Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 470 insertions, 0 deletions

diff --git a/block/opal_proto.h b/block/opal_proto.h
new file mode 100644
index 000000000..7152aa1f1
--- /dev/null
+++ b/block/opal_proto.h
@@ -0,0 +1,470 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Authors:
+ *    Rafael Antognolli <rafael.antognolli@intel.com>
+ *    Scott  Bauer      <scott.bauer@intel.com>
+ */
+#include <linux/types.h>
+
+#ifndef _OPAL_PROTO_H
+#define _OPAL_PROTO_H
+
+/*
+ * These constant values come from:
+ * SPC-4 section
+ * 6.30 SECURITY PROTOCOL IN command / table 265.
+ */
+enum {
+	TCG_SECP_00 = 0,
+	TCG_SECP_01,
+};
+
+/*
+ * Token defs derived from:
+ * TCG_Storage_Architecture_Core_Spec_v2.01_r1.00
+ * 3.2.2 Data Stream Encoding
+ */
+enum opal_response_token {
+	OPAL_DTA_TOKENID_BYTESTRING = 0xe0,
+	OPAL_DTA_TOKENID_SINT = 0xe1,
+	OPAL_DTA_TOKENID_UINT = 0xe2,
+	OPAL_DTA_TOKENID_TOKEN = 0xe3, /* actual token is returned */
+	OPAL_DTA_TOKENID_INVALID = 0X0
+};
+
+#define DTAERROR_NO_METHOD_STATUS 0x89
+#define GENERIC_HOST_SESSION_NUM 0x41
+#define FIRST_TPER_SESSION_NUM	4096
+
+#define TPER_SYNC_SUPPORTED 0x01
+/* FC_LOCKING features */
+#define LOCKING_SUPPORTED_MASK 0x01
+#define LOCKING_ENABLED_MASK 0x02
+#define LOCKED_MASK 0x04
+#define MBR_ENABLED_MASK 0x10
+#define MBR_DONE_MASK 0x20
+
+#define TINY_ATOM_DATA_MASK 0x3F
+#define TINY_ATOM_SIGNED 0x40
+
+#define SHORT_ATOM_ID 0x80
+#define SHORT_ATOM_BYTESTRING 0x20
+#define SHORT_ATOM_SIGNED 0x10
+#define SHORT_ATOM_LEN_MASK 0xF
+
+#define MEDIUM_ATOM_ID 0xC0
+#define MEDIUM_ATOM_BYTESTRING 0x10
+#define MEDIUM_ATOM_SIGNED 0x8
+#define MEDIUM_ATOM_LEN_MASK 0x7
+
+#define LONG_ATOM_ID 0xe0
+#define LONG_ATOM_BYTESTRING 0x2
+#define LONG_ATOM_SIGNED 0x1
+
+/* Derived from TCG Core spec 2.01 Section:
+ * 3.2.2.1
+ * Data Type
+ */
+#define TINY_ATOM_BYTE   0x7F
+#define SHORT_ATOM_BYTE  0xBF
+#define MEDIUM_ATOM_BYTE 0xDF
+#define LONG_ATOM_BYTE   0xE3
+
+#define OPAL_INVAL_PARAM 12
+#define OPAL_MANUFACTURED_INACTIVE 0x08
+#define OPAL_DISCOVERY_COMID 0x0001
+
+#define LOCKING_RANGE_NON_GLOBAL 0x03
+/*
+ * User IDs used in the TCG storage SSCs
+ * Derived from: TCG_Storage_Architecture_Core_Spec_v2.01_r1.00
+ * Section: 6.3 Assigned UIDs
+ */
+#define OPAL_METHOD_LENGTH 8
+#define OPAL_MSID_KEYLEN 15
+#define OPAL_UID_LENGTH_HALF 4
+
+/* Enum to index OPALUID array */
+enum opal_uid {
+	/* users */
+	OPAL_SMUID_UID,
