Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 374 insertions, 0 deletions

diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
new file mode 100644
index 000000000..9cf9bf36a
--- /dev/null
+++ b/drivers/ata/ahci_qoriq.c
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Freescale QorIQ AHCI SATA platform driver
+ *
+ * Copyright 2015 Freescale, Inc.
+ *   Tang Yuantian <Yuantian.Tang@freescale.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/ahci_platform.h>
+#include <linux/device.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include "ahci.h"
+
+#define DRV_NAME "ahci-qoriq"
+
+/* port register definition */
+#define PORT_PHY1	0xA8
+#define PORT_PHY2	0xAC
+#define PORT_PHY3	0xB0
+#define PORT_PHY4	0xB4
+#define PORT_PHY5	0xB8
+#define PORT_AXICC	0xBC
+#define PORT_TRANS	0xC8
+
+/* port register default value */
+#define AHCI_PORT_PHY_1_CFG	0xa003fffe
+#define AHCI_PORT_PHY2_CFG	0x28184d1f
+#define AHCI_PORT_PHY3_CFG	0x0e081509
+#define AHCI_PORT_TRANS_CFG	0x08000029
+#define AHCI_PORT_AXICC_CFG	0x3fffffff
+
+/* for ls1021a */
+#define LS1021A_PORT_PHY2	0x28183414
+#define LS1021A_PORT_PHY3	0x0e080e06
+#define LS1021A_PORT_PHY4	0x064a080b
+#define LS1021A_PORT_PHY5	0x2aa86470
+#define LS1021A_AXICC_ADDR	0xC0
+
+#define SATA_ECC_DISABLE	0x00020000
+#define ECC_DIS_ARMV8_CH2	0x80000000
+#define ECC_DIS_LS1088A		0x40000000
+
+enum ahci_qoriq_type {
+	AHCI_LS1021A,
+	AHCI_LS1028A,
+	AHCI_LS1043A,
+	AHCI_LS2080A,
+	AHCI_LS1046A,
+	AHCI_LS1088A,
+	AHCI_LS2088A,
+	AHCI_LX2160A,
+};
+
+struct ahci_qoriq_priv {
+	struct ccsr_ahci *reg_base;
+	enum ahci_qoriq_type type;
+	void __iomem *ecc_addr;
+	bool is_dmacoherent;
+};
+
+static bool ecc_initialized;
+
+static const struct of_device_id ahci_qoriq_of_match[] = {
+	{ .compatible = "fsl,ls1021a-ahci", .data = (void *)AHCI_LS1021A},
+	{ .compatible = "fsl,ls1028a-ahci", .data = (void *)AHCI_LS1028A},
+	{ .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A},
+	{ .compatible = "fsl,ls2080a-ahci", .data = (void *)AHCI_LS2080A},
+	{ .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A},
+	{ .compatible = "fsl,ls1088a-ahci", .data = (void *)AHCI_LS1088A},
+	{ .compatible = "fsl,ls2088a-ahci", .data = (void *)AHCI_LS2088A},
+	{ .compatible = "fsl,lx2160a-ahci", .data = (void *)AHCI_LX2160A},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ahci_qoriq_of_match);
+
+static const struct acpi_device_id ahci_qoriq_acpi_match[] = {
+	{"NXP0004", .driver_data = (kernel_ulong_t)AHCI_LX2160A},
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, ahci_qoriq_acpi_match);
+
+static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class,
+			  unsigned long deadline)
+{
+	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+	void __iomem *port_mmio = ahci_port_base(link->ap);
+	u32 px_cmd, px_is, px_val;
+	struct ata_port *ap = link->ap;
+	struct ahci_port_priv *pp = ap->private_data;
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	struct ahci_qoriq_priv *qoriq_priv = hpriv->plat_data;
+	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+	struct ata_taskfile tf;
+	bool online;
+	int rc;
+	bool ls1021a_workaround = (qoriq_priv->type == AHCI_LS1021A);
+
+	hpriv->stop_engine(ap);
+
+	/*
+	 * There is a errata on ls1021a Rev1.0 and Rev2.0 which is:
+	 * A-009042: The device detection initialization sequence
+	 * mistakenly resets some registers.
