Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 320 insertions, 0 deletions

diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
new file mode 100644
index 000000000..efdb94cff
--- /dev/null
+++ b/drivers/ata/pata_atiixp.c
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pata_atiixp.c 	- ATI PATA for new ATA layer
+ *			  (C) 2005 Red Hat Inc
+ *			  (C) 2009-2010 Bartlomiej Zolnierkiewicz
+ *
+ * Based on
+ *
+ *  linux/drivers/ide/pci/atiixp.c	Version 0.01-bart2	Feb. 26, 2004
+ *
+ *  Copyright (C) 2003 ATI Inc. <hyu@ati.com>
+ *  Copyright (C) 2004 Bartlomiej Zolnierkiewicz
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/dmi.h>
+
+#define DRV_NAME "pata_atiixp"
+#define DRV_VERSION "0.4.6"
+
+enum {
+	ATIIXP_IDE_PIO_TIMING	= 0x40,
+	ATIIXP_IDE_MWDMA_TIMING	= 0x44,
+	ATIIXP_IDE_PIO_CONTROL	= 0x48,
+	ATIIXP_IDE_PIO_MODE	= 0x4a,
+	ATIIXP_IDE_UDMA_CONTROL	= 0x54,
+	ATIIXP_IDE_UDMA_MODE 	= 0x56
+};
+
+static const struct dmi_system_id attixp_cable_override_dmi_table[] = {
+	{
+		/* Board has onboard PATA<->SATA converters */
+		.ident = "MSI E350DM-E33",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "MSI"),
+			DMI_MATCH(DMI_BOARD_NAME, "E350DM-E33(MS-7720)"),
+		},
+	},
+	{ }
+};
+
+static int atiixp_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 udma;
+
+	if (dmi_check_system(attixp_cable_override_dmi_table))
+		return ATA_CBL_PATA40_SHORT;
+
+	/* Hack from drivers/ide/pci. Really we want to know how to do the
+	   raw detection not play follow the bios mode guess */
+	pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
+	if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40)
+		return  ATA_CBL_PATA80;
+	return ATA_CBL_PATA40;
+}
+
+static DEFINE_SPINLOCK(atiixp_lock);
+
+/**
+ *	atiixp_prereset	-	perform reset handling
+ *	@link: ATA link
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Reset sequence checking enable bits to see which ports are
+ *	active.
+ */
+
+static int atiixp_prereset(struct ata_link *link, unsigned long deadline)
+{
+	static const struct pci_bits atiixp_enable_bits[] = {
+		{ 0x48, 1, 0x01, 0x00 },
+		{ 0x48, 1, 0x08, 0x00 }
+	};
+
+	struct ata_port *ap = link->ap;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
+		return -ENOENT;
+
+	return ata_sff_prereset(link, deadline);
+}
+
+/**
+ *	atiixp_set_pio_timing	-	set initial PIO mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *	@pio: Requested PIO
+ *
+ *	Called by both the pio and dma setup functions to set the controller
+ *	timings for PIO transfers. We must load both the mode number and
+ *	timing values into the controller.
+ */
+
+static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio)
+{
+	static const u8 pio_timings[5] = { 0x5D, 0x47, 0x34, 0x22, 0x20 };
+
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int dn = 2 * ap->port_no + adev->devno;
+	int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
+	u32 pio_timing_data;
+	u16 pio_mode_data;
+
+	pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
+	pio_mode_data &= ~(0x7 << (4 * dn));
+	pio_mode_data |= pio << (4 * dn);
+	pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
+
+	pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
+	pio_timing_data &= ~(0xFF << timing_shift);
+	pio_timing_data |= (pio_timings[pio] << timing_shift);
+	pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
+}
+
+/**
+ *	atiixp_set_piomode	-	set initial PIO mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Called to do the PIO mode setup. We use a shared helper for this
+ *	as the DMA setup must also adjust the PIO timing information.
+ */
+
+static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&atiixp_lock, flags);
+	atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0);
+	spin_unlock_irqrestore(&atiixp_lock, flags);
+}
+
+/**
+ *	atiixp_set_dmamode	-	set initial DMA mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Called to do the DMA mode setup. We use timing tables for most
+ *	modes but must tune an appropriate PIO mode to match.