+	OPAL_THISSP_UID,
+	OPAL_ADMINSP_UID,
+	OPAL_LOCKINGSP_UID,
+	OPAL_ENTERPRISE_LOCKINGSP_UID,
+	OPAL_ANYBODY_UID,
+	OPAL_SID_UID,
+	OPAL_ADMIN1_UID,
+	OPAL_USER1_UID,
+	OPAL_USER2_UID,
+	OPAL_PSID_UID,
+	OPAL_ENTERPRISE_BANDMASTER0_UID,
+	OPAL_ENTERPRISE_ERASEMASTER_UID,
+	/* tables */
+	OPAL_TABLE_TABLE,
+	OPAL_LOCKINGRANGE_GLOBAL,
+	OPAL_LOCKINGRANGE_ACE_RDLOCKED,
+	OPAL_LOCKINGRANGE_ACE_WRLOCKED,
+	OPAL_MBRCONTROL,
+	OPAL_MBR,
+	OPAL_AUTHORITY_TABLE,
+	OPAL_C_PIN_TABLE,
+	OPAL_LOCKING_INFO_TABLE,
+	OPAL_ENTERPRISE_LOCKING_INFO_TABLE,
+	OPAL_DATASTORE,
+	/* C_PIN_TABLE object ID's */
+	OPAL_C_PIN_MSID,
+	OPAL_C_PIN_SID,
+	OPAL_C_PIN_ADMIN1,
+	/* half UID's (only first 4 bytes used) */
+	OPAL_HALF_UID_AUTHORITY_OBJ_REF,
+	OPAL_HALF_UID_BOOLEAN_ACE,
+	/* omitted optional parameter */
+	OPAL_UID_HEXFF,
+};
+
+/* Enum for indexing the OPALMETHOD array */
+enum opal_method {
+	OPAL_PROPERTIES,
+	OPAL_STARTSESSION,
+	OPAL_REVERT,
+	OPAL_ACTIVATE,
+	OPAL_EGET,
+	OPAL_ESET,
+	OPAL_NEXT,
+	OPAL_EAUTHENTICATE,
+	OPAL_GETACL,
+	OPAL_GENKEY,
+	OPAL_REVERTSP,
+	OPAL_GET,
+	OPAL_SET,
+	OPAL_AUTHENTICATE,
+	OPAL_RANDOM,
+	OPAL_ERASE,
+};
+
+enum opal_token {
+	/* Boolean */
+	OPAL_TRUE = 0x01,
+	OPAL_FALSE = 0x00,
+	OPAL_BOOLEAN_EXPR = 0x03,
+	/* cellblocks */
+	OPAL_TABLE = 0x00,
+	OPAL_STARTROW = 0x01,
+	OPAL_ENDROW = 0x02,
+	OPAL_STARTCOLUMN = 0x03,
+	OPAL_ENDCOLUMN = 0x04,
+	OPAL_VALUES = 0x01,
+	/* table table */
+	OPAL_TABLE_UID = 0x00,
+	OPAL_TABLE_NAME = 0x01,
+	OPAL_TABLE_COMMON = 0x02,
+	OPAL_TABLE_TEMPLATE = 0x03,
+	OPAL_TABLE_KIND = 0x04,
+	OPAL_TABLE_COLUMN = 0x05,
+	OPAL_TABLE_COLUMNS = 0x06,
+	OPAL_TABLE_ROWS = 0x07,
+	OPAL_TABLE_ROWS_FREE = 0x08,
+	OPAL_TABLE_ROW_BYTES = 0x09,
+	OPAL_TABLE_LASTID = 0x0A,
+	OPAL_TABLE_MIN = 0x0B,
+	OPAL_TABLE_MAX = 0x0C,
+	/* authority table */
+	OPAL_PIN = 0x03,
+	/* locking tokens */
+	OPAL_RANGESTART = 0x03,
+	OPAL_RANGELENGTH = 0x04,
+	OPAL_READLOCKENABLED = 0x05,
+	OPAL_WRITELOCKENABLED = 0x06,
+	OPAL_READLOCKED = 0x07,
+	OPAL_WRITELOCKED = 0x08,
+	OPAL_ACTIVEKEY = 0x0A,
+	/* lockingsp table */
+	OPAL_LIFECYCLE = 0x06,
+	/* locking info table */
+	OPAL_MAXRANGES = 0x04,
+	/* mbr control */
+	OPAL_MBRENABLE = 0x01,
+	OPAL_MBRDONE = 0x02,
+	/* properties */
+	OPAL_HOSTPROPERTIES = 0x00,
+	/* atoms */
+	OPAL_STARTLIST = 0xf0,
+	OPAL_ENDLIST = 0xf1,
+	OPAL_STARTNAME = 0xf2,
+	OPAL_ENDNAME = 0xf3,
+	OPAL_CALL = 0xf8,
+	OPAL_ENDOFDATA = 0xf9,