+	 *
+	 * Workaround for this is:
+	 * The software should read and store PxCMD and PxIS values
+	 * before issuing the device detection initialization sequence.
+	 * After the sequence is complete, software should restore the
+	 * PxCMD and PxIS with the stored values.
+	 */
+	if (ls1021a_workaround) {
+		px_cmd = readl(port_mmio + PORT_CMD);
+		px_is = readl(port_mmio + PORT_IRQ_STAT);
+	}
+
+	/* clear D2H reception area to properly wait for D2H FIS */
+	ata_tf_init(link->device, &tf);
+	tf.status = ATA_BUSY;
+	ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+
+	rc = sata_link_hardreset(link, timing, deadline, &online,
+				 ahci_check_ready);
+
+	/* restore the PxCMD and PxIS on ls1021 */
+	if (ls1021a_workaround) {
+		px_val = readl(port_mmio + PORT_CMD);
+		if (px_val != px_cmd)
+			writel(px_cmd, port_mmio + PORT_CMD);
+
+		px_val = readl(port_mmio + PORT_IRQ_STAT);
+		if (px_val != px_is)
+			writel(px_is, port_mmio + PORT_IRQ_STAT);
+	}
+
+	hpriv->start_engine(ap);
+
+	if (online)
+		*class = ahci_dev_classify(ap);
+	return rc;
+}
+
+static struct ata_port_operations ahci_qoriq_ops = {
+	.inherits	= &ahci_ops,
+	.hardreset	= ahci_qoriq_hardreset,
+};
+
+static const struct ata_port_info ahci_qoriq_port_info = {
+	.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
+	.pio_mask	= ATA_PIO4,
+	.udma_mask	= ATA_UDMA6,
+	.port_ops	= &ahci_qoriq_ops,
+};
+
+static struct scsi_host_template ahci_qoriq_sht = {
+	AHCI_SHT(DRV_NAME),
+};
+
+static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
+{
+	struct ahci_qoriq_priv *qpriv = hpriv->plat_data;
+	void __iomem *reg_base = hpriv->mmio;
+
+	switch (qpriv->type) {
+	case AHCI_LS1021A:
+		if (!(qpriv->ecc_addr || ecc_initialized))
+			return -EINVAL;
+		else if (qpriv->ecc_addr && !ecc_initialized)
+			writel(SATA_ECC_DISABLE, qpriv->ecc_addr);
+		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(LS1021A_PORT_PHY2, reg_base + PORT_PHY2);
+		writel(LS1021A_PORT_PHY3, reg_base + PORT_PHY3);
+		writel(LS1021A_PORT_PHY4, reg_base + PORT_PHY4);
+		writel(LS1021A_PORT_PHY5, reg_base + PORT_PHY5);
+		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+		if (qpriv->is_dmacoherent)
+			writel(AHCI_PORT_AXICC_CFG,
+					reg_base + LS1021A_AXICC_ADDR);
+		break;
+
+	case AHCI_LS1043A:
+		if (!(qpriv->ecc_addr || ecc_initialized))
+			return -EINVAL;
+		else if (qpriv->ecc_addr && !ecc_initialized)
+			writel(readl(qpriv->ecc_addr) |
+			       ECC_DIS_ARMV8_CH2,
+			       qpriv->ecc_addr);
+		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
+		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+		if (qpriv->is_dmacoherent)
+			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
+		break;
+
+	case AHCI_LS2080A:
+		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
+		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+		if (qpriv->is_dmacoherent)
+			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
+		break;
+
+	case AHCI_LS1046A:
+		if (!(qpriv->ecc_addr || ecc_initialized))
+			return -EINVAL;
+		else if (qpriv->ecc_addr && !ecc_initialized)
+			writel(readl(qpriv->ecc_addr) |
+			       ECC_DIS_ARMV8_CH2,
+			       qpriv->ecc_addr);
+		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
+		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+		if (qpriv->is_dmacoherent)
+			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
+		break;
+
+	case AHCI_LS1028A:
+	case AHCI_LS1088A:
+	case AHCI_LX2160A:
