Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 375 insertions, 0 deletions

diff --git a/drivers/atm/idt77105.c b/drivers/atm/idt77105.c
new file mode 100644
index 000000000..bfca7b8a6
--- /dev/null
+++ b/drivers/atm/idt77105.c
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* drivers/atm/idt77105.c - IDT77105 (PHY) driver */
+ 
+/* Written 1999 by Greg Banks, NEC Australia <gnb@linuxfan.com>. Based on suni.c */
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/atmdev.h>
+#include <linux/sonet.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/capability.h>
+#include <linux/atm_idt77105.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <asm/param.h>
+#include <linux/uaccess.h>
+
+#include "idt77105.h"
+
+#undef GENERAL_DEBUG
+
+#ifdef GENERAL_DEBUG
+#define DPRINTK(format,args...) printk(KERN_DEBUG format,##args)
+#else
+#define DPRINTK(format,args...)
+#endif
+
+
+struct idt77105_priv {
+	struct idt77105_stats stats;    /* link diagnostics */
+	struct atm_dev *dev;		/* device back-pointer */
+	struct idt77105_priv *next;
+        int loop_mode;
+        unsigned char old_mcr;          /* storage of MCR reg while signal lost */
+};
+
+static DEFINE_SPINLOCK(idt77105_priv_lock);
+
+#define PRIV(dev) ((struct idt77105_priv *) dev->phy_data)
+
+#define PUT(val,reg) dev->ops->phy_put(dev,val,IDT77105_##reg)
+#define GET(reg) dev->ops->phy_get(dev,IDT77105_##reg)
+
+static void idt77105_stats_timer_func(struct timer_list *);
+static void idt77105_restart_timer_func(struct timer_list *);
+
+
+static DEFINE_TIMER(stats_timer, idt77105_stats_timer_func);
+static DEFINE_TIMER(restart_timer, idt77105_restart_timer_func);
+static int start_timer = 1;
+static struct idt77105_priv *idt77105_all = NULL;
+
+/*
+ * Retrieve the value of one of the IDT77105's counters.
+ * `counter' is one of the IDT77105_CTRSEL_* constants.
+ */
+static u16 get_counter(struct atm_dev *dev, int counter)
+{
+        u16 val;
+        
+        /* write the counter bit into PHY register 6 */
+        PUT(counter, CTRSEL);
+        /* read the low 8 bits from register 4 */
+        val = GET(CTRLO);
+        /* read the high 8 bits from register 5 */
+        val |= GET(CTRHI)<<8;
+        
+        return val;
+}
+
+/*
+ * Timer function called every second to gather statistics
+ * from the 77105. This is done because the h/w registers
+ * will overflow if not read at least once per second. The
+ * kernel's stats are much higher precision. Also, having
+ * a separate copy of the stats allows implementation of
+ * an ioctl which gathers the stats *without* zero'ing them.
+ */
+static void idt77105_stats_timer_func(struct timer_list *unused)
+{
+	struct idt77105_priv *walk;
+	struct atm_dev *dev;
+	struct idt77105_stats *stats;
+
+        DPRINTK("IDT77105 gathering statistics\n");
+	for (walk = idt77105_all; walk; walk = walk->next) {
+		dev = walk->dev;
+                
+		stats = &walk->stats;
+                stats->symbol_errors += get_counter(dev, IDT77105_CTRSEL_SEC);
+                stats->tx_cells += get_counter(dev, IDT77105_CTRSEL_TCC);
+                stats->rx_cells += get_counter(dev, IDT77105_CTRSEL_RCC);
+                stats->rx_hec_errors += get_counter(dev, IDT77105_CTRSEL_RHEC);
+	}
+        if (!start_timer) mod_timer(&stats_timer,jiffies+IDT77105_STATS_TIMER_PERIOD);
+}
+
+
+/*
+ * A separate timer func which handles restarting PHY chips which
+ * have had the cable re-inserted after being pulled out. This is
+ * done by polling the Good Signal Bit in the Interrupt Status
+ * register every 5 seconds. The other technique (checking Good
+ * Signal Bit in the interrupt handler) cannot be used because PHY
+ * interrupts need to be disabled when the cable is pulled out
+ * to avoid lots of spurious cell error interrupts.
