Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 238 insertions, 0 deletions

diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
new file mode 100644
index 000000000..21fb05985
--- /dev/null
+++ b/drivers/ata/pata_platform.c
@@ -0,0 +1,238 @@
+/*
+ * Generic platform device PATA driver
+ *
+ * Copyright (C) 2006 - 2007  Paul Mundt
+ *
+ * Based on pata_pcmcia:
+ *
+ *   Copyright 2005-2006 Red Hat Inc, all rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_host.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+
+#define DRV_NAME "pata_platform"
+#define DRV_VERSION "1.2"
+
+static int pio_mask = 1;
+module_param(pio_mask, int, 0);
+MODULE_PARM_DESC(pio_mask, "PIO modes supported, mode 0 only by default");
+
+/*
+ * Provide our own set_mode() as we don't want to change anything that has
+ * already been configured..
+ */
+static int pata_platform_set_mode(struct ata_link *link, struct ata_device **unused)
+{
+	struct ata_device *dev;
+
+	ata_for_each_dev(dev, link, ENABLED) {
+		/* We don't really care */
+		dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
+		dev->xfer_shift = ATA_SHIFT_PIO;
+		dev->flags |= ATA_DFLAG_PIO;
+		ata_dev_info(dev, "configured for PIO\n");
+	}
+	return 0;
+}
+
+static struct scsi_host_template pata_platform_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+static void pata_platform_setup_port(struct ata_ioports *ioaddr,
+				     unsigned int shift)
+{
+	/* Fixup the port shift for platforms that need it */
+	ioaddr->data_addr	= ioaddr->cmd_addr + (ATA_REG_DATA    << shift);
+	ioaddr->error_addr	= ioaddr->cmd_addr + (ATA_REG_ERR     << shift);
+	ioaddr->feature_addr	= ioaddr->cmd_addr + (ATA_REG_FEATURE << shift);
+	ioaddr->nsect_addr	= ioaddr->cmd_addr + (ATA_REG_NSECT   << shift);
+	ioaddr->lbal_addr	= ioaddr->cmd_addr + (ATA_REG_LBAL    << shift);
+	ioaddr->lbam_addr	= ioaddr->cmd_addr + (ATA_REG_LBAM    << shift);
+	ioaddr->lbah_addr	= ioaddr->cmd_addr + (ATA_REG_LBAH    << shift);
+	ioaddr->device_addr	= ioaddr->cmd_addr + (ATA_REG_DEVICE  << shift);
+	ioaddr->status_addr	= ioaddr->cmd_addr + (ATA_REG_STATUS  << shift);
+	ioaddr->command_addr	= ioaddr->cmd_addr + (ATA_REG_CMD     << shift);
+}
+
+/**
+ *	__pata_platform_probe		-	attach a platform interface
+ *	@dev: device
+ *	@io_res: Resource representing I/O base
+ *	@ctl_res: Resource representing CTL base
+ *	@irq_res: Resource representing IRQ and its flags
+ *	@ioport_shift: I/O port shift
+ *	@__pio_mask: PIO mask
+ *	@sht: scsi_host_template to use when registering
+ *	@use16bit: Flag to indicate 16-bit IO instead of 32-bit
+ *
+ *	Register a platform bus IDE interface. Such interfaces are PIO and we
+ *	assume do not support IRQ sharing.
+ *
+ *	Platform devices are expected to contain at least 2 resources per port:
+ *
+ *		- I/O Base (IORESOURCE_IO or IORESOURCE_MEM)
+ *		- CTL Base (IORESOURCE_IO or IORESOURCE_MEM)
+ *
+ *	and optionally:
+ *
+ *		- IRQ	   (IORESOURCE_IRQ)
+ *
+ *	If the base resources are both mem types, the ioremap() is handled
+ *	here. For IORESOURCE_IO, it's assumed that there's no remapping
+ *	necessary.
+ *
+ *	If no IRQ resource is present, PIO polling mode is used instead.
