Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 363 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/exserial.c b/drivers/acpi/acpica/exserial.c
new file mode 100644
index 000000000..fd63f2042
--- /dev/null
+++ b/drivers/acpi/acpica/exserial.c
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/******************************************************************************
+ *
+ * Module Name: exserial - field_unit support for serial address spaces
+ *
+ * Copyright (C) 2000 - 2022, Intel Corp.
+ *
+ *****************************************************************************/
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acdispat.h"
+#include "acinterp.h"
+#include "amlcode.h"
+
+#define _COMPONENT          ACPI_EXECUTER
+ACPI_MODULE_NAME("exserial")
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_read_gpio
+ *
+ * PARAMETERS:  obj_desc            - The named field to read
+ *              buffer              - Where the return data is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Read from a named field that references a Generic Serial Bus
+ *              field
+ *
+ ******************************************************************************/
+acpi_status acpi_ex_read_gpio(union acpi_operand_object *obj_desc, void *buffer)
+{
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE_PTR(ex_read_gpio, obj_desc);
+
+	/*
+	 * For GPIO (general_purpose_io), the Address will be the bit offset
+	 * from the previous Connection() operator, making it effectively a
+	 * pin number index. The bit_length is the length of the field, which
+	 * is thus the number of pins.
+	 */
+	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+			  "GPIO FieldRead [FROM]:  Pin %u Bits %u\n",
+			  obj_desc->field.pin_number_index,
+			  obj_desc->field.bit_length));
+
+	/* Lock entire transaction if requested */
+
+	acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+	/* Perform the read */
+
+	status = acpi_ex_access_region(obj_desc, 0, (u64 *)buffer, ACPI_READ);
+
+	acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_write_gpio
+ *
+ * PARAMETERS:  source_desc         - Contains data to write. Expect to be
+ *                                    an Integer object.
+ *              obj_desc            - The named field
+ *              result_desc         - Where the return value is returned, if any
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Write to a named field that references a General Purpose I/O
+ *              field.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_write_gpio(union acpi_operand_object *source_desc,
+		   union acpi_operand_object *obj_desc,
+		   union acpi_operand_object **return_buffer)
+{
+	acpi_status status;
+	void *buffer;
+
+	ACPI_FUNCTION_TRACE_PTR(ex_write_gpio, obj_desc);
+
+	/*
+	 * For GPIO (general_purpose_io), we will bypass the entire field
+	 * mechanism and handoff the bit address and bit width directly to
+	 * the handler. The Address will be the bit offset
+	 * from the previous Connection() operator, making it effectively a
+	 * pin number index. The bit_length is the length of the field, which
+	 * is thus the number of pins.
+	 */
+	if (source_desc->common.type != ACPI_TYPE_INTEGER) {
+		return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+			  "GPIO FieldWrite [FROM]: (%s:%X), Value %.8X  [TO]: Pin %u Bits %u\n",
+			  acpi_ut_get_type_name(source_desc->common.type),
+			  source_desc->common.type,
+			  (u32)source_desc->integer.value,
+			  obj_desc->field.pin_number_index,
+			  obj_desc->field.bit_length));
+
+	buffer = &source_desc->integer.value;
+
+	/* Lock entire transaction if requested */
+
+	acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+	/* Perform the write */
+
+	status = acpi_ex_access_region(obj_desc, 0, (u64 *)buffer, ACPI_WRITE);
+	acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_read_serial_bus
+ *
+ * PARAMETERS:  obj_desc            - The named field to read
+ *              return_buffer       - Where the return value is returned, if any
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Read from a named field that references a serial bus
+ *              (SMBus, IPMI, or GSBus).