+ */
+static void idt77105_restart_timer_func(struct timer_list *unused)
+{
+	struct idt77105_priv *walk;
+	struct atm_dev *dev;
+        unsigned char istat;
+
+        DPRINTK("IDT77105 checking for cable re-insertion\n");
+	for (walk = idt77105_all; walk; walk = walk->next) {
+		dev = walk->dev;
+                
+                if (dev->signal != ATM_PHY_SIG_LOST)
+                    continue;
+                    
+                istat = GET(ISTAT); /* side effect: clears all interrupt status bits */
+                if (istat & IDT77105_ISTAT_GOODSIG) {
+                    /* Found signal again */
+                    atm_dev_signal_change(dev, ATM_PHY_SIG_FOUND);
+	            printk(KERN_NOTICE "%s(itf %d): signal detected again\n",
+                        dev->type,dev->number);
+                    /* flush the receive FIFO */
+                    PUT( GET(DIAG) | IDT77105_DIAG_RFLUSH, DIAG);
+                    /* re-enable interrupts */
+	            PUT( walk->old_mcr ,MCR);
+                }
+	}
+        if (!start_timer) mod_timer(&restart_timer,jiffies+IDT77105_RESTART_TIMER_PERIOD);
+}
+
+
+static int fetch_stats(struct atm_dev *dev,struct idt77105_stats __user *arg,int zero)
+{
+	unsigned long flags;
+	struct idt77105_stats stats;
+
+	spin_lock_irqsave(&idt77105_priv_lock, flags);
+	memcpy(&stats, &PRIV(dev)->stats, sizeof(struct idt77105_stats));
+	if (zero)
+		memset(&PRIV(dev)->stats, 0, sizeof(struct idt77105_stats));
+	spin_unlock_irqrestore(&idt77105_priv_lock, flags);
+	if (arg == NULL)
+		return 0;
+	return copy_to_user(arg, &stats,
+		    sizeof(struct idt77105_stats)) ? -EFAULT : 0;
+}
+
+
+static int set_loopback(struct atm_dev *dev,int mode)
+{
+	int diag;
+
+	diag = GET(DIAG) & ~IDT77105_DIAG_LCMASK;
+	switch (mode) {
+		case ATM_LM_NONE:
+			break;
+		case ATM_LM_LOC_ATM:
+			diag |= IDT77105_DIAG_LC_PHY_LOOPBACK;
+			break;
+		case ATM_LM_RMT_ATM:
+			diag |= IDT77105_DIAG_LC_LINE_LOOPBACK;
+			break;
+		default:
+			return -EINVAL;
+	}
+	PUT(diag,DIAG);
+	printk(KERN_NOTICE "%s(%d) Loopback mode is: %s\n", dev->type,
+	    dev->number,
+	    (mode == ATM_LM_NONE ? "NONE" : 
+	      (mode == ATM_LM_LOC_ATM ? "DIAG (local)" :
+		(mode == IDT77105_DIAG_LC_LINE_LOOPBACK ? "LOOP (remote)" :
+		  "unknown")))
+		    );
+	PRIV(dev)->loop_mode = mode;
+	return 0;
+}
+
+
+static int idt77105_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg)
+{
+        printk(KERN_NOTICE "%s(%d) idt77105_ioctl() called\n",dev->type,dev->number);
+	switch (cmd) {
+		case IDT77105_GETSTATZ:
+			if (!capable(CAP_NET_ADMIN)) return -EPERM;
+			fallthrough;
+		case IDT77105_GETSTAT:
+			return fetch_stats(dev, arg, cmd == IDT77105_GETSTATZ);
+		case ATM_SETLOOP:
+			return set_loopback(dev,(int)(unsigned long) arg);
+		case ATM_GETLOOP:
+			return put_user(PRIV(dev)->loop_mode,(int __user *)arg) ?
+			    -EFAULT : 0;
+		case ATM_QUERYLOOP:
+			return put_user(ATM_LM_LOC_ATM | ATM_LM_RMT_ATM,
+			    (int __user *) arg) ? -EFAULT : 0;
+		default:
+			return -ENOIOCTLCMD;
+	}
+}
+
+
+
+static void idt77105_int(struct atm_dev *dev)
+{
+        unsigned char istat;
+        
+        istat = GET(ISTAT); /* side effect: clears all interrupt status bits */
+     
+        DPRINTK("IDT77105 generated an interrupt, istat=%02x\n", (unsigned)istat);
+                
+        if (istat & IDT77105_ISTAT_RSCC) {
+            /* Rx Signal Condition Change - line went up or down */
+            if (istat & IDT77105_ISTAT_GOODSIG) {   /* signal detected again */
+                /* This should not happen (restart timer does it) but JIC */
+		atm_dev_signal_change(dev, ATM_PHY_SIG_FOUND);
+            } else {    /* signal lost */
+                /*
+                 * Disable interrupts and stop all transmission and
+                 * reception - the restart timer will restore these.
