Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 327 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/utstrtoul64.c b/drivers/acpi/acpica/utstrtoul64.c
new file mode 100644
index 000000000..5fde619a8
--- /dev/null
+++ b/drivers/acpi/acpica/utstrtoul64.c
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/*******************************************************************************
+ *
+ * Module Name: utstrtoul64 - String-to-integer conversion support for both
+ *                            64-bit and 32-bit integers
+ *
+ ******************************************************************************/
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#define _COMPONENT          ACPI_UTILITIES
+ACPI_MODULE_NAME("utstrtoul64")
+
+/*******************************************************************************
+ *
+ * This module contains the top-level string to 64/32-bit unsigned integer
+ * conversion functions:
+ *
+ *  1) A standard strtoul() function that supports 64-bit integers, base
+ *     8/10/16, with integer overflow support. This is used mainly by the
+ *     iASL compiler, which implements tighter constraints on integer
+ *     constants than the runtime (interpreter) integer-to-string conversions.
+ *  2) Runtime "Explicit conversion" as defined in the ACPI specification.
+ *  3) Runtime "Implicit conversion" as defined in the ACPI specification.
+ *
+ * Current users of this module:
+ *
+ *  iASL        - Preprocessor (constants and math expressions)
+ *  iASL        - Main parser, conversion of constants to integers
+ *  iASL        - Data Table Compiler parser (constants and math expressions)
+ *  interpreter - Implicit and explicit conversions, GPE method names
+ *  interpreter - Repair code for return values from predefined names
+ *  debugger    - Command line input string conversion
+ *  acpi_dump   - ACPI table physical addresses
+ *  acpi_exec   - Support for namespace overrides
+ *
+ * Notes concerning users of these interfaces:
+ *
+ * acpi_gbl_integer_byte_width is used to set the 32/64 bit limit for explicit
+ * and implicit conversions. This global must be set to the proper width.
+ * For the core ACPICA code, the width depends on the DSDT version. For the
+ * acpi_ut_strtoul64 interface, all conversions are 64 bits. This interface is
+ * used primarily for iASL, where the default width is 64 bits for all parsers,
+ * but error checking is performed later to flag cases where a 64-bit constant
+ * is wrongly defined in a 32-bit DSDT/SSDT.
+ *
+ * In ACPI, the only place where octal numbers are supported is within
+ * the ASL language itself. This is implemented via the main acpi_ut_strtoul64
+ * interface. According the ACPI specification, there is no ACPI runtime
+ * support (explicit/implicit) for octal string conversions.
+ *
+ ******************************************************************************/
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strtoul64
+ *
+ * PARAMETERS:  string                  - Null terminated input string,
+ *                                        must be a valid pointer
+ *              return_value            - Where the converted integer is
+ *                                        returned. Must be a valid pointer
+ *
+ * RETURN:      Status and converted integer. Returns an exception on a
+ *              64-bit numeric overflow
+ *
+ * DESCRIPTION: Convert a string into an unsigned integer. Always performs a
+ *              full 64-bit conversion, regardless of the current global
+ *              integer width. Supports Decimal, Hex, and Octal strings.
+ *
+ * Current users of this function:
+ *
+ *  iASL        - Preprocessor (constants and math expressions)
+ *  iASL        - Main ASL parser, conversion of ASL constants to integers
+ *  iASL        - Data Table Compiler parser (constants and math expressions)
+ *  interpreter - Repair code for return values from predefined names
+ *  acpi_dump   - ACPI table physical addresses
+ *  acpi_exec   - Support for namespace overrides
+ *
+ ******************************************************************************/
+acpi_status acpi_ut_strtoul64(char *string, u64 *return_value)
+{
+	acpi_status status = AE_OK;
+	u8 original_bit_width;
+	u32 base = 10;		/* Default is decimal */
+
+	ACPI_FUNCTION_TRACE_STR(ut_strtoul64, string);
+
+	*return_value = 0;
+
+	/* A NULL return string returns a value of zero */
+
+	if (*string == 0) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	if (!acpi_ut_remove_whitespace(&string)) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/*
+	 * 1) Check for a hex constant. A "0x" prefix indicates base 16.
