Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 428 insertions, 0 deletions

diff --git a/drivers/block/drbd/drbd_protocol.h b/drivers/block/drbd/drbd_protocol.h
new file mode 100644
index 000000000..56bbca9d7
--- /dev/null
+++ b/drivers/block/drbd/drbd_protocol.h
@@ -0,0 +1,428 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __DRBD_PROTOCOL_H
+#define __DRBD_PROTOCOL_H
+
+enum drbd_packet {
+	/* receiver (data socket) */
+	P_DATA		      = 0x00,
+	P_DATA_REPLY	      = 0x01, /* Response to P_DATA_REQUEST */
+	P_RS_DATA_REPLY	      = 0x02, /* Response to P_RS_DATA_REQUEST */
+	P_BARRIER	      = 0x03,
+	P_BITMAP	      = 0x04,
+	P_BECOME_SYNC_TARGET  = 0x05,
+	P_BECOME_SYNC_SOURCE  = 0x06,
+	P_UNPLUG_REMOTE	      = 0x07, /* Used at various times to hint the peer */
+	P_DATA_REQUEST	      = 0x08, /* Used to ask for a data block */
+	P_RS_DATA_REQUEST     = 0x09, /* Used to ask for a data block for resync */
+	P_SYNC_PARAM	      = 0x0a,
+	P_PROTOCOL	      = 0x0b,
+	P_UUIDS		      = 0x0c,
+	P_SIZES		      = 0x0d,
+	P_STATE		      = 0x0e,
+	P_SYNC_UUID	      = 0x0f,
+	P_AUTH_CHALLENGE      = 0x10,
+	P_AUTH_RESPONSE	      = 0x11,
+	P_STATE_CHG_REQ	      = 0x12,
+
+	/* (meta socket) */
+	P_PING		      = 0x13,
+	P_PING_ACK	      = 0x14,
+	P_RECV_ACK	      = 0x15, /* Used in protocol B */
+	P_WRITE_ACK	      = 0x16, /* Used in protocol C */
+	P_RS_WRITE_ACK	      = 0x17, /* Is a P_WRITE_ACK, additionally call set_in_sync(). */
+	P_SUPERSEDED	      = 0x18, /* Used in proto C, two-primaries conflict detection */
+	P_NEG_ACK	      = 0x19, /* Sent if local disk is unusable */
+	P_NEG_DREPLY	      = 0x1a, /* Local disk is broken... */
+	P_NEG_RS_DREPLY	      = 0x1b, /* Local disk is broken... */
+	P_BARRIER_ACK	      = 0x1c,
+	P_STATE_CHG_REPLY     = 0x1d,
+
+	/* "new" commands, no longer fitting into the ordering scheme above */
+
+	P_OV_REQUEST	      = 0x1e, /* data socket */
+	P_OV_REPLY	      = 0x1f,
+	P_OV_RESULT	      = 0x20, /* meta socket */
+	P_CSUM_RS_REQUEST     = 0x21, /* data socket */
+	P_RS_IS_IN_SYNC	      = 0x22, /* meta socket */
+	P_SYNC_PARAM89	      = 0x23, /* data socket, protocol version 89 replacement for P_SYNC_PARAM */
+	P_COMPRESSED_BITMAP   = 0x24, /* compressed or otherwise encoded bitmap transfer */
+	/* P_CKPT_FENCE_REQ      = 0x25, * currently reserved for protocol D */
+	/* P_CKPT_DISABLE_REQ    = 0x26, * currently reserved for protocol D */
+	P_DELAY_PROBE         = 0x27, /* is used on BOTH sockets */
+	P_OUT_OF_SYNC         = 0x28, /* Mark as out of sync (Outrunning), data socket */
+	P_RS_CANCEL           = 0x29, /* meta: Used to cancel RS_DATA_REQUEST packet by SyncSource */
+	P_CONN_ST_CHG_REQ     = 0x2a, /* data sock: Connection wide state request */
+	P_CONN_ST_CHG_REPLY   = 0x2b, /* meta sock: Connection side state req reply */
+	P_RETRY_WRITE	      = 0x2c, /* Protocol C: retry conflicting write request */
+	P_PROTOCOL_UPDATE     = 0x2d, /* data sock: is used in established connections */
+        /* 0x2e to 0x30 reserved, used in drbd 9 */
+
+	/* REQ_OP_DISCARD. We used "discard" in different contexts before,
+	 * which is why I chose TRIM here, to disambiguate. */
+	P_TRIM                = 0x31,
+
+	/* Only use these two if both support FF_THIN_RESYNC */
+	P_RS_THIN_REQ         = 0x32, /* Request a block for resync or reply P_RS_DEALLOCATED */
+	P_RS_DEALLOCATED      = 0x33, /* Contains only zeros on sync source node */
+
+	/* REQ_WRITE_SAME.