+                 */
+                PRIV(dev)->old_mcr = GET(MCR);
+	        PUT(
+                    (PRIV(dev)->old_mcr|
+                    IDT77105_MCR_DREC|
+                    IDT77105_MCR_DRIC|
+                    IDT77105_MCR_HALTTX
+                    ) & ~IDT77105_MCR_EIP, MCR);
+		atm_dev_signal_change(dev, ATM_PHY_SIG_LOST);
+	        printk(KERN_NOTICE "%s(itf %d): signal lost\n",
+                    dev->type,dev->number);
+            }
+        }
+        
+        if (istat & IDT77105_ISTAT_RFO) {
+            /* Rx FIFO Overrun -- perform a FIFO flush */
+            PUT( GET(DIAG) | IDT77105_DIAG_RFLUSH, DIAG);
+	    printk(KERN_NOTICE "%s(itf %d): receive FIFO overrun\n",
+                dev->type,dev->number);
+        }
+#ifdef GENERAL_DEBUG
+        if (istat & (IDT77105_ISTAT_HECERR | IDT77105_ISTAT_SCR |
+                     IDT77105_ISTAT_RSE)) {
+            /* normally don't care - just report in stats */
+	    printk(KERN_NOTICE "%s(itf %d): received cell with error\n",
+                dev->type,dev->number);
+        }
+#endif
+}
+
+
+static int idt77105_start(struct atm_dev *dev)
+{
+	unsigned long flags;
+
+	if (!(dev->phy_data = kmalloc(sizeof(struct idt77105_priv),GFP_KERNEL)))
+		return -ENOMEM;
+	PRIV(dev)->dev = dev;
+	spin_lock_irqsave(&idt77105_priv_lock, flags);
+	PRIV(dev)->next = idt77105_all;
+	idt77105_all = PRIV(dev);
+	spin_unlock_irqrestore(&idt77105_priv_lock, flags);
+	memset(&PRIV(dev)->stats,0,sizeof(struct idt77105_stats));
+        
+        /* initialise dev->signal from Good Signal Bit */
+	atm_dev_signal_change(dev,
+		GET(ISTAT) & IDT77105_ISTAT_GOODSIG ?
+		ATM_PHY_SIG_FOUND : ATM_PHY_SIG_LOST);
+	if (dev->signal == ATM_PHY_SIG_LOST)
+		printk(KERN_WARNING "%s(itf %d): no signal\n",dev->type,
+		    dev->number);
+
+        /* initialise loop mode from hardware */
+        switch ( GET(DIAG) & IDT77105_DIAG_LCMASK ) {
+        case IDT77105_DIAG_LC_NORMAL:
+            PRIV(dev)->loop_mode = ATM_LM_NONE;
+            break;
+        case IDT77105_DIAG_LC_PHY_LOOPBACK:
+            PRIV(dev)->loop_mode = ATM_LM_LOC_ATM;
+            break;
+        case IDT77105_DIAG_LC_LINE_LOOPBACK:
+            PRIV(dev)->loop_mode = ATM_LM_RMT_ATM;
+            break;
+        }
+        
+        /* enable interrupts, e.g. on loss of signal */
+        PRIV(dev)->old_mcr = GET(MCR);
+        if (dev->signal == ATM_PHY_SIG_FOUND) {
+            PRIV(dev)->old_mcr |= IDT77105_MCR_EIP;
+	    PUT(PRIV(dev)->old_mcr, MCR);
+        }
+
+                    
+	idt77105_stats_timer_func(0); /* clear 77105 counters */
+	(void) fetch_stats(dev,NULL,1); /* clear kernel counters */
+        
+	spin_lock_irqsave(&idt77105_priv_lock, flags);
+	if (start_timer) {
+		start_timer = 0;
+                
+		stats_timer.expires = jiffies+IDT77105_STATS_TIMER_PERIOD;
+		add_timer(&stats_timer);
+                
+		restart_timer.expires = jiffies+IDT77105_RESTART_TIMER_PERIOD;
+		add_timer(&restart_timer);
+	}
+	spin_unlock_irqrestore(&idt77105_priv_lock, flags);
+	return 0;
+}
+
+
+static int idt77105_stop(struct atm_dev *dev)
+{
+	struct idt77105_priv *walk, *prev;
+
+        DPRINTK("%s(itf %d): stopping IDT77105\n",dev->type,dev->number);
+        
+        /* disable interrupts */
+	PUT( GET(MCR) & ~IDT77105_MCR_EIP, MCR );
+        
+        /* detach private struct from atm_dev & free */
+	for (prev = NULL, walk = idt77105_all ;
+             walk != NULL;
+             prev = walk, walk = walk->next) {
+            if (walk->dev == dev) {
+                if (prev != NULL)
+                    prev->next = walk->next;
+                else
+                    idt77105_all = walk->next;
+	        dev->phy = NULL;
+                dev->phy_data = NULL;
+                kfree(walk);
+                break;
+            }
+        }
+
+	return 0;
+}
+
+
+static const struct atmphy_ops idt77105_ops = {
+	.start = 	idt77105_start,
+	.ioctl =	idt77105_ioctl,
+	.interrupt =	idt77105_int,
+	.stop =		idt77105_stop,
+};
+
+
+int idt77105_init(struct atm_dev *dev)
+{
+	dev->phy = &idt77105_ops;
+	return 0;
+}
+
+EXPORT_SYMBOL(idt77105_init);
+
+static void __exit idt77105_exit(void)
+{
+	/* turn off timers */
+	del_timer_sync(&stats_timer);
+	del_timer_sync(&restart_timer);
+}
+
+module_exit(idt77105_exit);
+
+MODULE_LICENSE("GPL");