMI_VECTOR_PADDR		0x000002C0
+#define XCHAL_INTLEVEL7_VECOFS		XCHAL_NMI_VECOFS
+#define XCHAL_INTLEVEL7_VECTOR_VADDR	XCHAL_NMI_VECTOR_VADDR
+#define XCHAL_INTLEVEL7_VECTOR_PADDR	XCHAL_NMI_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+				DEBUG
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_OCD			1	/* OnChipDebug option */
+#define XCHAL_NUM_IBREAK		2	/* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK		2	/* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY	1	/* faster OCD option */
+
+
+/*----------------------------------------------------------------------
+				MMU
+  ----------------------------------------------------------------------*/
+
+/*  See core-matmap.h header file for more details.  */
+
+#define XCHAL_HAVE_TLBS			1	/* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY		0	/* one way maps I+D 4GB vaddr */
+#define XCHAL_HAVE_IDENTITY_MAP		0	/* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR		0	/* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR	0	/* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR	0	/* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU		1	/* full MMU (with page table
+						   [autorefill] and protection)
+						   usable for an MMU-based OS */
+/*  If none of the above last 4 are set, it's a custom TLB configuration.  */
+#define XCHAL_ITLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+#define XCHAL_DTLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+
+#define XCHAL_MMU_ASID_BITS		8	/* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS			4	/* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS		2	/* num of bits in RING field */
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
+