Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 259 insertions, 0 deletions

diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
new file mode 100644
index 000000000..3bbe2276c
--- /dev/null
+++ b/drivers/acpi/acpi_apd.c
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AMD ACPI support for ACPI2platform device.
+ *
+ * Copyright (c) 2014,2015 AMD Corporation.
+ * Authors: Ken Xue <Ken.Xue@amd.com>
+ *	Wu, Jeff <Jeff.Wu@amd.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_data/clk-fch.h>
+#include <linux/platform_device.h>
+
+#include "internal.h"
+
+struct apd_private_data;
+
+/**
+ * struct apd_device_desc - a descriptor for apd device
+ * @fixed_clk_rate: fixed rate input clock source for acpi device;
+ *			0 means no fixed rate input clock source
+ * @properties: build-in properties of the device such as UART
+ * @setup: a hook routine to set device resource during create platform device
+ *
+ * Device description defined as acpi_device_id.driver_data
+ */
+struct apd_device_desc {
+	unsigned int fixed_clk_rate;
+	struct property_entry *properties;
+	int (*setup)(struct apd_private_data *pdata);
+};
+
+struct apd_private_data {
+	struct clk *clk;
+	struct acpi_device *adev;
+	const struct apd_device_desc *dev_desc;
+};
+
+#if defined(CONFIG_X86_AMD_PLATFORM_DEVICE) || defined(CONFIG_ARM64)
+#define APD_ADDR(desc)	((unsigned long)&desc)
+
+static int acpi_apd_setup(struct apd_private_data *pdata)
+{
+	const struct apd_device_desc *dev_desc = pdata->dev_desc;
+	struct clk *clk;
+
+	if (dev_desc->fixed_clk_rate) {
+		clk = clk_register_fixed_rate(&pdata->adev->dev,
+					dev_name(&pdata->adev->dev),
+					NULL, 0, dev_desc->fixed_clk_rate);
+		clk_register_clkdev(clk, NULL, dev_name(&pdata->adev->dev));
+		pdata->clk = clk;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
+
+static int fch_misc_setup(struct apd_private_data *pdata)
+{
+	struct acpi_device *adev = pdata->adev;
+	const union acpi_object *obj;
+	struct platform_device *clkdev;
+	struct fch_clk_data *clk_data;
+	struct resource_entry *rentry;
+	struct list_head resource_list;
+	int ret;
+
+	clk_data = devm_kzalloc(&adev->dev, sizeof(*clk_data), GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_memory_resources(adev, &resource_list);
+	if (ret < 0)
+		return -ENOENT;
+
+	if (!acpi_dev_get_property(adev, "clk-name", ACPI_TYPE_STRING, &obj)) {
+		clk_data->name = devm_kzalloc(&adev->dev, obj->string.length,
+					      GFP_KERNEL);
+
+		strcpy(clk_data->name, obj->string.pointer);
+	} else {
+		/* Set default name to mclk if entry missing in firmware */
+		clk_data->name = "mclk";
+	}
+
+	list_for_each_entry(rentry, &resource_list, node) {
+		clk_data->base = devm_ioremap(&adev->dev, rentry->res->start,
+					      resource_size(rentry->res));
+		break;
+	}
+	if (!clk_data->base)
+		return -ENOMEM;
+
+	acpi_dev_free_resource_list(&resource_list);
+
+	clkdev = platform_device_register_data(&adev->dev, "clk-fch",
+					       PLATFORM_DEVID_NONE, clk_data,
+					       sizeof(*clk_data));
+	return PTR_ERR_OR_ZERO(clkdev);
+}
+
+static const struct apd_device_desc cz_i2c_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 133000000,
+};
+
+static const struct apd_device_desc wt_i2c_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 150000000,
+};
+
+static struct property_entry uart_properties[] = {
+	PROPERTY_ENTRY_U32("reg-io-width", 4),
+	PROPERTY_ENTRY_U32("reg-shift", 2),
+	PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
+	{ },
+};
+
+static const struct apd_device_desc cz_uart_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 48000000,
+	.properties = uart_properties,
+};
+
+static const struct apd_device_desc fch_misc_desc = {
+	.setup = fch_misc_setup,
+};
+#endif /* CONFIG_X86_AMD_PLATFORM_DEVICE */
+
+#ifdef CONFIG_ARM64
+static const struct apd_device_desc xgene_i2c_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 100000000,
+};
+
+static const struct apd_device_desc vulcan_spi_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 133000000,
+};
+
+static const struct apd_device_desc hip07_i2c_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 200000000,
+};
+
+static const struct apd_device_desc hip08_i2c_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 250000000,
+};
+
+static const struct apd_device_desc hip08_lite_i2c_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 125000000,
+};
+
+static const struct apd_device_desc thunderx2_i2c_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 125000000,
+};
+
+static const struct apd_device_desc nxp_i2c_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 350000000,
+};
+
+static const struct apd_device_desc hip08_spi_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 250000000,
+};
+#endif /* CONFIG_ARM64 */
+
+#endif
+
+/*
+ * Create platform device during acpi scan attach handle.