+	 * On a receiving side without REQ_WRITE_SAME,
+	 * we may fall back to an opencoded loop instead. */
+	P_WSAME               = 0x34,
+
+	/* 0x35 already claimed in DRBD 9 */
+	P_ZEROES              = 0x36, /* data sock: zero-out, WRITE_ZEROES */
+
+	/* 0x40 .. 0x48 already claimed in DRBD 9 */
+
+	P_MAY_IGNORE	      = 0x100, /* Flag to test if (cmd > P_MAY_IGNORE) ... */
+	P_MAX_OPT_CMD	      = 0x101,
+
+	/* special command ids for handshake */
+
+	P_INITIAL_META	      = 0xfff1, /* First Packet on the MetaSock */
+	P_INITIAL_DATA	      = 0xfff2, /* First Packet on the Socket */
+
+	P_CONNECTION_FEATURES = 0xfffe	/* FIXED for the next century! */
+};
+
+#ifndef __packed
+#define __packed __attribute__((packed))
+#endif
+
+/* This is the layout for a packet on the wire.
+ * The byteorder is the network byte order.
+ *     (except block_id and barrier fields.
+ *	these are pointers to local structs
+ *	and have no relevance for the partner,
+ *	which just echoes them as received.)
+ *
+ * NOTE that the payload starts at a long aligned offset,
+ * regardless of 32 or 64 bit arch!
+ */
+struct p_header80 {
+	u32	  magic;
+	u16	  command;
+	u16	  length;	/* bytes of data after this header */
+} __packed;
+
+/* Header for big packets, Used for data packets exceeding 64kB */
+struct p_header95 {
+	u16	  magic;	/* use DRBD_MAGIC_BIG here */
+	u16	  command;
+	u32	  length;
+} __packed;
+
+struct p_header100 {
+	u32	  magic;
+	u16	  volume;
+	u16	  command;
+	u32	  length;
+	u32	  pad;
+} __packed;
+
+/* These defines must not be changed without changing the protocol version.
+ * New defines may only be introduced together with protocol version bump or
+ * new protocol feature flags.
+ */
+#define DP_HARDBARRIER	      1 /* no longer used */
+#define DP_RW_SYNC	      2 /* equals REQ_SYNC    */
+#define DP_MAY_SET_IN_SYNC    4
+#define DP_UNPLUG             8 /* not used anymore   */
+#define DP_FUA               16 /* equals REQ_FUA     */
+#define DP_FLUSH             32 /* equals REQ_PREFLUSH   */
+#define DP_DISCARD           64 /* equals REQ_OP_DISCARD */
+#define DP_SEND_RECEIVE_ACK 128 /* This is a proto B write request */
+#define DP_SEND_WRITE_ACK   256 /* This is a proto C write request */
+#define DP_WSAME            512 /* equiv. REQ_WRITE_SAME */
+#define DP_ZEROES          1024 /* equiv. REQ_OP_WRITE_ZEROES */
+
+/* possible combinations:
+ * REQ_OP_WRITE_ZEROES:  DP_DISCARD | DP_ZEROES
+ * REQ_OP_WRITE_ZEROES + REQ_NOUNMAP: DP_ZEROES
+ */
+
+struct p_data {
+	u64	    sector;    /* 64 bits sector number */
+	u64	    block_id;  /* to identify the request in protocol B&C */
+	u32	    seq_num;
+	u32	    dp_flags;
+} __packed;
+
+struct p_trim {
+	struct p_data p_data;
+	u32	    size;	/* == bio->bi_size */
+} __packed;
+
+struct p_wsame {
+	struct p_data p_data;
+	u32           size;     /* == bio->bi_size */
+} __packed;
+
+/*
+ * commands which share a struct:
+ *  p_block_ack:
+ *   P_RECV_ACK (proto B), P_WRITE_ACK (proto C),
+ *   P_SUPERSEDED (proto C, two-primaries conflict detection)
+ *  p_block_req:
+ *   P_DATA_REQUEST, P_RS_DATA_REQUEST
+ */
+struct p_block_ack {
+	u64	    sector;
+	u64	    block_id;
+	u32	    blksize;
+	u32	    seq_num;
+} __packed;
+
+struct p_block_req {
+	u64 sector;
+	u64 block_id;
+	u32 blksize;
+	u32 pad;	/* to multiple of 8 Byte */
+} __packed;
+
+/*
+ * commands with their own struct for additional fields:
+ *   P_CONNECTION_FEATURES
+ *   P_BARRIER
+ *   P_BARRIER_ACK
+ *   P_SYNC_PARAM
+ *   ReportParams
+ */
+
+/* supports TRIM/DISCARD on the "wire" protocol */
+#define DRBD_FF_TRIM 1
+
+/* Detect all-zeros during resync, and rather TRIM/UNMAP/DISCARD those blocks
+ * instead of fully allocate a supposedly thin volume on initial resync */
+#define DRBD_FF_THIN_RESYNC 2
+
+/* supports REQ_WRITE_SAME on the "wire" protocol.