+		if (!(qpriv->ecc_addr || ecc_initialized))
+			return -EINVAL;
+		else if (qpriv->ecc_addr && !ecc_initialized)
+			writel(readl(qpriv->ecc_addr) |
+			       ECC_DIS_LS1088A,
+			       qpriv->ecc_addr);
+		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
+		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+		if (qpriv->is_dmacoherent)
+			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
+		break;
+
+	case AHCI_LS2088A:
+		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
+		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+		if (qpriv->is_dmacoherent)
+			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
+		break;
+	}
+
+	ecc_initialized = true;
+	return 0;
+}
+
+static int ahci_qoriq_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const struct acpi_device_id *acpi_id;
+	struct device *dev = &pdev->dev;
+	struct ahci_host_priv *hpriv;
+	struct ahci_qoriq_priv *qoriq_priv;
+	const struct of_device_id *of_id;
+	struct resource *res;
+	int rc;
+
+	hpriv = ahci_platform_get_resources(pdev, 0);
+	if (IS_ERR(hpriv))
+		return PTR_ERR(hpriv);
+
+	of_id = of_match_node(ahci_qoriq_of_match, np);
+	acpi_id = acpi_match_device(ahci_qoriq_acpi_match, &pdev->dev);
+	if (!(of_id || acpi_id))
+		return -ENODEV;
+
+	qoriq_priv = devm_kzalloc(dev, sizeof(*qoriq_priv), GFP_KERNEL);
+	if (!qoriq_priv)
+		return -ENOMEM;
+
+	if (of_id)
+		qoriq_priv->type = (unsigned long)of_id->data;
+	else
+		qoriq_priv->type = (enum ahci_qoriq_type)acpi_id->driver_data;
+
+	if (unlikely(!ecc_initialized)) {
+		res = platform_get_resource_byname(pdev,
+						   IORESOURCE_MEM,
+						   "sata-ecc");
+		if (res) {
+			qoriq_priv->ecc_addr =
+				devm_ioremap_resource(dev, res);
+			if (IS_ERR(qoriq_priv->ecc_addr))
+				return PTR_ERR(qoriq_priv->ecc_addr);
+		}
+	}
+
+	if (device_get_dma_attr(&pdev->dev) == DEV_DMA_COHERENT)
+		qoriq_priv->is_dmacoherent = true;
+
+	rc = ahci_platform_enable_resources(hpriv);
+	if (rc)
+		return rc;
+
+	hpriv->plat_data = qoriq_priv;
+	rc = ahci_qoriq_phy_init(hpriv);
+	if (rc)
+		goto disable_resources;
+
+	rc = ahci_platform_init_host(pdev, hpriv, &ahci_qoriq_port_info,
+				     &ahci_qoriq_sht);
+	if (rc)
+		goto disable_resources;
+
+	return 0;
+
+disable_resources:
+	ahci_platform_disable_resources(hpriv);
+
+	return rc;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ahci_qoriq_resume(struct device *dev)
+{
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	int rc;
+
+	rc = ahci_platform_enable_resources(hpriv);
+	if (rc)
+		return rc;
+
+	rc = ahci_qoriq_phy_init(hpriv);
+	if (rc)
+		goto disable_resources;
+
+	rc = ahci_platform_resume_host(dev);
+	if (rc)
+		goto disable_resources;
+
+	/* We resumed so update PM runtime state */
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+
+disable_resources:
+	ahci_platform_disable_resources(hpriv);
+
+	return rc;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ahci_qoriq_pm_ops, ahci_platform_suspend,
+			 ahci_qoriq_resume);
+
+static struct platform_driver ahci_qoriq_driver = {
+	.probe = ahci_qoriq_probe,
+	.remove = ata_platform_remove_one,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = ahci_qoriq_of_match,
+		.acpi_match_table = ahci_qoriq_acpi_match,
+		.pm = &ahci_qoriq_pm_ops,
+	},
+};
+module_platform_driver(ahci_qoriq_driver);
+
+MODULE_DESCRIPTION("Freescale QorIQ AHCI SATA platform driver");
+MODULE_AUTHOR("Tang Yuantian <Yuantian.Tang@freescale.com>");
+MODULE_LICENSE("GPL");