+ * Return value > 0 on success of creating device.
+ */
+static int acpi_apd_create_device(struct acpi_device *adev,
+				   const struct acpi_device_id *id)
+{
+	const struct apd_device_desc *dev_desc = (void *)id->driver_data;
+	struct apd_private_data *pdata;
+	struct platform_device *pdev;
+	int ret;
+
+	if (!dev_desc) {
+		pdev = acpi_create_platform_device(adev, NULL);
+		return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1;
+	}
+
+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->adev = adev;
+	pdata->dev_desc = dev_desc;
+
+	if (dev_desc->setup) {
+		ret = dev_desc->setup(pdata);
+		if (ret)
+			goto err_out;
+	}
+
+	adev->driver_data = pdata;
+	pdev = acpi_create_platform_device(adev, dev_desc->properties);
+	if (!IS_ERR_OR_NULL(pdev))
+		return 1;
+
+	ret = PTR_ERR(pdev);
+	adev->driver_data = NULL;
+
+ err_out:
+	kfree(pdata);
+	return ret;
+}
+
+static const struct acpi_device_id acpi_apd_device_ids[] = {
+	/* Generic apd devices */
+#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
+	{ "AMD0010", APD_ADDR(cz_i2c_desc) },
+	{ "AMD0020", APD_ADDR(cz_uart_desc) },
+	{ "AMD0030", },
+	{ "AMD0040", APD_ADDR(fch_misc_desc)},
+	{ "AMDI0010", APD_ADDR(wt_i2c_desc) },
+	{ "AMDI0019", APD_ADDR(wt_i2c_desc) },
+	{ "AMDI0020", APD_ADDR(cz_uart_desc) },
+	{ "AMDI0022", APD_ADDR(cz_uart_desc) },
+	{ "HYGO0010", APD_ADDR(wt_i2c_desc) },
+#endif
+#ifdef CONFIG_ARM64
+	{ "APMC0D0F", APD_ADDR(xgene_i2c_desc) },
+	{ "BRCM900D", APD_ADDR(vulcan_spi_desc) },
+	{ "CAV900D",  APD_ADDR(vulcan_spi_desc) },
+	{ "CAV9007",  APD_ADDR(thunderx2_i2c_desc) },
+	{ "HISI02A1", APD_ADDR(hip07_i2c_desc) },
+	{ "HISI02A2", APD_ADDR(hip08_i2c_desc) },
+	{ "HISI02A3", APD_ADDR(hip08_lite_i2c_desc) },
+	{ "HISI0173", APD_ADDR(hip08_spi_desc) },
+	{ "NXP0001", APD_ADDR(nxp_i2c_desc) },
+#endif
+	{ }
+};
+
+static struct acpi_scan_handler apd_handler = {
+	.ids = acpi_apd_device_ids,
+	.attach = acpi_apd_create_device,
+};
+
+void __init acpi_apd_init(void)
+{
+	acpi_scan_add_handler(&apd_handler);
+}