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_read_serial_bus(union acpi_operand_object *obj_desc,
+			union acpi_operand_object **return_buffer)
+{
+	acpi_status status;
+	u32 buffer_length;
+	union acpi_operand_object *buffer_desc;
+	u32 function;
+	u16 accessor_type;
+
+	ACPI_FUNCTION_TRACE_PTR(ex_read_serial_bus, obj_desc);
+
+	/*
+	 * This is an SMBus, GSBus or IPMI read. We must create a buffer to
+	 * hold the data and then directly access the region handler.
+	 *
+	 * Note: SMBus and GSBus protocol value is passed in upper 16-bits
+	 * of Function
+	 *
+	 * Common buffer format:
+	 *     Status;    (Byte 0 of the data buffer)
+	 *     Length;    (Byte 1 of the data buffer)
+	 *     Data[x-1]: (Bytes 2-x of the arbitrary length data buffer)
+	 */
+	switch (obj_desc->field.region_obj->region.space_id) {
+	case ACPI_ADR_SPACE_SMBUS:
+
+		buffer_length = ACPI_SMBUS_BUFFER_SIZE;
+		function = ACPI_READ | (obj_desc->field.attribute << 16);
+		break;
+
+	case ACPI_ADR_SPACE_IPMI:
+
+		buffer_length = ACPI_IPMI_BUFFER_SIZE;
+		function = ACPI_READ;
+		break;
+
+	case ACPI_ADR_SPACE_GSBUS:
+
+		accessor_type = obj_desc->field.attribute;
+		if (accessor_type == AML_FIELD_ATTRIB_RAW_PROCESS_BYTES) {
+			ACPI_ERROR((AE_INFO,
+				    "Invalid direct read using bidirectional write-then-read protocol"));
+
+			return_ACPI_STATUS(AE_AML_PROTOCOL);
+		}
+
+		status =
+		    acpi_ex_get_protocol_buffer_length(accessor_type,
+						       &buffer_length);
+		if (ACPI_FAILURE(status)) {
+			ACPI_ERROR((AE_INFO,
+				    "Invalid protocol ID for GSBus: 0x%4.4X",
+				    accessor_type));
+
+			return_ACPI_STATUS(status);
+		}
+
+		/* Add header length to get the full size of the buffer */
+
+		buffer_length += ACPI_SERIAL_HEADER_SIZE;
+		function = ACPI_READ | (accessor_type << 16);
+		break;
+
+	case ACPI_ADR_SPACE_PLATFORM_RT:
+
+		buffer_length = ACPI_PRM_INPUT_BUFFER_SIZE;
+		function = ACPI_READ;
+		break;
+
+	default:
+		return_ACPI_STATUS(AE_AML_INVALID_SPACE_ID);
+	}
+
+	/* Create the local transfer buffer that is returned to the caller */
+
+	buffer_desc = acpi_ut_create_buffer_object(buffer_length);
+	if (!buffer_desc) {
+		return_ACPI_STATUS(AE_NO_MEMORY);
+	}
+
+	/* Lock entire transaction if requested */
+
+	acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+	/* Call the region handler for the write-then-read */
+
+	status = acpi_ex_access_region(obj_desc, 0,
+				       ACPI_CAST_PTR(u64,
+						     buffer_desc->buffer.
+						     pointer), function);
+	acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+
+	*return_buffer = buffer_desc;
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_write_serial_bus
+ *
+ * PARAMETERS:  source_desc         - Contains data to write
+ *              obj_desc            - The named field
+ *              return_buffer       - Where the return value is returned, if any
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Write to a named field that references a serial bus
+ *              (SMBus, IPMI, GSBus).
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_write_serial_bus(union acpi_operand_object *source_desc,
+			 union acpi_operand_object *obj_desc,
+			 union acpi_operand_object **return_buffer)
+{
+	acpi_status status;
+	u32 buffer_length;
+	u32 data_length;
+	void *buffer;
+	union acpi_operand_object *buffer_desc;
+	u32 function;
+	u16 accessor_type;
+
+	ACPI_FUNCTION_TRACE_PTR(ex_write_serial_bus, obj_desc);
+
+	/*
+	 * This is an SMBus, GSBus or IPMI write. We will bypass the entire
+	 * field mechanism and handoff the buffer directly to the handler.
