Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 461 insertions, 0 deletions

diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
new file mode 100644
index 000000000..7e441fb30
--- /dev/null
+++ b/drivers/ata/pata_hpt366.c
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Libata driver for the highpoint 366 and 368 UDMA66 ATA controllers.
+ *
+ * This driver is heavily based upon:
+ *
+ * linux/drivers/ide/pci/hpt366.c		Version 0.36	April 25, 2003
+ *
+ * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>
+ * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
+ * Portions Copyright (C) 2003		Red Hat Inc
+ *
+ *
+ * TODO
+ *	Look into engine reset on timeout errors. Should not be required.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME	"pata_hpt366"
+#define DRV_VERSION	"0.6.13"
+
+struct hpt_clock {
+	u8	xfer_mode;
+	u32	timing;
+};
+
+/* key for bus clock timings
+ * bit
+ * 0:3    data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA.
+ *        cycles = value + 1
+ * 4:7    data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA.
+ *        cycles = value + 1
+ * 8:11   cmd_high_time. Inactive time of DIOW_/DIOR_ during task file
+ *        register access.
+ * 12:15  cmd_low_time. Active time of DIOW_/DIOR_ during task file
+ *        register access.
+ * 16:18  udma_cycle_time. Clock cycles for UDMA xfer?
+ * 19:21  pre_high_time. Time to initialize 1st cycle for PIO and MW DMA xfer.
+ * 22:24  cmd_pre_high_time. Time to initialize 1st PIO cycle for task file
+ *        register access.
+ * 28     UDMA enable.
+ * 29     DMA  enable.
+ * 30     PIO_MST enable. If set, the chip is in bus master mode during
+ *        PIO xfer.
+ * 31     FIFO enable.
+ */
+
+static const struct hpt_clock hpt366_40[] = {
+	{	XFER_UDMA_4,	0x900fd943	},
+	{	XFER_UDMA_3,	0x900ad943	},
+	{	XFER_UDMA_2,	0x900bd943	},
+	{	XFER_UDMA_1,	0x9008d943	},
+	{	XFER_UDMA_0,	0x9008d943	},
+
+	{	XFER_MW_DMA_2,	0xa008d943	},
+	{	XFER_MW_DMA_1,	0xa010d955	},
+	{	XFER_MW_DMA_0,	0xa010d9fc	},
+
+	{	XFER_PIO_4,	0xc008d963	},
+	{	XFER_PIO_3,	0xc010d974	},
+	{	XFER_PIO_2,	0xc010d997	},
+	{	XFER_PIO_1,	0xc010d9c7	},
+	{	XFER_PIO_0,	0xc018d9d9	},
+	{	0,		0x0120d9d9	}
+};
+
+static const struct hpt_clock hpt366_33[] = {
+	{	XFER_UDMA_4,	0x90c9a731	},
+	{	XFER_UDMA_3,	0x90cfa731	},
+	{	XFER_UDMA_2,	0x90caa731	},
+	{	XFER_UDMA_1,	0x90cba731	},
+	{	XFER_UDMA_0,	0x90c8a731	},
+
+	{	XFER_MW_DMA_2,	0xa0c8a731	},
+	{	XFER_MW_DMA_1,	0xa0c8a732	},	/* 0xa0c8a733 */
+	{	XFER_MW_DMA_0,	0xa0c8a797	},
+
+	{	XFER_PIO_4,	0xc0c8a731	},
+	{	XFER_PIO_3,	0xc0c8a742	},
+	{	XFER_PIO_2,	0xc0d0a753	},
+	{	XFER_PIO_1,	0xc0d0a7a3	},	/* 0xc0d0a793 */
+	{	XFER_PIO_0,	0xc0d0a7aa	},	/* 0xc0d0a7a7 */
+	{	0,		0x0120a7a7	}
+};
+
+static const struct hpt_clock hpt366_25[] = {
+	{	XFER_UDMA_4,	0x90c98521	},
+	{	XFER_UDMA_3,	0x90cf8521	},
+	{	XFER_UDMA_2,	0x90cf8521	},
+	{	XFER_UDMA_1,	0x90cb8521	},
+	{	XFER_UDMA_0,	0x90cb8521	},
+
+	{	XFER_MW_DMA_2,	0xa0ca8521	},
+	{	XFER_MW_DMA_1,	0xa0ca8532	},
+	{	XFER_MW_DMA_0,	0xa0ca8575	},
+
+	{	XFER_PIO_4,	0xc0ca8521	},
+	{	XFER_PIO_3,	0xc0ca8532	},
+	{	XFER_PIO_2,	0xc0ca8542	},
+	{	XFER_PIO_1,	0xc0d08572	},
+	{	XFER_PIO_0,	0xc0d08585	},
+	{	0,		0x01208585	}
+};
+
+/**
+ *	hpt36x_find_mode	-	find the hpt36x timing
+ *	@ap: ATA port
+ *	@speed: transfer mode
+ *
+ *	Return the 32bit register programming information for this channel
+ *	that matches the speed provided.