+	 */
+	if (acpi_ut_detect_hex_prefix(&string)) {
+		base = 16;
+	}
+
+	/*
+	 * 2) Check for an octal constant, defined to be a leading zero
+	 * followed by sequence of octal digits (0-7)
+	 */
+	else if (acpi_ut_detect_octal_prefix(&string)) {
+		base = 8;
+	}
+
+	if (!acpi_ut_remove_leading_zeros(&string)) {
+		return_ACPI_STATUS(AE_OK);	/* Return value 0 */
+	}
+
+	/*
+	 * Force a full 64-bit conversion. The caller (usually iASL) must
+	 * check for a 32-bit overflow later as necessary (If current mode
+	 * is 32-bit, meaning a 32-bit DSDT).
+	 */
+	original_bit_width = acpi_gbl_integer_bit_width;
+	acpi_gbl_integer_bit_width = 64;
+
+	/*
+	 * Perform the base 8, 10, or 16 conversion. A 64-bit numeric overflow
+	 * will return an exception (to allow iASL to flag the statement).
+	 */
+	switch (base) {
+	case 8:
+		status = acpi_ut_convert_octal_string(string, return_value);
+		break;
+
+	case 10:
+		status = acpi_ut_convert_decimal_string(string, return_value);
+		break;
+
+	case 16:
+	default:
+		status = acpi_ut_convert_hex_string(string, return_value);
+		break;
+	}
+
+	/* Only possible exception from above is a 64-bit overflow */
+
+	acpi_gbl_integer_bit_width = original_bit_width;
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_implicit_strtoul64
+ *
+ * PARAMETERS:  string                  - Null terminated input string,
+ *                                        must be a valid pointer
+ *
+ * RETURN:      Converted integer
+ *
+ * DESCRIPTION: Perform a 64-bit conversion with restrictions placed upon
+ *              an "implicit conversion" by the ACPI specification. Used by
+ *              many ASL operators that require an integer operand, and support
+ *              an automatic (implicit) conversion from a string operand
+ *              to the final integer operand. The major restriction is that
+ *              only hex strings are supported.
+ *
+ * -----------------------------------------------------------------------------
+ *
+ * Base is always 16, either with or without the 0x prefix. Decimal and
+ * Octal strings are not supported, as per the ACPI specification.
+ *
+ * Examples (both are hex values):
+ *      Add ("BA98", Arg0, Local0)
+ *      Subtract ("0x12345678", Arg1, Local1)
+ *
+ * Conversion rules as extracted from the ACPI specification:
+ *
+ *  The converted integer is initialized to the value zero.
+ *  The ASCII string is always interpreted as a hexadecimal constant.
+ *
+ *  1)  According to the ACPI specification, a "0x" prefix is not allowed.
+ *      However, ACPICA allows this as an ACPI extension on general
+ *      principle. (NO ERROR)
+ *
+ *  2)  The conversion terminates when the size of an integer is reached
+ *      (32 or 64 bits). There are no numeric overflow conditions. (NO ERROR)
+ *
+ *  3)  The first non-hex character terminates the conversion and returns
+ *      the current accumulated value of the converted integer (NO ERROR).
+ *
+ *  4)  Conversion of a null (zero-length) string to an integer is
+ *      technically not allowed. However, ACPICA allows this as an ACPI
+ *      extension. The conversion returns the value 0. (NO ERROR)
+ *
+ * NOTE: There are no error conditions returned by this function. At
+ * the minimum, a value of zero is returned.
+ *
+ * Current users of this function:
+ *
+ *  interpreter - All runtime implicit conversions, as per ACPI specification
+ *  iASL        - Data Table Compiler parser (constants and math expressions)
+ *
+ ******************************************************************************/
+
+u64 acpi_ut_implicit_strtoul64(char *string)
+{
+	u64 converted_integer = 0;
+
+	ACPI_FUNCTION_TRACE_STR(ut_implicit_strtoul64, string);
+
+	if (!acpi_ut_remove_whitespace(&string)) {
+		return_VALUE(0);
+	}
+
+	/*
+	 * Per the ACPI specification, only hexadecimal is supported for
+	 * implicit conversions, and the "0x" prefix is "not allowed".