+	OPAL_ENDOFSESSION = 0xfa,
+	OPAL_STARTTRANSACTON = 0xfb,
+	OPAL_ENDTRANSACTON = 0xfC,
+	OPAL_EMPTYATOM = 0xff,
+	OPAL_WHERE = 0x00,
+};
+
+/* Locking state for a locking range */
+enum opal_lockingstate {
+	OPAL_LOCKING_READWRITE = 0x01,
+	OPAL_LOCKING_READONLY = 0x02,
+	OPAL_LOCKING_LOCKED = 0x03,
+};
+
+enum opal_parameter {
+	OPAL_SUM_SET_LIST = 0x060000,
+};
+
+/* Packets derived from:
+ * TCG_Storage_Architecture_Core_Spec_v2.01_r1.00
+ * Secion: 3.2.3 ComPackets, Packets & Subpackets
+ */
+
+/* Comm Packet (header) for transmissions. */
+struct opal_compacket {
+	__be32 reserved0;
+	u8 extendedComID[4];
+	__be32 outstandingData;
+	__be32 minTransfer;
+	__be32 length;
+};
+
+/* Packet structure. */
+struct opal_packet {
+	__be32 tsn;
+	__be32 hsn;
+	__be32 seq_number;
+	__be16 reserved0;
+	__be16 ack_type;
+	__be32 acknowledgment;
+	__be32 length;
+};
+
+/* Data sub packet header */
+struct opal_data_subpacket {
+	u8 reserved0[6];
+	__be16 kind;
+	__be32 length;
+};
+
+/* header of a response */
+struct opal_header {
+	struct opal_compacket cp;
+	struct opal_packet pkt;
+	struct opal_data_subpacket subpkt;
+};
+
+#define FC_TPER       0x0001
+#define FC_LOCKING    0x0002
+#define FC_GEOMETRY   0x0003
+#define FC_ENTERPRISE 0x0100
+#define FC_DATASTORE  0x0202
+#define FC_SINGLEUSER 0x0201
+#define FC_OPALV100   0x0200
+#define FC_OPALV200   0x0203
+
+/*
+ * The Discovery 0 Header. As defined in
+ * Opal SSC Documentation
+ * Section: 3.3.5 Capability Discovery
+ */
+struct d0_header {
+	__be32 length; /* the length of the header 48 in 2.00.100 */
+	__be32 revision; /**< revision of the header 1 in 2.00.100 */
+	__be32 reserved01;
+	__be32 reserved02;
+	/*
+	 * the remainder of the structure is vendor specific and will not be
+	 * addressed now
+	 */
+	u8 ignored[32];
+};
+
+/*
+ * TPer Feature Descriptor. Contains flags indicating support for the
+ * TPer features described in the OPAL specification. The names match the
+ * OPAL terminology
+ *
+ * code == 0x001 in 2.00.100
+ */
+struct d0_tper_features {
+	/*
+	 * supported_features bits:
+	 * bit 7: reserved
+	 * bit 6: com ID management
+	 * bit 5: reserved
+	 * bit 4: streaming support
+	 * bit 3: buffer management
+	 * bit 2: ACK/NACK
+	 * bit 1: async
+	 * bit 0: sync
+	 */
+	u8 supported_features;
+	/*
+	 * bytes 5 through 15 are reserved, but we represent the first 3 as
+	 * u8 to keep the other two 32bits integers aligned.