+ * Note: this flag is overloaded,
+ * its presence also
+ *   - indicates support for 128 MiB "batch bios",
+ *     max discard size of 128 MiB
+ *     instead of 4M before that.
+ *   - indicates that we exchange additional settings in p_sizes
+ *     drbd_send_sizes()/receive_sizes()
+ */
+#define DRBD_FF_WSAME 4
+
+/* supports REQ_OP_WRITE_ZEROES on the "wire" protocol.
+ *
+ * We used to map that to "discard" on the sending side, and if we cannot
+ * guarantee that discard zeroes data, the receiving side would map discard
+ * back to zero-out.
+ *
+ * With the introduction of REQ_OP_WRITE_ZEROES,
+ * we started to use that for both WRITE_ZEROES and DISCARDS,
+ * hoping that WRITE_ZEROES would "do what we want",
+ * UNMAP if possible, zero-out the rest.
+ *
+ * The example scenario is some LVM "thin" backend.
+ *
+ * While an un-allocated block on dm-thin reads as zeroes, on a dm-thin
+ * with "skip_block_zeroing=true", after a partial block write allocated
+ * that block, that same block may well map "undefined old garbage" from
+ * the backends on LBAs that have not yet been written to.
+ *
+ * If we cannot distinguish between zero-out and discard on the receiving
+ * side, to avoid "undefined old garbage" to pop up randomly at later times
+ * on supposedly zero-initialized blocks, we'd need to map all discards to
+ * zero-out on the receiving side.  But that would potentially do a full
+ * alloc on thinly provisioned backends, even when the expectation was to
+ * unmap/trim/discard/de-allocate.
+ *
+ * We need to distinguish on the protocol level, whether we need to guarantee
+ * zeroes (and thus use zero-out, potentially doing the mentioned full-alloc),
+ * or if we want to put the emphasis on discard, and only do a "best effort
+ * zeroing" (by "discarding" blocks aligned to discard-granularity, and zeroing
+ * only potential unaligned head and tail clippings), to at least *try* to
+ * avoid "false positives" in an online-verify later, hoping that someone
+ * set skip_block_zeroing=false.
+ */
+#define DRBD_FF_WZEROES 8
+
+
+struct p_connection_features {
+	u32 protocol_min;
+	u32 feature_flags;
+	u32 protocol_max;
+
+	/* should be more than enough for future enhancements
+	 * for now, feature_flags and the reserved array shall be zero.