+ */
+
+static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	static const u8 mwdma_timings[5] = { 0x77, 0x21, 0x20 };
+
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int dma = adev->dma_mode;
+	int dn = 2 * ap->port_no + adev->devno;
+	int wanted_pio;
+	unsigned long flags;
+
+	spin_lock_irqsave(&atiixp_lock, flags);
+
+	if (adev->dma_mode >= XFER_UDMA_0) {
+		u16 udma_mode_data;
+
+		dma -= XFER_UDMA_0;
+
+		pci_read_config_word(pdev, ATIIXP_IDE_UDMA_MODE, &udma_mode_data);
+		udma_mode_data &= ~(0x7 << (4 * dn));
+		udma_mode_data |= dma << (4 * dn);
+		pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data);
+	} else {
+		int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
+		u32 mwdma_timing_data;
+
+		dma -= XFER_MW_DMA_0;
+
+		pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+				      &mwdma_timing_data);
+		mwdma_timing_data &= ~(0xFF << timing_shift);
+		mwdma_timing_data |= (mwdma_timings[dma] << timing_shift);
+		pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+				       mwdma_timing_data);
+	}
+	/*
+	 *	We must now look at the PIO mode situation. We may need to
+	 *	adjust the PIO mode to keep the timings acceptable
+	 */
+	if (adev->dma_mode >= XFER_MW_DMA_2)
+		wanted_pio = 4;
+	else if (adev->dma_mode == XFER_MW_DMA_1)
+		wanted_pio = 3;
+	else if (adev->dma_mode == XFER_MW_DMA_0)
+		wanted_pio = 0;
+	else BUG();
+
+	if (adev->pio_mode != wanted_pio)
+		atiixp_set_pio_timing(ap, adev, wanted_pio);
+	spin_unlock_irqrestore(&atiixp_lock, flags);
+}
+
+/**
+ *	atiixp_bmdma_start	-	DMA start callback
+ *	@qc: Command in progress
+ *
+ *	When DMA begins we need to ensure that the UDMA control
+ *	register for the channel is correctly set.
+ *
+ *	Note: The host lock held by the libata layer protects
+ *	us from two channels both trying to set DMA bits at once
+ */
+
+static void atiixp_bmdma_start(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct ata_device *adev = qc->dev;
+
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int dn = (2 * ap->port_no) + adev->devno;
+	u16 tmp16;
+
+	pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
+	if (ata_using_udma(adev))
+		tmp16 |= (1 << dn);
+	else
+		tmp16 &= ~(1 << dn);
+	pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
+	ata_bmdma_start(qc);
+}
+
+/**
+ *	atiixp_bmdma_stop	-	DMA stop callback
+ *	@qc: Command in progress
+ *
+ *	DMA has completed. Clear the UDMA flag as the next operations will
+ *	be PIO ones not UDMA data transfer.
+ *
+ *	Note: The host lock held by the libata layer protects
+ *	us from two channels both trying to set DMA bits at once
+ */
+
+static void atiixp_bmdma_stop(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int dn = (2 * ap->port_no) + qc->dev->devno;
+	u16 tmp16;
+
+	pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
+	tmp16 &= ~(1 << dn);
+	pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
+	ata_bmdma_stop(qc);
+}
+
+static struct scsi_host_template atiixp_sht = {
+	ATA_BASE_SHT(DRV_NAME),
+	.sg_tablesize		= LIBATA_DUMB_MAX_PRD,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+};
+
+static struct ata_port_operations atiixp_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+
+	.qc_prep 	= ata_bmdma_dumb_qc_prep,
+	.bmdma_start 	= atiixp_bmdma_start,
+	.bmdma_stop	= atiixp_bmdma_stop,
+
+	.prereset	= atiixp_prereset,
+	.cable_detect	= atiixp_cable_detect,
+	.set_piomode	= atiixp_set_piomode,
+	.set_dmamode	= atiixp_set_dmamode,
+};
+
+static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	static const struct ata_port_info info = {
+		.flags = ATA_FLAG_SLAVE_POSS,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA12_ONLY,
+		.udma_mask = ATA_UDMA5,
+		.port_ops = &atiixp_port_ops
+	};
+	const struct ata_port_info *ppi[] = { &info, &info };
+
+	/* SB600 doesn't have secondary port wired */
+	if (pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE)
+		ppi[1] = &ata_dummy_port_info;
+
+	return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
+				      ATA_HOST_PARALLEL_SCAN);
+}
+
+static const struct pci_device_id atiixp[] = {
+	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), },
+	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), },
+	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), },
+	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), },
+	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), },
+
+	{ },
+};
+
+static struct pci_driver atiixp_pci_driver = {
+	.name 		= DRV_NAME,
+	.id_table	= atiixp,
+	.probe 		= atiixp_init_one,
+	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+	.resume		= ata_pci_device_resume,
+	.suspend	= ata_pci_device_suspend,
+#endif
+};
+
+module_pci_driver(atiixp_pci_driver);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, atiixp);
+MODULE_VERSION(DRV_VERSION);