+	 */
+	u8 reserved01[3];
+	__be32 reserved02;
+	__be32 reserved03;
+};
+
+/*
+ * Locking Feature Descriptor. Contains flags indicating support for the
+ * locking features described in the OPAL specification. The names match the
+ * OPAL terminology
+ *
+ * code == 0x0002 in 2.00.100
+ */
+struct d0_locking_features {
+	/*
+	 * supported_features bits:
+	 * bits 6-7: reserved
+	 * bit 5: MBR done
+	 * bit 4: MBR enabled
+	 * bit 3: media encryption
+	 * bit 2: locked
+	 * bit 1: locking enabled
+	 * bit 0: locking supported
+	 */
+	u8 supported_features;
+	/*
+	 * bytes 5 through 15 are reserved, but we represent the first 3 as
+	 * u8 to keep the other two 32bits integers aligned.
+	 */
+	u8 reserved01[3];
+	__be32 reserved02;
+	__be32 reserved03;
+};
+
+/*
+ * Geometry Feature Descriptor. Contains flags indicating support for the
+ * geometry features described in the OPAL specification. The names match the
+ * OPAL terminology
+ *
+ * code == 0x0003 in 2.00.100
+ */
+struct d0_geometry_features {
+	/*
+	 * skip 32 bits from header, needed to align the struct to 64 bits.
+	 */
+	u8 header[4];
+	/*
+	 * reserved01:
+	 * bits 1-6: reserved
+	 * bit 0: align
+	 */
+	u8 reserved01;
+	u8 reserved02[7];
+	__be32 logical_block_size;
+	__be64 alignment_granularity;
+	__be64 lowest_aligned_lba;
+};
+
+/*
+ * Enterprise SSC Feature
+ *
+ * code == 0x0100
+ */
+struct d0_enterprise_ssc {
+	__be16 baseComID;
+	__be16 numComIDs;
+	/* range_crossing:
+	 * bits 1-6: reserved
+	 * bit 0: range crossing
+	 */
+	u8 range_crossing;
+	u8 reserved01;
+	__be16 reserved02;
+	__be32 reserved03;
+	__be32 reserved04;
+};
+
+/*
+ * Opal V1 feature
+ *
+ * code == 0x0200
+ */
+struct d0_opal_v100 {
+	__be16 baseComID;
+	__be16 numComIDs;
+};
+
+/*
+ * Single User Mode feature
+ *
+ * code == 0x0201
+ */
+struct d0_single_user_mode {
+	__be32 num_locking_objects;
+	/* reserved01:
+	 * bit 0: any
+	 * bit 1: all
+	 * bit 2: policy
+	 * bits 3-7: reserved
+	 */
+	u8 reserved01;
+	u8 reserved02;
+	__be16 reserved03;
+	__be32 reserved04;
+};
+
+/*
+ * Additonal Datastores feature
+ *
+ * code == 0x0202
+ */
+struct d0_datastore_table {
+	__be16 reserved01;
+	__be16 max_tables;
+	__be32 max_size_tables;
+	__be32 table_size_alignment;
+};
+
+/*
+ * OPAL 2.0 feature
+ *
+ * code == 0x0203
+ */
+struct d0_opal_v200 {
+	__be16 baseComID;
+	__be16 numComIDs;
+	/* range_crossing:
+	 * bits 1-6: reserved
+	 * bit 0: range crossing
+	 */
+	u8 range_crossing;
+	/* num_locking_admin_auth:
+	 * not aligned to 16 bits, so use two u8.
+	 * stored in big endian:
+	 * 0: MSB
+	 * 1: LSB
+	 */
+	u8 num_locking_admin_auth[2];
+	/* num_locking_user_auth:
+	 * not aligned to 16 bits, so use two u8.
+	 * stored in big endian:
+	 * 0: MSB
+	 * 1: LSB
+	 */
+	u8 num_locking_user_auth[2];
+	u8 initialPIN;
+	u8 revertedPIN;
+	u8 reserved01;
+	__be32 reserved02;
+};
+
+/* Union of features used to parse the discovery 0 response */
+struct d0_features {
+	__be16 code;
+	/*
+	 * r_version bits:
+	 * bits 4-7: version
+	 * bits 0-3: reserved
+	 */
+	u8 r_version;
+	u8 length;
+	u8 features[];
+};
+
+#endif /* _OPAL_PROTO_H */