+ */
+
+static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
+{
+	struct hpt_clock *clocks = ap->host->private_data;
+
+	while (clocks->xfer_mode) {
+		if (clocks->xfer_mode == speed)
+			return clocks->timing;
+		clocks++;
+	}
+	BUG();
+	return 0xffffffffU;	/* silence compiler warning */
+}
+
+static const char * const bad_ata33[] = {
+	"Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3",
+	"Maxtor 90845U3", "Maxtor 90650U2",
+	"Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5",
+	"Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2",
+	"Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6",
+	"Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4",
+	"Maxtor 90510D4",
+	"Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2",
+	"Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7",
+	"Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4",
+	"Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5",
+	"Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2",
+	NULL
+};
+
+static const char * const bad_ata66_4[] = {
+	"IBM-DTLA-307075",
+	"IBM-DTLA-307060",
+	"IBM-DTLA-307045",
+	"IBM-DTLA-307030",
+	"IBM-DTLA-307020",
+	"IBM-DTLA-307015",
+	"IBM-DTLA-305040",
+	"IBM-DTLA-305030",
+	"IBM-DTLA-305020",
+	"IC35L010AVER07-0",
+	"IC35L020AVER07-0",
+	"IC35L030AVER07-0",
+	"IC35L040AVER07-0",
+	"IC35L060AVER07-0",
+	"WDC AC310200R",
+	NULL
+};
+
+static const char * const bad_ata66_3[] = {
+	"WDC AC310200R",
+	NULL
+};
+
+static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
+			       const char * const list[])
+{
+	unsigned char model_num[ATA_ID_PROD_LEN + 1];
+	int i;
+
+	ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
+
+	i = match_string(list, -1, model_num);
+	if (i >= 0) {
+		ata_dev_warn(dev, "%s is not supported for %s\n", modestr, list[i]);
+		return 1;
+	}
+	return 0;
+}
+
+/**
+ *	hpt366_filter	-	mode selection filter
+ *	@adev: ATA device
+ *	@mask: Current mask to manipulate and pass back
+ *
+ *	Block UDMA on devices that cause trouble with this controller.
+ */
+
+static unsigned int hpt366_filter(struct ata_device *adev, unsigned int mask)
+{
+	if (adev->class == ATA_DEV_ATA) {
+		if (hpt_dma_blacklisted(adev, "UDMA",  bad_ata33))
+			mask &= ~ATA_MASK_UDMA;
+		if (hpt_dma_blacklisted(adev, "UDMA3", bad_ata66_3))
+			mask &= ~(0xF8 << ATA_SHIFT_UDMA);
+		if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
+			mask &= ~(0xF0 << ATA_SHIFT_UDMA);
+	} else if (adev->class == ATA_DEV_ATAPI)
+		mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+
+	return mask;
+}
+
+static int hpt36x_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 ata66;
+
+	/*
+	 * Each channel of pata_hpt366 occupies separate PCI function
+	 * as the primary channel and bit1 indicates the cable type.
+	 */
+	pci_read_config_byte(pdev, 0x5A, &ata66);
+	if (ata66 & 2)
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
+}
+
+static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev,
+			    u8 mode)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u32 addr = 0x40 + 4 * adev->devno;
+	u32 mask, reg, t;
+
+	/* determine timing mask and find matching clock entry */
+	if (mode < XFER_MW_DMA_0)
+		mask = 0xc1f8ffff;
+	else if (mode < XFER_UDMA_0)
+		mask = 0x303800ff;
+	else
+		mask = 0x30070000;
+
+	t = hpt36x_find_mode(ap, mode);
+
+	/*
+	 * Combine new mode bits with old config bits and disable
+	 * on-chip PIO FIFO/buffer (and PIO MST mode as well) to avoid
+	 * problems handling I/O errors later.
+	 */
+	pci_read_config_dword(pdev, addr, &reg);
+	reg = ((reg & ~mask) | (t & mask)) & ~0xc0000000;
+	pci_write_config_dword(pdev, addr, reg);
+}
+
+/**
+ *	hpt366_set_piomode		-	PIO setup
+ *	@ap: ATA interface
+ *	@adev: device on the interface
+ *
+ *	Perform PIO mode setup.
+ */
+
+static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	hpt366_set_mode(ap, adev, adev->pio_mode);
+}
+
+/**
+ *	hpt366_set_dmamode		-	DMA timing setup
+ *	@ap: ATA interface
+ *	@adev: Device being configured
+ *
+ *	Set up the channel for MWDMA or UDMA modes. Much the same as with
+ *	PIO, load the mode number and then set MWDMA or UDMA flag.
+ */
+
+static void hpt366_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	hpt366_set_mode(ap, adev, adev->dma_mode);
+}
+
+/**
+ *	hpt366_prereset		-	reset the hpt36x bus
+ *	@link: ATA link to reset
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Perform the initial reset handling for the 36x series controllers.