+	 * However, allow a "0x" prefix as an ACPI extension.
+	 */
+	acpi_ut_remove_hex_prefix(&string);
+
+	if (!acpi_ut_remove_leading_zeros(&string)) {
+		return_VALUE(0);
+	}
+
+	/*
+	 * Ignore overflow as per the ACPI specification. This is implemented by
+	 * ignoring the return status from the conversion function called below.
+	 * On overflow, the input string is simply truncated.
+	 */
+	acpi_ut_convert_hex_string(string, &converted_integer);
+	return_VALUE(converted_integer);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_explicit_strtoul64
+ *
+ * PARAMETERS:  string                  - Null terminated input string,
+ *                                        must be a valid pointer
+ *
+ * RETURN:      Converted integer
+ *
+ * DESCRIPTION: Perform a 64-bit conversion with the restrictions placed upon
+ *              an "explicit conversion" by the ACPI specification. The
+ *              main restriction is that only hex and decimal are supported.
+ *
+ * -----------------------------------------------------------------------------
+ *
+ * Base is either 10 (default) or 16 (with 0x prefix). Octal (base 8) strings
+ * are not supported, as per the ACPI specification.
+ *
+ * Examples:
+ *      to_integer ("1000")     Decimal
+ *      to_integer ("0xABCD")   Hex
+ *
+ * Conversion rules as extracted from the ACPI specification:
+ *
+ *  1)  The input string is either a decimal or hexadecimal numeric string.
+ *      A hex value must be prefixed by "0x" or it is interpreted as decimal.
+ *
+ *  2)  The value must not exceed the maximum of an integer value
+ *      (32 or 64 bits). The ACPI specification states the behavior is
+ *      "unpredictable", so ACPICA matches the behavior of the implicit
+ *      conversion case. There are no numeric overflow conditions. (NO ERROR)
+ *
+ *  3)  Behavior on the first non-hex character is not defined by the ACPI
+ *      specification (for the to_integer operator), so ACPICA matches the
+ *      behavior of the implicit conversion case. It terminates the
+ *      conversion and returns the current accumulated value of the converted
+ *      integer. (NO ERROR)
+ *
+ *  4)  Conversion of a null (zero-length) string to an integer is
+ *      technically not allowed. However, ACPICA allows this as an ACPI
+ *      extension. The conversion returns the value 0. (NO ERROR)
+ *
+ * NOTE: There are no error conditions returned by this function. At the
+ * minimum, a value of zero is returned.
+ *
+ * Current users of this function:
+ *
+ *  interpreter - Runtime ASL to_integer operator, as per the ACPI specification
+ *
+ ******************************************************************************/
+
+u64 acpi_ut_explicit_strtoul64(char *string)
+{
+	u64 converted_integer = 0;
+	u32 base = 10;		/* Default is decimal */
+
+	ACPI_FUNCTION_TRACE_STR(ut_explicit_strtoul64, string);
+
+	if (!acpi_ut_remove_whitespace(&string)) {
+		return_VALUE(0);
+	}
+
+	/*
+	 * Only Hex and Decimal are supported, as per the ACPI specification.
+	 * A "0x" prefix indicates hex; otherwise decimal is assumed.
+	 */
+	if (acpi_ut_detect_hex_prefix(&string)) {
+		base = 16;
+	}
+
+	if (!acpi_ut_remove_leading_zeros(&string)) {
+		return_VALUE(0);
+	}
+
+	/*
+	 * Ignore overflow as per the ACPI specification. This is implemented by
+	 * ignoring the return status from the conversion functions called below.
+	 * On overflow, the input string is simply truncated.
+	 */
+	switch (base) {
+	case 10:
+	default:
+		acpi_ut_convert_decimal_string(string, &converted_integer);
+		break;
+
+	case 16:
+		acpi_ut_convert_hex_string(string, &converted_integer);
+		break;
+	}
+
+	return_VALUE(converted_integer);
+}