+ */
+int __pata_platform_probe(struct device *dev, struct resource *io_res,
+			  struct resource *ctl_res, struct resource *irq_res,
+			  unsigned int ioport_shift, int __pio_mask,
+			  struct scsi_host_template *sht, bool use16bit)
+{
+	struct ata_host *host;
+	struct ata_port *ap;
+	unsigned int mmio;
+	int irq = 0;
+	int irq_flags = 0;
+
+	/*
+	 * Check for MMIO
+	 */
+	mmio = (( io_res->flags == IORESOURCE_MEM) &&
+		(ctl_res->flags == IORESOURCE_MEM));
+
+	/*
+	 * And the IRQ
+	 */
+	if (irq_res && irq_res->start > 0) {
+		irq = irq_res->start;
+		irq_flags = (irq_res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
+	}
+
+	/*
+	 * Now that that's out of the way, wire up the port..
+	 */
+	host = ata_host_alloc(dev, 1);
+	if (!host)
+		return -ENOMEM;
+	ap = host->ports[0];
+
+	ap->ops = devm_kzalloc(dev, sizeof(*ap->ops), GFP_KERNEL);
+	if (!ap->ops)
+		return -ENOMEM;
+	ap->ops->inherits = &ata_sff_port_ops;
+	ap->ops->cable_detect = ata_cable_unknown;
+	ap->ops->set_mode = pata_platform_set_mode;
+	if (use16bit)
+		ap->ops->sff_data_xfer = ata_sff_data_xfer;
+	else
+		ap->ops->sff_data_xfer = ata_sff_data_xfer32;
+
+	ap->pio_mask = __pio_mask;
+	ap->flags |= ATA_FLAG_SLAVE_POSS;
+
+	/*
+	 * Use polling mode if there's no IRQ
+	 */
+	if (!irq) {
+		ap->flags |= ATA_FLAG_PIO_POLLING;
+		ata_port_desc(ap, "no IRQ, using PIO polling");
+	}
+
+	/*
+	 * Handle the MMIO case
+	 */
+	if (mmio) {
+		ap->ioaddr.cmd_addr = devm_ioremap(dev, io_res->start,
+				resource_size(io_res));
+		ap->ioaddr.ctl_addr = devm_ioremap(dev, ctl_res->start,
+				resource_size(ctl_res));
+	} else {
+		ap->ioaddr.cmd_addr = devm_ioport_map(dev, io_res->start,
+				resource_size(io_res));
+		ap->ioaddr.ctl_addr = devm_ioport_map(dev, ctl_res->start,
+				resource_size(ctl_res));
+	}
+	if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
+		dev_err(dev, "failed to map IO/CTL base\n");
+		return -ENOMEM;
+	}
+
+	ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
+
+	pata_platform_setup_port(&ap->ioaddr, ioport_shift);
+
+	ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport",
+		      (unsigned long long)io_res->start,
+		      (unsigned long long)ctl_res->start);
+
+	/* activate */
+	return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL,
+				 irq_flags, sht);
+}
+EXPORT_SYMBOL_GPL(__pata_platform_probe);
+
+static int pata_platform_probe(struct platform_device *pdev)
+{
+	struct resource *io_res;
+	struct resource *ctl_res;
+	struct resource *irq_res;
+	struct pata_platform_info *pp_info = dev_get_platdata(&pdev->dev);
+
+	/*
+	 * Simple resource validation ..
+	 */
+	if ((pdev->num_resources != 3) && (pdev->num_resources != 2)) {
+		dev_err(&pdev->dev, "invalid number of resources\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Get the I/O base first
+	 */
+	io_res = platform_get_mem_or_io(pdev, 0);
+	if (!io_res)
+		return -EINVAL;
+
+	/*
+	 * Then the CTL base
+	 */
+	ctl_res = platform_get_mem_or_io(pdev, 1);
+	if (!ctl_res)
+		return -EINVAL;
+
+	/*
+	 * And the IRQ
+	 */
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+	return __pata_platform_probe(&pdev->dev, io_res, ctl_res, irq_res,
+				     pp_info ? pp_info->ioport_shift : 0,
+				     pio_mask, &pata_platform_sht, false);
+}
+
+static struct platform_driver pata_platform_driver = {
+	.probe		= pata_platform_probe,
+	.remove		= ata_platform_remove_one,
+	.driver = {
+		.name		= DRV_NAME,
+	},
+};
+
+module_platform_driver(pata_platform_driver);
+
+MODULE_AUTHOR("Paul Mundt");
+MODULE_DESCRIPTION("low-level driver for platform device ATA");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);