+ *	Reset the hardware and state machine,
+ */
+
+static int hpt366_prereset(struct ata_link *link, unsigned long deadline)
+{
+	struct ata_port *ap = link->ap;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	/*
+	 * HPT36x chips have one channel per function and have
+	 * both channel enable bits located differently and visible
+	 * to both functions -- really stupid design decision... :-(
+	 * Bit 4 is for the primary channel, bit 5 for the secondary.
+	 */
+	static const struct pci_bits hpt366_enable_bits = {
+		0x50, 1, 0x30, 0x30
+	};
+	u8 mcr2;
+
+	if (!pci_test_config_bits(pdev, &hpt366_enable_bits))
+		return -ENOENT;
+
+	pci_read_config_byte(pdev, 0x51, &mcr2);
+	if (mcr2 & 0x80)
+		pci_write_config_byte(pdev, 0x51, mcr2 & ~0x80);
+
+	return ata_sff_prereset(link, deadline);
+}
+
+static struct scsi_host_template hpt36x_sht = {
+	ATA_BMDMA_SHT(DRV_NAME),
+};
+
+/*
+ *	Configuration for HPT366/68
+ */
+
+static struct ata_port_operations hpt366_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.prereset	= hpt366_prereset,
+	.cable_detect	= hpt36x_cable_detect,
+	.mode_filter	= hpt366_filter,
+	.set_piomode	= hpt366_set_piomode,
+	.set_dmamode	= hpt366_set_dmamode,
+};
+
+/**
+ *	hpt36x_init_chipset	-	common chip setup
+ *	@dev: PCI device
+ *
+ *	Perform the chip setup work that must be done at both init and
+ *	resume time
+ */
+
+static void hpt36x_init_chipset(struct pci_dev *dev)
+{
+	u8 mcr1;
+
+	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
+	pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
+	pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
+
+	/*
+	 * Now we'll have to force both channels enabled if at least one
+	 * of them has been enabled by BIOS...
+	 */
+	pci_read_config_byte(dev, 0x50, &mcr1);
+	if (mcr1 & 0x30)
+		pci_write_config_byte(dev, 0x50, mcr1 | 0x30);
+}
+
+/**
+ *	hpt36x_init_one		-	Initialise an HPT366/368
+ *	@dev: PCI device
+ *	@id: Entry in match table
+ *
+ *	Initialise an HPT36x device. There are some interesting complications
+ *	here. Firstly the chip may report 366 and be one of several variants.
+ *	Secondly all the timings depend on the clock for the chip which we must
+ *	detect and look up
+ *
+ *	This is the known chip mappings. It may be missing a couple of later
+ *	releases.
+ *
+ *	Chip version		PCI		Rev	Notes
+ *	HPT366			4 (HPT366)	0	UDMA66
+ *	HPT366			4 (HPT366)	1	UDMA66
+ *	HPT368			4 (HPT366)	2	UDMA66
+ *	HPT37x/30x		4 (HPT366)	3+	Other driver
+ *
+ */
+
+static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	static const struct ata_port_info info_hpt366 = {
+		.flags = ATA_FLAG_SLAVE_POSS,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
+		.udma_mask = ATA_UDMA4,
+		.port_ops = &hpt366_port_ops
+	};
+	const struct ata_port_info *ppi[] = { &info_hpt366, NULL };
+
+	const void *hpriv = NULL;
+	u32 reg1;
+	int rc;
+
+	rc = pcim_enable_device(dev);
+	if (rc)
+		return rc;
+
+	/* May be a later chip in disguise. Check */
+	/* Newer chips are not in the HPT36x driver. Ignore them */
+	if (dev->revision > 2)
+		return -ENODEV;
+
+	hpt36x_init_chipset(dev);
+
+	pci_read_config_dword(dev, 0x40,  &reg1);
+
+	/* PCI clocking determines the ATA timing values to use */
+	/* info_hpt366 is safe against re-entry so we can scribble on it */
+	switch ((reg1 & 0xf00) >> 8) {
+	case 9:
+		hpriv = &hpt366_40;
+		break;
+	case 5:
+		hpriv = &hpt366_25;
+		break;
+	default:
+		hpriv = &hpt366_33;
+		break;
+	}
+	/* Now kick off ATA set up */
+	return ata_pci_bmdma_init_one(dev, ppi, &hpt36x_sht, (void *)hpriv, 0);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int hpt36x_reinit_one(struct pci_dev *dev)
+{
+	struct ata_host *host = pci_get_drvdata(dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(dev);
+	if (rc)
+		return rc;
+	hpt36x_init_chipset(dev);
+	ata_host_resume(host);
+	return 0;
+}
+#endif
+
+static const struct pci_device_id hpt36x[] = {
+	{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), },
+	{ },
+};
+
+static struct pci_driver hpt36x_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= hpt36x,
+	.probe		= hpt36x_init_one,
+	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+	.suspend	= ata_pci_device_suspend,
+	.resume		= hpt36x_reinit_one,
+#endif
+};
+
+module_pci_driver(hpt36x_pci_driver);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for the Highpoint HPT366/368");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, hpt36x);
+MODULE_VERSION(DRV_VERSION);