+	 */
+
+	u32 _pad;
+	u64 reserved[7];
+} __packed;
+
+struct p_barrier {
+	u32 barrier;	/* barrier number _handle_ only */
+	u32 pad;	/* to multiple of 8 Byte */
+} __packed;
+
+struct p_barrier_ack {
+	u32 barrier;
+	u32 set_size;
+} __packed;
+
+struct p_rs_param {
+	u32 resync_rate;
+
+	      /* Since protocol version 88 and higher. */
+	char verify_alg[];
+} __packed;
+
+struct p_rs_param_89 {
+	u32 resync_rate;
+	/* protocol version 89: */
+	char verify_alg[SHARED_SECRET_MAX];
+	char csums_alg[SHARED_SECRET_MAX];
+} __packed;
+
+struct p_rs_param_95 {
+	u32 resync_rate;
+	struct_group(algs,
+		char verify_alg[SHARED_SECRET_MAX];
+		char csums_alg[SHARED_SECRET_MAX];
+	);
+	u32 c_plan_ahead;
+	u32 c_delay_target;
+	u32 c_fill_target;
+	u32 c_max_rate;
+} __packed;
+
+enum drbd_conn_flags {
+	CF_DISCARD_MY_DATA = 1,
+	CF_DRY_RUN = 2,
+};
+
+struct p_protocol {
+	u32 protocol;
+	u32 after_sb_0p;
+	u32 after_sb_1p;
+	u32 after_sb_2p;
+	u32 conn_flags;
+	u32 two_primaries;
+
+	/* Since protocol version 87 and higher. */
+	char integrity_alg[];
+
+} __packed;
+
+struct p_uuids {
+	u64 uuid[UI_EXTENDED_SIZE];
+} __packed;
+
+struct p_rs_uuid {
+	u64	    uuid;
+} __packed;
+
+/* optional queue_limits if (agreed_features & DRBD_FF_WSAME)
+ * see also struct queue_limits, as of late 2015 */
+struct o_qlim {
+	/* we don't need it yet, but we may as well communicate it now */
+	u32 physical_block_size;
+
+	/* so the original in struct queue_limits is unsigned short,
+	 * but I'd have to put in padding anyways. */
+	u32 logical_block_size;
+
+	/* One incoming bio becomes one DRBD request,
+	 * which may be translated to several bio on the receiving side.
+	 * We don't need to communicate chunk/boundary/segment ... limits.
+	 */
+
+	/* various IO hints may be useful with "diskless client" setups */
+	u32 alignment_offset;
+	u32 io_min;
+	u32 io_opt;
+
+	/* We may need to communicate integrity stuff at some point,
+	 * but let's not get ahead of ourselves. */
+
+	/* Backend discard capabilities.
+	 * Receiving side uses "blkdev_issue_discard()", no need to communicate
+	 * more specifics.  If the backend cannot do discards, the DRBD peer
+	 * may fall back to blkdev_issue_zeroout().
+	 */
+	u8 discard_enabled;
+	u8 discard_zeroes_data;
+	u8 write_same_capable;
+	u8 _pad;
+} __packed;
+
+struct p_sizes {
+	u64	    d_size;  /* size of disk */
+	u64	    u_size;  /* user requested size */
+	u64	    c_size;  /* current exported size */
+	u32	    max_bio_size;  /* Maximal size of a BIO */
+	u16	    queue_order_type;  /* not yet implemented in DRBD*/
+	u16	    dds_flags; /* use enum dds_flags here. */
+
+	/* optional queue_limits if (agreed_features & DRBD_FF_WSAME) */
+	struct o_qlim qlim[];
+} __packed;
+
+struct p_state {
+	u32	    state;
+} __packed;
+
+struct p_req_state {
+	u32	    mask;
+	u32	    val;
+} __packed;
+
+struct p_req_state_reply {
+	u32	    retcode;
+} __packed;
+
+struct p_drbd06_param {
+	u64	  size;
+	u32	  state;
+	u32	  blksize;
+	u32	  protocol;
+	u32	  version;
+	u32	  gen_cnt[5];
+	u32	  bit_map_gen[5];
+} __packed;
+
+struct p_block_desc {
+	u64 sector;
+	u32 blksize;
+	u32 pad;	/* to multiple of 8 Byte */
+} __packed;
+
+/* Valid values for the encoding field.
+ * Bump proto version when changing this. */
+enum drbd_bitmap_code {
+	/* RLE_VLI_Bytes = 0,
+	 * and other bit variants had been defined during
+	 * algorithm evaluation. */
+	RLE_VLI_Bits = 2,
+};
+
+struct p_compressed_bm {
+	/* (encoding & 0x0f): actual encoding, see enum drbd_bitmap_code
+	 * (encoding & 0x80): polarity (set/unset) of first runlength
+	 * ((encoding >> 4) & 0x07): pad_bits, number of trailing zero bits
+	 * used to pad up to head.length bytes
+	 */
+	u8 encoding;
+
+	u8 code[];
+} __packed;
+
+struct p_delay_probe93 {
+	u32     seq_num; /* sequence number to match the two probe packets */
+	u32     offset;  /* usecs the probe got sent after the reference time point */
+} __packed;
+
+/*
+ * Bitmap packets need to fit within a single page on the sender and receiver,
+ * so we are limited to 4 KiB (and not to PAGE_SIZE, which can be bigger).
+ */
+#define DRBD_SOCKET_BUFFER_SIZE 4096
+
+#endif  /* __DRBD_PROTOCOL_H */