+	 * For these address spaces, the buffer is bidirectional; on a
+	 * write, return data is returned in the same buffer.
+	 *
+	 * Source must be a buffer of sufficient size, these are fixed size:
+	 * ACPI_SMBUS_BUFFER_SIZE, or ACPI_IPMI_BUFFER_SIZE.
+	 *
+	 * Note: SMBus and GSBus protocol type is passed in upper 16-bits
+	 * of Function
+	 *
+	 * Common buffer format:
+	 *     Status;    (Byte 0 of the data buffer)
+	 *     Length;    (Byte 1 of the data buffer)
+	 *     Data[x-1]: (Bytes 2-x of the arbitrary length data buffer)
+	 */
+	if (source_desc->common.type != ACPI_TYPE_BUFFER) {
+		ACPI_ERROR((AE_INFO,
+			    "SMBus/IPMI/GenericSerialBus write requires "
+			    "Buffer, found type %s",
+			    acpi_ut_get_object_type_name(source_desc)));
+
+		return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+	}
+
+	switch (obj_desc->field.region_obj->region.space_id) {
+	case ACPI_ADR_SPACE_SMBUS:
+
+		buffer_length = ACPI_SMBUS_BUFFER_SIZE;
+		function = ACPI_WRITE | (obj_desc->field.attribute << 16);
+		break;
+
+	case ACPI_ADR_SPACE_IPMI:
+
+		buffer_length = ACPI_IPMI_BUFFER_SIZE;
+		function = ACPI_WRITE;
+		break;
+
+	case ACPI_ADR_SPACE_GSBUS:
+
+		accessor_type = obj_desc->field.attribute;
+		status =
+		    acpi_ex_get_protocol_buffer_length(accessor_type,
+						       &buffer_length);
+		if (ACPI_FAILURE(status)) {
+			ACPI_ERROR((AE_INFO,
+				    "Invalid protocol ID for GSBus: 0x%4.4X",
+				    accessor_type));
+
+			return_ACPI_STATUS(status);
+		}
+
+		/* Add header length to get the full size of the buffer */
+
+		buffer_length += ACPI_SERIAL_HEADER_SIZE;
+		function = ACPI_WRITE | (accessor_type << 16);
+		break;
+
+	case ACPI_ADR_SPACE_PLATFORM_RT:
+
+		buffer_length = ACPI_PRM_INPUT_BUFFER_SIZE;
+		function = ACPI_WRITE;
+		break;
+
+	case ACPI_ADR_SPACE_FIXED_HARDWARE:
+
+		buffer_length = ACPI_FFH_INPUT_BUFFER_SIZE;
+		function = ACPI_WRITE;
+		break;
+
+	default:
+		return_ACPI_STATUS(AE_AML_INVALID_SPACE_ID);
+	}
+
+	/* Create the transfer/bidirectional/return buffer */
+
+	buffer_desc = acpi_ut_create_buffer_object(buffer_length);
+	if (!buffer_desc) {
+		return_ACPI_STATUS(AE_NO_MEMORY);
+	}
+
+	/* Copy the input buffer data to the transfer buffer */
+
+	buffer = buffer_desc->buffer.pointer;
+	data_length = (buffer_length < source_desc->buffer.length ?
+		       buffer_length : source_desc->buffer.length);
+	memcpy(buffer, source_desc->buffer.pointer, data_length);
+
+	/* Lock entire transaction if requested */
+
+	acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+	/*
+	 * Perform the write (returns status and perhaps data in the
+	 * same buffer)
+	 */
+	status = acpi_ex_access_region(obj_desc, 0, (u64 *)buffer, function);
+	acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+
+	*return_buffer = buffer_desc;
+	return_ACPI_STATUS(status);
+}